-
Question 1
Incorrect
-
A 72 year old male patient is brought into the emergency department with suspected COVID-19 pneumonia and sepsis. It is decided to intubate him pending transfer to ITU. Your consultant requests you prepare propofol and suxamethonium for rapid sequence intubation. What class of drug is suxamethonium?
Your Answer: Non-depolarising neuromuscular blocker
Correct Answer: Depolarising neuromuscular blocker
Explanation:Suxamethonium, also called succinylcholine, is currently the sole depolarising neuromuscular blocking drug used in clinical settings. It functions by binding to acetylcholine (Ach) receptors as an agonist. Unlike acetylcholine, it is not broken down by acetylcholinesterase, leading to a longer duration of binding and prolonged inhibition of neuromuscular transmission. Eventually, it is metabolized by plasma cholinesterase (pseudocholinesterase).
Further Reading:
Rapid sequence induction (RSI) is a method used to place an endotracheal tube (ETT) in the trachea while minimizing the risk of aspiration. It involves inducing loss of consciousness while applying cricoid pressure, followed by intubation without face mask ventilation. The steps of RSI can be remembered using the 7 P’s: preparation, pre-oxygenation, pre-treatment, paralysis and induction, protection and positioning, placement with proof, and post-intubation management.
Preparation involves preparing the patient, equipment, team, and anticipating any difficulties that may arise during the procedure. Pre-oxygenation is important to ensure the patient has an adequate oxygen reserve and prolongs the time before desaturation. This is typically done by breathing 100% oxygen for 3 minutes. Pre-treatment involves administering drugs to counter expected side effects of the procedure and anesthesia agents used.
Paralysis and induction involve administering a rapid-acting induction agent followed by a neuromuscular blocking agent. Commonly used induction agents include propofol, ketamine, thiopentone, and etomidate. The neuromuscular blocking agents can be depolarizing (such as suxamethonium) or non-depolarizing (such as rocuronium). Depolarizing agents bind to acetylcholine receptors and generate an action potential, while non-depolarizing agents act as competitive antagonists.
Protection and positioning involve applying cricoid pressure to prevent regurgitation of gastric contents and positioning the patient’s neck appropriately. Tube placement is confirmed by visualizing the tube passing between the vocal cords, auscultation of the chest and stomach, end-tidal CO2 measurement, and visualizing misting of the tube. Post-intubation management includes standard care such as monitoring ECG, SpO2, NIBP, capnography, and maintaining sedation and neuromuscular blockade.
Overall, RSI is a technique used to quickly and safely secure the airway in patients who may be at risk of aspiration. It involves a series of steps to ensure proper preparation, oxygenation, drug administration, and tube placement. Monitoring and post-intubation care are also important aspects of RSI.
-
This question is part of the following fields:
- Basic Anaesthetics
-
-
Question 2
Incorrect
-
A 45 year old male patient is brought into the emergency department with a suspected severe pulmonary embolism. It is decided to intubate him pending transfer to the intensive care unit. Your consultant requests you prepare the patient for rapid sequence intubation. You start pre-oxygenating the patient. What is the recommended minimum duration for sufficient pre-oxygenation?
Your Answer: 1 minute
Correct Answer: 3 minutes
Explanation:Inspired oxygen primarily works by removing nitrogen from the lungs, which would otherwise take up a significant portion of the lung capacity. This nitrogen is replaced with oxygen, leading to improved oxygenation of the tissues and an increased oxygen reserve. As a result, the patient can safely hold their breath for a longer period of time. It is recommended to preoxygenate the patient for at least 3 minutes.
Further Reading:
Rapid sequence induction (RSI) is a method used to place an endotracheal tube (ETT) in the trachea while minimizing the risk of aspiration. It involves inducing loss of consciousness while applying cricoid pressure, followed by intubation without face mask ventilation. The steps of RSI can be remembered using the 7 P’s: preparation, pre-oxygenation, pre-treatment, paralysis and induction, protection and positioning, placement with proof, and post-intubation management.
Preparation involves preparing the patient, equipment, team, and anticipating any difficulties that may arise during the procedure. Pre-oxygenation is important to ensure the patient has an adequate oxygen reserve and prolongs the time before desaturation. This is typically done by breathing 100% oxygen for 3 minutes. Pre-treatment involves administering drugs to counter expected side effects of the procedure and anesthesia agents used.
Paralysis and induction involve administering a rapid-acting induction agent followed by a neuromuscular blocking agent. Commonly used induction agents include propofol, ketamine, thiopentone, and etomidate. The neuromuscular blocking agents can be depolarizing (such as suxamethonium) or non-depolarizing (such as rocuronium). Depolarizing agents bind to acetylcholine receptors and generate an action potential, while non-depolarizing agents act as competitive antagonists.
Protection and positioning involve applying cricoid pressure to prevent regurgitation of gastric contents and positioning the patient’s neck appropriately. Tube placement is confirmed by visualizing the tube passing between the vocal cords, auscultation of the chest and stomach, end-tidal CO2 measurement, and visualizing misting of the tube. Post-intubation management includes standard care such as monitoring ECG, SpO2, NIBP, capnography, and maintaining sedation and neuromuscular blockade.
Overall, RSI is a technique used to quickly and safely secure the airway in patients who may be at risk of aspiration. It involves a series of steps to ensure proper preparation, oxygenation, drug administration, and tube placement. Monitoring and post-intubation care are also important aspects of RSI.
-
This question is part of the following fields:
- Basic Anaesthetics
-
-
Question 3
Correct
-
You are summoned to assist with a 72-year-old patient who is in the resuscitation bay and has experienced two defibrillation attempts following cardiac arrest. Unfortunately, there is no supply of amiodarone available, so your consultant instructs you to prepare lidocaine for administration after the next shock. What is the initial dosage of lidocaine to be given during cardiac arrest?
Your Answer: 1 mg/kg
Explanation:During cardiac arrest, Lidocaine is administered through a slow IV injection at an initial dose of 1 mg/kg when deemed suitable.
Further Reading:
In the management of respiratory and cardiac arrest, several drugs are commonly used to help restore normal function and improve outcomes. Adrenaline is a non-selective agonist of adrenergic receptors and is administered intravenously at a dose of 1 mg every 3-5 minutes. It works by causing vasoconstriction, increasing systemic vascular resistance (SVR), and improving cardiac output by increasing the force of heart contraction. Adrenaline also has bronchodilatory effects.
Amiodarone is another drug used in cardiac arrest situations. It blocks voltage-gated potassium channels, which prolongs repolarization and reduces myocardial excitability. The initial dose of amiodarone is 300 mg intravenously after 3 shocks, followed by a dose of 150 mg after 5 shocks.
Lidocaine is an alternative to amiodarone in cardiac arrest situations. It works by blocking sodium channels and decreasing heart rate. The recommended dose is 1 mg/kg by slow intravenous injection, with a repeat half of the initial dose after 5 minutes. The maximum total dose of lidocaine is 3 mg/kg.
Magnesium sulfate is used to reverse myocardial hyperexcitability associated with hypomagnesemia. It is administered intravenously at a dose of 2 g over 10-15 minutes. An additional dose may be given if necessary, but the maximum total dose should not exceed 3 g.
Atropine is an antagonist of muscarinic acetylcholine receptors and is used to counteract the slowing of heart rate caused by the parasympathetic nervous system. It is administered intravenously at a dose of 500 mcg every 3-5 minutes, with a maximum dose of 3 mg.
Naloxone is a competitive antagonist for opioid receptors and is used in cases of respiratory arrest caused by opioid overdose. It has a short duration of action, so careful monitoring is necessary. The initial dose of naloxone is 400 micrograms, followed by 800 mcg after 1 minute. The dose can be gradually escalated up to 2 mg per dose if there is no response to the preceding dose.
It is important for healthcare professionals to have knowledge of the pharmacology and dosing schedules of these drugs in order to effectively manage respiratory and cardiac arrest situations.
-
This question is part of the following fields:
- Basic Anaesthetics
-
-
Question 4
Incorrect
-
What is the main pharmacological factor that influences the speed of onset for local anaesthetic agents, resulting in a rapid onset of action?
Your Answer: Core body temperature
Correct Answer: Lipid Solubility
Explanation:The speed at which local anesthetics take effect is primarily determined by their lipid solubility. The onset of action is directly influenced by how well the anesthetic can dissolve in lipids, which is in turn related to its pKa value. A higher lipid solubility leads to a faster onset of action. The pKa value, which represents the acid-dissociation constant, is an indicator of lipid solubility. An anesthetic agent with a pKa value closer to 7.4 is more likely to be highly lipid soluble.
Further Reading:
Local anaesthetics, such as lidocaine, bupivacaine, and prilocaine, are commonly used in the emergency department for topical or local infiltration to establish a field block. Lidocaine is often the first choice for field block prior to central line insertion. These anaesthetics work by blocking sodium channels, preventing the propagation of action potentials.
However, local anaesthetics can enter the systemic circulation and cause toxic side effects if administered in high doses. Clinicians must be aware of the signs and symptoms of local anaesthetic systemic toxicity (LAST) and know how to respond. Early signs of LAST include numbness around the mouth or tongue, metallic taste, dizziness, visual and auditory disturbances, disorientation, and drowsiness. If not addressed, LAST can progress to more severe symptoms such as seizures, coma, respiratory depression, and cardiovascular dysfunction.
The management of LAST is largely supportive. Immediate steps include stopping the administration of local anaesthetic, calling for help, providing 100% oxygen and securing the airway, establishing IV access, and controlling seizures with benzodiazepines or other medications. Cardiovascular status should be continuously assessed, and conventional therapies may be used to treat hypotension or arrhythmias. Intravenous lipid emulsion (intralipid) may also be considered as a treatment option.
If the patient goes into cardiac arrest, CPR should be initiated following ALS arrest algorithms, but lidocaine should not be used as an anti-arrhythmic therapy. Prolonged resuscitation may be necessary, and intravenous lipid emulsion should be administered. After the acute episode, the patient should be transferred to a clinical area with appropriate equipment and staff for further monitoring and care.
It is important to report cases of local anaesthetic toxicity to the appropriate authorities, such as the National Patient Safety Agency in the UK or the Irish Medicines Board in the Republic of Ireland. Additionally, regular clinical review should be conducted to exclude pancreatitis, as intravenous lipid emulsion can interfere with amylase or lipase assays.
-
This question is part of the following fields:
- Basic Anaesthetics
-
-
Question 5
Incorrect
-
You have just performed rapid sequence induction using ketamine and rocuronium and placed an endotracheal tube under consultant supervision. What is the time interval from administration of rocuronium to the onset of paralysis?
Your Answer: Less than 20 seconds
Correct Answer: 45-60 seconds
Explanation:Both suxamethonium and rocuronium take approximately 45-60 seconds to induce paralysis. The time it takes for rocuronium to cause paralysis is similar to that of suxamethonium, which is also around 45-60 seconds.
Further Reading:
Rapid sequence induction (RSI) is a method used to place an endotracheal tube (ETT) in the trachea while minimizing the risk of aspiration. It involves inducing loss of consciousness while applying cricoid pressure, followed by intubation without face mask ventilation. The steps of RSI can be remembered using the 7 P’s: preparation, pre-oxygenation, pre-treatment, paralysis and induction, protection and positioning, placement with proof, and post-intubation management.
Preparation involves preparing the patient, equipment, team, and anticipating any difficulties that may arise during the procedure. Pre-oxygenation is important to ensure the patient has an adequate oxygen reserve and prolongs the time before desaturation. This is typically done by breathing 100% oxygen for 3 minutes. Pre-treatment involves administering drugs to counter expected side effects of the procedure and anesthesia agents used.
Paralysis and induction involve administering a rapid-acting induction agent followed by a neuromuscular blocking agent. Commonly used induction agents include propofol, ketamine, thiopentone, and etomidate. The neuromuscular blocking agents can be depolarizing (such as suxamethonium) or non-depolarizing (such as rocuronium). Depolarizing agents bind to acetylcholine receptors and generate an action potential, while non-depolarizing agents act as competitive antagonists.
Protection and positioning involve applying cricoid pressure to prevent regurgitation of gastric contents and positioning the patient’s neck appropriately. Tube placement is confirmed by visualizing the tube passing between the vocal cords, auscultation of the chest and stomach, end-tidal CO2 measurement, and visualizing misting of the tube. Post-intubation management includes standard care such as monitoring ECG, SpO2, NIBP, capnography, and maintaining sedation and neuromuscular blockade.
Overall, RSI is a technique used to quickly and safely secure the airway in patients who may be at risk of aspiration. It involves a series of steps to ensure proper preparation, oxygenation, drug administration, and tube placement. Monitoring and post-intubation care are also important aspects of RSI.
-
This question is part of the following fields:
- Basic Anaesthetics
-
-
Question 6
Incorrect
-
A 72-year-old female patient with a 10-day history of productive cough and fever is brought to the emergency department due to her condition worsening over the past 24 hours. Despite initial resuscitation measures, there is minimal improvement, and the decision is made to intubate the patient before transferring her to the intensive care unit for ventilatory and inotropic support. Your consultant requests you to preoxygenate the patient before rapid sequence induction. What is the primary mechanism through which pre-oxygenation exerts its effect?
Your Answer: Increased oxygen content in peripheral tissues
Correct Answer: Denitrogenation of the residual capacity of the lungs
Explanation:During pre-oxygenation, inspired Oxygen primarily works by removing Nitrogen and increasing the presence of Oxygen. Additionally, it helps to optimize the levels of oxygen in the alveolar, arterial, tissue, and venous areas.
Further Reading:
Rapid sequence induction (RSI) is a method used to place an endotracheal tube (ETT) in the trachea while minimizing the risk of aspiration. It involves inducing loss of consciousness while applying cricoid pressure, followed by intubation without face mask ventilation. The steps of RSI can be remembered using the 7 P’s: preparation, pre-oxygenation, pre-treatment, paralysis and induction, protection and positioning, placement with proof, and post-intubation management.
Preparation involves preparing the patient, equipment, team, and anticipating any difficulties that may arise during the procedure. Pre-oxygenation is important to ensure the patient has an adequate oxygen reserve and prolongs the time before desaturation. This is typically done by breathing 100% oxygen for 3 minutes. Pre-treatment involves administering drugs to counter expected side effects of the procedure and anesthesia agents used.
Paralysis and induction involve administering a rapid-acting induction agent followed by a neuromuscular blocking agent. Commonly used induction agents include propofol, ketamine, thiopentone, and etomidate. The neuromuscular blocking agents can be depolarizing (such as suxamethonium) or non-depolarizing (such as rocuronium). Depolarizing agents bind to acetylcholine receptors and generate an action potential, while non-depolarizing agents act as competitive antagonists.
Protection and positioning involve applying cricoid pressure to prevent regurgitation of gastric contents and positioning the patient’s neck appropriately. Tube placement is confirmed by visualizing the tube passing between the vocal cords, auscultation of the chest and stomach, end-tidal CO2 measurement, and visualizing misting of the tube. Post-intubation management includes standard care such as monitoring ECG, SpO2, NIBP, capnography, and maintaining sedation and neuromuscular blockade.
Overall, RSI is a technique used to quickly and safely secure the airway in patients who may be at risk of aspiration. It involves a series of steps to ensure proper preparation, oxygenation, drug administration, and tube placement. Monitoring and post-intubation care are also important aspects of RSI.
-
This question is part of the following fields:
- Basic Anaesthetics
-
-
Question 7
Correct
-
A 42 year old male is brought into the resuscitation bay with multiple injuries after a roof collapse. The patient has extensive bruising on the neck and a fractured femur caused by a beam that fell and crushed his right thigh. Your consultant intends to perform rapid sequence induction (RSI) and intubation. Which of the following medications would be inappropriate for this patient?
Your Answer: Suxamethonium
Explanation:Suxamethonium is a medication that can cause an increase in serum potassium levels by causing potassium to leave muscle cells. This can be a problem in patients who already have high levels of potassium, such as those with crush injuries. Therefore, suxamethonium should not be used in these cases.
Further Reading:
Rapid sequence induction (RSI) is a method used to place an endotracheal tube (ETT) in the trachea while minimizing the risk of aspiration. It involves inducing loss of consciousness while applying cricoid pressure, followed by intubation without face mask ventilation. The steps of RSI can be remembered using the 7 P’s: preparation, pre-oxygenation, pre-treatment, paralysis and induction, protection and positioning, placement with proof, and post-intubation management.
Preparation involves preparing the patient, equipment, team, and anticipating any difficulties that may arise during the procedure. Pre-oxygenation is important to ensure the patient has an adequate oxygen reserve and prolongs the time before desaturation. This is typically done by breathing 100% oxygen for 3 minutes. Pre-treatment involves administering drugs to counter expected side effects of the procedure and anesthesia agents used.
Paralysis and induction involve administering a rapid-acting induction agent followed by a neuromuscular blocking agent. Commonly used induction agents include propofol, ketamine, thiopentone, and etomidate. The neuromuscular blocking agents can be depolarizing (such as suxamethonium) or non-depolarizing (such as rocuronium). Depolarizing agents bind to acetylcholine receptors and generate an action potential, while non-depolarizing agents act as competitive antagonists.
Protection and positioning involve applying cricoid pressure to prevent regurgitation of gastric contents and positioning the patient’s neck appropriately. Tube placement is confirmed by visualizing the tube passing between the vocal cords, auscultation of the chest and stomach, end-tidal CO2 measurement, and visualizing misting of the tube. Post-intubation management includes standard care such as monitoring ECG, SpO2, NIBP, capnography, and maintaining sedation and neuromuscular blockade.
Overall, RSI is a technique used to quickly and safely secure the airway in patients who may be at risk of aspiration. It involves a series of steps to ensure proper preparation, oxygenation, drug administration, and tube placement. Monitoring and post-intubation care are also important aspects of RSI.
-
This question is part of the following fields:
- Basic Anaesthetics
-
-
Question 8
Incorrect
-
A 14 year old male is brought into the emergency department with a dislocated shoulder following a fall from a skateboard. The patient has been receiving Entonox during ambulance transport. What is a contraindication to administering Entonox in this case?
Your Answer: Anaemia
Correct Answer: Pneumothorax
Explanation:Nitrous oxide should not be used in cases where there is trapped air, such as pneumothorax. This is because nitrous oxide can diffuse into the trapped air and increase the pressure, which can be harmful. This can be particularly dangerous in conditions like pneumothorax, where the trapped air can expand and affect breathing, or in cases of intracranial air after a head injury, trapped air after a recent underwater dive, or recent injection of gas into the eye.
Further Reading:
Entonox® is a mixture of 50% nitrous oxide and 50% oxygen that can be used for self-administration to reduce anxiety. It can also be used alongside other anesthesia agents. However, its mechanism of action for anxiety reduction is not fully understood. The Entonox bottles are typically identified by blue and white color-coded collars, but a new standard will replace these with dark blue shoulders in the future. It is important to note that Entonox alone cannot be used as the sole maintenance agent in anesthesia.
One of the effects of nitrous oxide is the second-gas effect, where it speeds up the absorption of other inhaled anesthesia agents. Nitrous oxide enters the alveoli and diffuses into the blood, displacing nitrogen. This displacement causes the remaining alveolar gases to become more concentrated, increasing the fractional content of inhaled anesthesia gases and accelerating the uptake of volatile agents into the blood.
However, when nitrous oxide administration is stopped, it can cause diffusion hypoxia. Nitrous oxide exits the blood and diffuses back into the alveoli, while nitrogen diffuses in the opposite direction. Nitrous oxide enters the alveoli much faster than nitrogen leaves, resulting in the dilution of oxygen within the alveoli. This can lead to diffusion hypoxia, where the oxygen concentration in the alveoli is diluted, potentially causing oxygen deprivation in patients breathing air.
There are certain contraindications for using nitrous oxide, as it can expand in air-filled spaces. It should be avoided in conditions such as head injuries with intracranial air, pneumothorax, recent intraocular gas injection, and entrapped air following a recent underwater dive.
-
This question is part of the following fields:
- Basic Anaesthetics
-
-
Question 9
Incorrect
-
A 68 year old has been brought to the emergency department by ambulance with a history of collapsing shortly after complaining of severe chest pain and difficulty breathing. It has been determined that the patient needs rapid sequence induction after pre-oxygenation. What is the best position for the patient to be in during pre-oxygenation?
Your Answer:
Correct Answer: 20-30 degrees head up tilt
Explanation:Several studies have shown that elevating the head by 20-30 degrees is beneficial for increasing oxygen levels compared to lying flat on the back.
Further Reading:
Rapid sequence induction (RSI) is a method used to place an endotracheal tube (ETT) in the trachea while minimizing the risk of aspiration. It involves inducing loss of consciousness while applying cricoid pressure, followed by intubation without face mask ventilation. The steps of RSI can be remembered using the 7 P’s: preparation, pre-oxygenation, pre-treatment, paralysis and induction, protection and positioning, placement with proof, and post-intubation management.
Preparation involves preparing the patient, equipment, team, and anticipating any difficulties that may arise during the procedure. Pre-oxygenation is important to ensure the patient has an adequate oxygen reserve and prolongs the time before desaturation. This is typically done by breathing 100% oxygen for 3 minutes. Pre-treatment involves administering drugs to counter expected side effects of the procedure and anesthesia agents used.
Paralysis and induction involve administering a rapid-acting induction agent followed by a neuromuscular blocking agent. Commonly used induction agents include propofol, ketamine, thiopentone, and etomidate. The neuromuscular blocking agents can be depolarizing (such as suxamethonium) or non-depolarizing (such as rocuronium). Depolarizing agents bind to acetylcholine receptors and generate an action potential, while non-depolarizing agents act as competitive antagonists.
Protection and positioning involve applying cricoid pressure to prevent regurgitation of gastric contents and positioning the patient’s neck appropriately. Tube placement is confirmed by visualizing the tube passing between the vocal cords, auscultation of the chest and stomach, end-tidal CO2 measurement, and visualizing misting of the tube. Post-intubation management includes standard care such as monitoring ECG, SpO2, NIBP, capnography, and maintaining sedation and neuromuscular blockade.
Overall, RSI is a technique used to quickly and safely secure the airway in patients who may be at risk of aspiration. It involves a series of steps to ensure proper preparation, oxygenation, drug administration, and tube placement. Monitoring and post-intubation care are also important aspects of RSI.
-
This question is part of the following fields:
- Basic Anaesthetics
-
-
Question 10
Incorrect
-
A 25-year-old individual who was attacked with a baseball bat returns from the radiology department after undergoing a CT head scan. The CT images show the presence of intracranial bleeding, and after consulting with the on-call neurosurgical registrar, it is decided that the patient will be transferred to the nearby neurosurgical unit after intubation. How can you determine the amount of oxygen that will be required during the transfer?
Your Answer:
Correct Answer: 2 x Minute Volume (MV) x FiO2 x transfer time in minutes
Explanation:To determine the amount of oxygen needed for a transfer, you can use the formula: 2 x Minute Volume (MV) x FiO2 x transfer time in minutes. This formula calculates the volume of oxygen that should be taken on the transfer. The Minute Volume (MV) represents the expected oxygen consumption. It is recommended to double the expected consumption to account for any unforeseen delays or increased oxygen demand during the transfer. Therefore, the second equation is used to calculate the volume of oxygen that will be taken on the transfer.
Further Reading:
Transfer of critically ill patients in the emergency department is a common occurrence and can involve intra-hospital transfers or transfers to another hospital. However, there are several risks associated with these transfers that doctors need to be aware of and manage effectively.
Technical risks include equipment failure or inadequate equipment, unreliable power or oxygen supply, incompatible equipment, restricted positioning, and restricted monitoring equipment. These technical issues can hinder the ability to detect and treat problems with ventilation, blood pressure control, and arrhythmias during the transfer.
Non-technical risks involve limited personal and medical team during the transfer, isolation and lack of resources in the receiving hospital, and problems with communication and liaison between the origin and destination sites.
Organizational risks can be mitigated by having a dedicated consultant lead for transfers who is responsible for producing guidelines, training staff, standardizing protocols, equipment, and documentation, as well as capturing data and conducting audits.
To optimize the patient’s clinical condition before transfer, several key steps should be taken. These include ensuring a low threshold for intubation and anticipating airway and ventilation problems, securing the endotracheal tube (ETT) and verifying its position, calculating oxygen requirements and ensuring an adequate supply, monitoring for circulatory issues and inserting at least two IV accesses, providing ongoing analgesia and sedation, controlling seizures, and addressing any fractures or temperature changes.
It is also important to have the necessary equipment and personnel for the transfer. Standard monitoring equipment should include ECG, oxygen saturation, blood pressure, temperature, and capnographic monitoring for ventilated patients. Additional monitoring may be required depending on the level of care needed by the patient.
In terms of oxygen supply, it is standard practice to calculate the expected oxygen consumption during transfer and multiply it by two to ensure an additional supply in case of delays. The suggested oxygen supply for transfer can be calculated using the minute volume, fraction of inspired oxygen, and estimated transfer time.
Overall, managing the risks associated with patient transfers requires careful planning, communication, and coordination to ensure the safety and well-being of critically ill patients.
-
This question is part of the following fields:
- Basic Anaesthetics
-
-
Question 11
Incorrect
-
A 27 year old woman is brought into the emergency department with a suspected wrist fracture after tripping at a concert. The patient has been receiving nitrous oxide during ambulance transport. The patient is informed that they can cease inhaling nitrous oxide after receiving opioid pain medication. What is the recommended course of action upon discontinuing nitrous oxide?
Your Answer:
Correct Answer: The patient should have oxygen administered for 5 minutes
Explanation:To prevent diffusion hypoxia, it is recommended to administer supplemental oxygen to patients for about 5 minutes after discontinuing nitrous oxide. This is important because there is a risk of developing diffusion hypoxia after the termination of nitrous oxide.
Further Reading:
Entonox® is a mixture of 50% nitrous oxide and 50% oxygen that can be used for self-administration to reduce anxiety. It can also be used alongside other anesthesia agents. However, its mechanism of action for anxiety reduction is not fully understood. The Entonox bottles are typically identified by blue and white color-coded collars, but a new standard will replace these with dark blue shoulders in the future. It is important to note that Entonox alone cannot be used as the sole maintenance agent in anesthesia.
One of the effects of nitrous oxide is the second-gas effect, where it speeds up the absorption of other inhaled anesthesia agents. Nitrous oxide enters the alveoli and diffuses into the blood, displacing nitrogen. This displacement causes the remaining alveolar gases to become more concentrated, increasing the fractional content of inhaled anesthesia gases and accelerating the uptake of volatile agents into the blood.
However, when nitrous oxide administration is stopped, it can cause diffusion hypoxia. Nitrous oxide exits the blood and diffuses back into the alveoli, while nitrogen diffuses in the opposite direction. Nitrous oxide enters the alveoli much faster than nitrogen leaves, resulting in the dilution of oxygen within the alveoli. This can lead to diffusion hypoxia, where the oxygen concentration in the alveoli is diluted, potentially causing oxygen deprivation in patients breathing air.
There are certain contraindications for using nitrous oxide, as it can expand in air-filled spaces. It should be avoided in conditions such as head injuries with intracranial air, pneumothorax, recent intraocular gas injection, and entrapped air following a recent underwater dive.
-
This question is part of the following fields:
- Basic Anaesthetics
-
-
Question 12
Incorrect
-
You are managing a 42 year old female who has been brought into the emergency department with burns and suspected inhalation injury following a house fire. Due to concerns about the patient's ability to maintain their airway it is decided to proceed with intubation and ventilation. Your initial attempt to intubate the patient fails. What is the maximum number of intubation attempts that should be made?
Your Answer:
Correct Answer: 3
Explanation:According to the guidelines of the Difficult Airway Society, it is recommended to limit intubation attempts to a maximum of three. However, if the first three attempts are unsuccessful, a more experienced colleague may make a fourth attempt. If all four attempts are unsuccessful, the intubation should be declared as a failure.
Further Reading:
A difficult airway refers to a situation where factors have been identified that make airway management more challenging. These factors can include body habitus, head and neck anatomy, mouth characteristics, jaw abnormalities, and neck mobility. The LEMON criteria can be used to predict difficult intubation by assessing these factors. The criteria include looking externally at these factors, evaluating the 3-3-2 rule which assesses the space in the mouth and neck, assessing the Mallampati score which measures the distance between the tongue base and roof of the mouth, and considering any upper airway obstructions or reduced neck mobility.
Direct laryngoscopy is a method used to visualize the larynx and assess the size of the tracheal opening. The Cormack-Lehane grading system can be used to classify the tracheal opening, with higher grades indicating more difficult access. In cases of a failed airway, where intubation attempts are unsuccessful and oxygenation cannot be maintained, the immediate priority is to oxygenate the patient and prevent hypoxic brain injury. This can be done through various measures such as using a bag-valve-mask ventilation, high flow oxygen, suctioning, and optimizing head positioning.
If oxygenation cannot be maintained, it is important to call for help from senior medical professionals and obtain a difficult airway trolley if not already available. If basic airway management techniques do not improve oxygenation, further intubation attempts may be considered using different equipment or techniques. If oxygen saturations remain below 90%, a surgical airway such as a cricothyroidotomy may be necessary.
Post-intubation hypoxia can occur for various reasons, and the mnemonic DOPES can be used to identify and address potential problems. DOPES stands for displacement of the endotracheal tube, obstruction, pneumothorax, equipment failure, and stacked breaths. If intubation attempts fail, a maximum of three attempts should be made before moving to an alternative plan, such as using a laryngeal mask airway or considering a cricothyroidotomy.
-
This question is part of the following fields:
- Basic Anaesthetics
-
-
Question 13
Incorrect
-
A 35 year old female trauma patient is being treated in the resus. It is decided to administer intravenous ketamine for rapid sequence induction, and your consultant requests you to prepare the medication. What is a frequently observed side effect of ketamine?
Your Answer:
Correct Answer: Nystagmus
Explanation:Ketamine administration can lead to various side effects, including nystagmus and diplopia. Other potential side effects include tachycardia, hypertension, laryngospasm, unpleasant hallucinations or emergence phenomena, nausea and vomiting, hypersalivation, increased intracranial and intraocular pressure, and abnormal tonic-clonic movements.
Further Reading:
There are four commonly used induction agents in the UK: propofol, ketamine, thiopentone, and etomidate.
Propofol is a 1% solution that produces significant venodilation and myocardial depression. It can also reduce cerebral perfusion pressure. The typical dose for propofol is 1.5-2.5 mg/kg. However, it can cause side effects such as hypotension, respiratory depression, and pain at the site of injection.
Ketamine is another induction agent that produces a dissociative state. It does not display a dose-response continuum, meaning that the effects do not necessarily increase with higher doses. Ketamine can cause bronchodilation, which is useful in patients with asthma. The initial dose for ketamine is 0.5-2 mg/kg, with a typical IV dose of 1.5 mg/kg. Side effects of ketamine include tachycardia, hypertension, laryngospasm, unpleasant hallucinations, nausea and vomiting, hypersalivation, increased intracranial and intraocular pressure, nystagmus and diplopia, abnormal movements, and skin reactions.
Thiopentone is an ultra-short acting barbiturate that acts on the GABA receptor complex. It decreases cerebral metabolic oxygen and reduces cerebral blood flow and intracranial pressure. The adult dose for thiopentone is 3-5 mg/kg, while the child dose is 5-8 mg/kg. However, these doses should be halved in patients with hypovolemia. Side effects of thiopentone include venodilation, myocardial depression, and hypotension. It is contraindicated in patients with acute porphyrias and myotonic dystrophy.
Etomidate is the most haemodynamically stable induction agent and is useful in patients with hypovolemia, anaphylaxis, and asthma. It has similar cerebral effects to thiopentone. The dose for etomidate is 0.15-0.3 mg/kg. Side effects of etomidate include injection site pain, movement disorders, adrenal insufficiency, and apnoea. It is contraindicated in patients with sepsis due to adrenal suppression.
-
This question is part of the following fields:
- Basic Anaesthetics
-
-
Question 14
Incorrect
-
You examine the X-ray of a 55-year-old male who has fallen onto his extended right hand. The X-ray confirms a fracture of the distal radius with dorsal displacement. Your plan is to perform a reduction of the fracture using intravenous regional anesthesia (Bier's block). While conducting the procedure, you take note of the duration of cuff inflation. What is the maximum duration the cuff should remain inflated?
Your Answer:
Correct Answer: 45 minutes
Explanation:According to the RCEM, the minimum time for cuff inflation during Bier’s block is 20 minutes, while the maximum time is 45 minutes.
Further Reading:
Bier’s block is a regional intravenous anesthesia technique commonly used for minor surgical procedures of the forearm or for reducing distal radius fractures in the emergency department (ED). It is recommended by NICE as the preferred anesthesia block for adults requiring manipulation of distal forearm fractures in the ED.
Before performing the procedure, a pre-procedure checklist should be completed, including obtaining consent, recording the patient’s weight, ensuring the resuscitative equipment is available, and monitoring the patient’s vital signs throughout the procedure. The air cylinder should be checked if not using an electronic machine, and the cuff should be checked for leaks.
During the procedure, a double cuff tourniquet is placed on the upper arm, and the arm is elevated to exsanguinate the limb. The proximal cuff is inflated to a pressure 100 mmHg above the systolic blood pressure, up to a maximum of 300 mmHg. The time of inflation and pressure should be recorded, and the absence of the radial pulse should be confirmed. 0.5% plain prilocaine is then injected slowly, and the time of injection is recorded. The patient should be warned about the potential cold/hot sensation and mottled appearance of the arm. After injection, the cannula is removed and pressure is applied to the venipuncture site to prevent bleeding. After approximately 10 minutes, the patient should have anesthesia and should not feel pain during manipulation. If anesthesia is successful, the manipulation can be performed, and a plaster can be applied by a second staff member. A check x-ray should be obtained with the arm lowered onto a pillow. The tourniquet should be monitored at all times, and the cuff should be inflated for a minimum of 20 minutes and a maximum of 45 minutes. If rotation of the cuff is required, it should be done after the manipulation and plaster application. After the post-reduction x-ray is satisfactory, the cuff can be deflated while observing the patient and monitors. Limb circulation should be checked prior to discharge, and appropriate follow-up and analgesia should be arranged.
There are several contraindications to performing Bier’s block, including allergy to local anesthetic, hypertension over 200 mm Hg, infection in the limb, lymphedema, methemoglobinemia, morbid obesity, peripheral vascular disease, procedures needed in both arms, Raynaud’s phenomenon, scleroderma, severe hypertension and sickle cell disease.
-
This question is part of the following fields:
- Basic Anaesthetics
-
-
Question 15
Incorrect
-
You are preparing to conduct rapid sequence induction. What clinical observation, typically seen after administering suxamethonium, is not present when rocuronium is used for neuromuscular blockade?
Your Answer:
Correct Answer: Muscle fasciculations
Explanation:When suxamethonium is administered for neuromuscular blockade during rapid sequence induction, one of the clinical observations typically seen is muscle fasciculations. However, when rocuronium is used instead, muscle fasciculations are not present.
Further Reading:
Rapid sequence induction (RSI) is a method used to place an endotracheal tube (ETT) in the trachea while minimizing the risk of aspiration. It involves inducing loss of consciousness while applying cricoid pressure, followed by intubation without face mask ventilation. The steps of RSI can be remembered using the 7 P’s: preparation, pre-oxygenation, pre-treatment, paralysis and induction, protection and positioning, placement with proof, and post-intubation management.
Preparation involves preparing the patient, equipment, team, and anticipating any difficulties that may arise during the procedure. Pre-oxygenation is important to ensure the patient has an adequate oxygen reserve and prolongs the time before desaturation. This is typically done by breathing 100% oxygen for 3 minutes. Pre-treatment involves administering drugs to counter expected side effects of the procedure and anesthesia agents used.
Paralysis and induction involve administering a rapid-acting induction agent followed by a neuromuscular blocking agent. Commonly used induction agents include propofol, ketamine, thiopentone, and etomidate. The neuromuscular blocking agents can be depolarizing (such as suxamethonium) or non-depolarizing (such as rocuronium). Depolarizing agents bind to acetylcholine receptors and generate an action potential, while non-depolarizing agents act as competitive antagonists.
Protection and positioning involve applying cricoid pressure to prevent regurgitation of gastric contents and positioning the patient’s neck appropriately. Tube placement is confirmed by visualizing the tube passing between the vocal cords, auscultation of the chest and stomach, end-tidal CO2 measurement, and visualizing misting of the tube. Post-intubation management includes standard care such as monitoring ECG, SpO2, NIBP, capnography, and maintaining sedation and neuromuscular blockade.
Overall, RSI is a technique used to quickly and safely secure the airway in patients who may be at risk of aspiration. It involves a series of steps to ensure proper preparation, oxygenation, drug administration, and tube placement. Monitoring and post-intubation care are also important aspects of RSI.
-
This question is part of the following fields:
- Basic Anaesthetics
-
-
Question 16
Incorrect
-
A 52 year old male is brought into the emergency room after an accident at a construction site resulting in a severe blunt abdominal injury. The patient is experiencing hypotension. The surgical team is preparing for immediate transfer to the operating room. The consultant requests you to prepare intravenous ketamine for rapid sequence induction. What would be the appropriate initial dose of IV ketamine for this patient?
Your Answer:
Correct Answer: 1.5 mg/kg IV
Explanation:The recommended dose of ketamine for rapid sequence intubation (RSI) is typically 1.5 mg/kg administered intravenously. This dosage is commonly used in UK medical centers. According to the British National Formulary (BNF), intravenous induction doses of ketamine range from 0.5 to 2 mg/kg for longer procedures and 1 to 4.5 mg/kg for shorter procedures. Ketamine is known to cause an increase in blood pressure, making it a suitable option for individuals with hemodynamic compromise.
Further Reading:
There are four commonly used induction agents in the UK: propofol, ketamine, thiopentone, and etomidate.
Propofol is a 1% solution that produces significant venodilation and myocardial depression. It can also reduce cerebral perfusion pressure. The typical dose for propofol is 1.5-2.5 mg/kg. However, it can cause side effects such as hypotension, respiratory depression, and pain at the site of injection.
Ketamine is another induction agent that produces a dissociative state. It does not display a dose-response continuum, meaning that the effects do not necessarily increase with higher doses. Ketamine can cause bronchodilation, which is useful in patients with asthma. The initial dose for ketamine is 0.5-2 mg/kg, with a typical IV dose of 1.5 mg/kg. Side effects of ketamine include tachycardia, hypertension, laryngospasm, unpleasant hallucinations, nausea and vomiting, hypersalivation, increased intracranial and intraocular pressure, nystagmus and diplopia, abnormal movements, and skin reactions.
Thiopentone is an ultra-short acting barbiturate that acts on the GABA receptor complex. It decreases cerebral metabolic oxygen and reduces cerebral blood flow and intracranial pressure. The adult dose for thiopentone is 3-5 mg/kg, while the child dose is 5-8 mg/kg. However, these doses should be halved in patients with hypovolemia. Side effects of thiopentone include venodilation, myocardial depression, and hypotension. It is contraindicated in patients with acute porphyrias and myotonic dystrophy.
Etomidate is the most haemodynamically stable induction agent and is useful in patients with hypovolemia, anaphylaxis, and asthma. It has similar cerebral effects to thiopentone. The dose for etomidate is 0.15-0.3 mg/kg. Side effects of etomidate include injection site pain, movement disorders, adrenal insufficiency, and apnoea. It is contraindicated in patients with sepsis due to adrenal suppression.
-
This question is part of the following fields:
- Basic Anaesthetics
-
-
Question 17
Incorrect
-
You are caring for a patient with a declining Glasgow Coma Scale (GCS) that you expect will need rapid sequence induction (RSI). You observe that the patient has a history of asthma. Which of the following induction medications is recognized for its bronchodilatory effects and would be appropriate for use in an asthmatic patient?
Your Answer:
Correct Answer: Ketamine
Explanation:When caring for a patient with a declining Glasgow Coma Scale (GCS) who may require rapid sequence induction (RSI), it is important to consider their medical history. In this case, the patient has a history of asthma. One of the induction medications that is recognized for its bronchodilatory effects and would be appropriate for use in an asthmatic patient is Ketamine.
Further Reading:
There are four commonly used induction agents in the UK: propofol, ketamine, thiopentone, and etomidate.
Propofol is a 1% solution that produces significant venodilation and myocardial depression. It can also reduce cerebral perfusion pressure. The typical dose for propofol is 1.5-2.5 mg/kg. However, it can cause side effects such as hypotension, respiratory depression, and pain at the site of injection.
Ketamine is another induction agent that produces a dissociative state. It does not display a dose-response continuum, meaning that the effects do not necessarily increase with higher doses. Ketamine can cause bronchodilation, which is useful in patients with asthma. The initial dose for ketamine is 0.5-2 mg/kg, with a typical IV dose of 1.5 mg/kg. Side effects of ketamine include tachycardia, hypertension, laryngospasm, unpleasant hallucinations, nausea and vomiting, hypersalivation, increased intracranial and intraocular pressure, nystagmus and diplopia, abnormal movements, and skin reactions.
Thiopentone is an ultra-short acting barbiturate that acts on the GABA receptor complex. It decreases cerebral metabolic oxygen and reduces cerebral blood flow and intracranial pressure. The adult dose for thiopentone is 3-5 mg/kg, while the child dose is 5-8 mg/kg. However, these doses should be halved in patients with hypovolemia. Side effects of thiopentone include venodilation, myocardial depression, and hypotension. It is contraindicated in patients with acute porphyrias and myotonic dystrophy.
Etomidate is the most haemodynamically stable induction agent and is useful in patients with hypovolemia, anaphylaxis, and asthma. It has similar cerebral effects to thiopentone. The dose for etomidate is 0.15-0.3 mg/kg. Side effects of etomidate include injection site pain, movement disorders, adrenal insufficiency, and apnoea. It is contraindicated in patients with sepsis due to adrenal suppression.
-
This question is part of the following fields:
- Basic Anaesthetics
-
-
Question 18
Incorrect
-
You have recently conducted rapid sequence induction utilizing ketamine and rocuronium and successfully inserted an endotracheal tube under the guidance of a consultant. What should have been the available reversal agent to counteract the effects of Rocuronium if necessary?
Your Answer:
Correct Answer: Sugammadex
Explanation:Sugammadex is a medication used to quickly reverse the effects of muscle relaxation caused by drugs like rocuronium bromide or vecuronium bromide. The 2020 guidelines for sedation and anesthesia outside of the operating room recommend having a complete set of emergency drugs, including specific reversal agents like naloxone, sugammadex, and flumazenil, readily accessible. Sugammadex is a modified form of gamma cyclodextrin that is effective in rapidly reversing the neuromuscular blockade caused by these specific drugs.
Further Reading:
Rapid sequence induction (RSI) is a method used to place an endotracheal tube (ETT) in the trachea while minimizing the risk of aspiration. It involves inducing loss of consciousness while applying cricoid pressure, followed by intubation without face mask ventilation. The steps of RSI can be remembered using the 7 P’s: preparation, pre-oxygenation, pre-treatment, paralysis and induction, protection and positioning, placement with proof, and post-intubation management.
Preparation involves preparing the patient, equipment, team, and anticipating any difficulties that may arise during the procedure. Pre-oxygenation is important to ensure the patient has an adequate oxygen reserve and prolongs the time before desaturation. This is typically done by breathing 100% oxygen for 3 minutes. Pre-treatment involves administering drugs to counter expected side effects of the procedure and anesthesia agents used.
Paralysis and induction involve administering a rapid-acting induction agent followed by a neuromuscular blocking agent. Commonly used induction agents include propofol, ketamine, thiopentone, and etomidate. The neuromuscular blocking agents can be depolarizing (such as suxamethonium) or non-depolarizing (such as rocuronium). Depolarizing agents bind to acetylcholine receptors and generate an action potential, while non-depolarizing agents act as competitive antagonists.
Protection and positioning involve applying cricoid pressure to prevent regurgitation of gastric contents and positioning the patient’s neck appropriately. Tube placement is confirmed by visualizing the tube passing between the vocal cords, auscultation of the chest and stomach, end-tidal CO2 measurement, and visualizing misting of the tube. Post-intubation management includes standard care such as monitoring ECG, SpO2, NIBP, capnography, and maintaining sedation and neuromuscular blockade.
Overall, RSI is a technique used to quickly and safely secure the airway in patients who may be at risk of aspiration. It involves a series of steps to ensure proper preparation, oxygenation, drug administration, and tube placement. Monitoring and post-intubation care are also important aspects of RSI.
-
This question is part of the following fields:
- Basic Anaesthetics
-
-
Question 19
Incorrect
-
You are summoned to aid a 67-year-old patient who is in resus and has experienced two defibrillation attempts for cardiac arrest. Unfortunately, there is no supply of amiodarone available, so your consultant requests you to prepare lidocaine for administration following the next shock. What is the mechanism of action of lidocaine in the context of cardiac arrest?
Your Answer:
Correct Answer: Blockade of sodium channels
Explanation:Lidocaine functions by inhibiting the activity of voltage-gated sodium channels, preventing the flow of sodium ions through these channels.
Further Reading:
In the management of respiratory and cardiac arrest, several drugs are commonly used to help restore normal function and improve outcomes. Adrenaline is a non-selective agonist of adrenergic receptors and is administered intravenously at a dose of 1 mg every 3-5 minutes. It works by causing vasoconstriction, increasing systemic vascular resistance (SVR), and improving cardiac output by increasing the force of heart contraction. Adrenaline also has bronchodilatory effects.
Amiodarone is another drug used in cardiac arrest situations. It blocks voltage-gated potassium channels, which prolongs repolarization and reduces myocardial excitability. The initial dose of amiodarone is 300 mg intravenously after 3 shocks, followed by a dose of 150 mg after 5 shocks.
Lidocaine is an alternative to amiodarone in cardiac arrest situations. It works by blocking sodium channels and decreasing heart rate. The recommended dose is 1 mg/kg by slow intravenous injection, with a repeat half of the initial dose after 5 minutes. The maximum total dose of lidocaine is 3 mg/kg.
Magnesium sulfate is used to reverse myocardial hyperexcitability associated with hypomagnesemia. It is administered intravenously at a dose of 2 g over 10-15 minutes. An additional dose may be given if necessary, but the maximum total dose should not exceed 3 g.
Atropine is an antagonist of muscarinic acetylcholine receptors and is used to counteract the slowing of heart rate caused by the parasympathetic nervous system. It is administered intravenously at a dose of 500 mcg every 3-5 minutes, with a maximum dose of 3 mg.
Naloxone is a competitive antagonist for opioid receptors and is used in cases of respiratory arrest caused by opioid overdose. It has a short duration of action, so careful monitoring is necessary. The initial dose of naloxone is 400 micrograms, followed by 800 mcg after 1 minute. The dose can be gradually escalated up to 2 mg per dose if there is no response to the preceding dose.
It is important for healthcare professionals to have knowledge of the pharmacology and dosing schedules of these drugs in order to effectively manage respiratory and cardiac arrest situations.
-
This question is part of the following fields:
- Basic Anaesthetics
-
-
Question 20
Incorrect
-
You examine the X-ray of a 65 year old male who has tripped and landed on his extended right hand. The X-ray confirms a fracture of the distal radius with dorsal displacement. You intend to perform a reduction of the fracture using intravenous regional anesthesia (Bier's block). How many healthcare professionals should be present during the entire procedure?
Your Answer:
Correct Answer: 2
Explanation:Bier’s block is a regional intravenous anesthesia technique commonly used for minor surgical procedures of the forearm or for reducing distal radius fractures in the emergency department (ED). It is recommended by NICE as the preferred anesthesia block for adults requiring manipulation of distal forearm fractures in the ED.
Before performing the procedure, a pre-procedure checklist should be completed, including obtaining consent, recording the patient’s weight, ensuring the resuscitative equipment is available, and monitoring the patient’s vital signs throughout the procedure. The air cylinder should be checked if not using an electronic machine, and the cuff should be checked for leaks.
During the procedure, a double cuff tourniquet is placed on the upper arm, and the arm is elevated to exsanguinate the limb. The proximal cuff is inflated to a pressure 100 mmHg above the systolic blood pressure, up to a maximum of 300 mmHg. The time of inflation and pressure should be recorded, and the absence of the radial pulse should be confirmed. 0.5% plain prilocaine is then injected slowly, and the time of injection is recorded. The patient should be warned about the potential cold/hot sensation and mottled appearance of the arm. After injection, the cannula is removed and pressure is applied to the venipuncture site to prevent bleeding. After approximately 10 minutes, the patient should have anesthesia and should not feel pain during manipulation. If anesthesia is successful, the manipulation can be performed, and a plaster can be applied by a second staff member. A check x-ray should be obtained with the arm lowered onto a pillow. The tourniquet should be monitored at all times, and the cuff should be inflated for a minimum of 20 minutes and a maximum of 45 minutes. If rotation of the cuff is required, it should be done after the manipulation and plaster application. After the post-reduction x-ray is satisfactory, the cuff can be deflated while observing the patient and monitors. Limb circulation should be checked prior to discharge, and appropriate follow-up and analgesia should be arranged.
There are several contraindications to performing Bier’s block, including allergy to local anesthetic, hypertension over 200 mm Hg, infection in the limb, lymphedema, methemoglobinemia, morbid obesity, peripheral vascular disease, procedures needed in both arms, Raynaud’s phenomenon, scleroderma, severe hypertension and sickle cell disease.
-
This question is part of the following fields:
- Basic Anaesthetics
-
-
Question 21
Incorrect
-
You are part of the team managing a pediatric trauma patient in the resuscitation room. You are assisting the attending physician who is performing rapid sequence induction. The attending physician asks you to apply cricoid pressure. What is the recommended amount of pressure that should be applied to the cricoid?
Your Answer:
Correct Answer: 30-40 Newtons
Explanation:To prevent the aspiration of gastric contents, it is recommended to apply a force of 30-40 Newtons to the cricoid cartilage during cricoid pressure.
Further Reading:
Rapid sequence induction (RSI) is a method used to place an endotracheal tube (ETT) in the trachea while minimizing the risk of aspiration. It involves inducing loss of consciousness while applying cricoid pressure, followed by intubation without face mask ventilation. The steps of RSI can be remembered using the 7 P’s: preparation, pre-oxygenation, pre-treatment, paralysis and induction, protection and positioning, placement with proof, and post-intubation management.
Preparation involves preparing the patient, equipment, team, and anticipating any difficulties that may arise during the procedure. Pre-oxygenation is important to ensure the patient has an adequate oxygen reserve and prolongs the time before desaturation. This is typically done by breathing 100% oxygen for 3 minutes. Pre-treatment involves administering drugs to counter expected side effects of the procedure and anesthesia agents used.
Paralysis and induction involve administering a rapid-acting induction agent followed by a neuromuscular blocking agent. Commonly used induction agents include propofol, ketamine, thiopentone, and etomidate. The neuromuscular blocking agents can be depolarizing (such as suxamethonium) or non-depolarizing (such as rocuronium). Depolarizing agents bind to acetylcholine receptors and generate an action potential, while non-depolarizing agents act as competitive antagonists.
Protection and positioning involve applying cricoid pressure to prevent regurgitation of gastric contents and positioning the patient’s neck appropriately. Tube placement is confirmed by visualizing the tube passing between the vocal cords, auscultation of the chest and stomach, end-tidal CO2 measurement, and visualizing misting of the tube. Post-intubation management includes standard care such as monitoring ECG, SpO2, NIBP, capnography, and maintaining sedation and neuromuscular blockade.
Overall, RSI is a technique used to quickly and safely secure the airway in patients who may be at risk of aspiration. It involves a series of steps to ensure proper preparation, oxygenation, drug administration, and tube placement. Monitoring and post-intubation care are also important aspects of RSI.
-
This question is part of the following fields:
- Basic Anaesthetics
-
-
Question 22
Incorrect
-
A 42 year old male patient is brought into the emergency department due to a recent onset of high fever and feeling unwell that has worsened over the past day, with the patient becoming increasingly drowsy. Despite initial resuscitation efforts, there is minimal response and it is decided to intubate the patient before transferring to the intensive care unit for ventilatory and inotropic support. Your consultant requests that you apply pressure over the cricoid during the procedure. What is the reason for this?
Your Answer:
Correct Answer: Prevent aspiration of gastric contents
Explanation:Cricoid pressure is applied during intubation to compress the oesophagus and prevent the backflow of stomach contents, reducing the risk of aspiration.
Further Reading:
Rapid sequence induction (RSI) is a method used to place an endotracheal tube (ETT) in the trachea while minimizing the risk of aspiration. It involves inducing loss of consciousness while applying cricoid pressure, followed by intubation without face mask ventilation. The steps of RSI can be remembered using the 7 P’s: preparation, pre-oxygenation, pre-treatment, paralysis and induction, protection and positioning, placement with proof, and post-intubation management.
Preparation involves preparing the patient, equipment, team, and anticipating any difficulties that may arise during the procedure. Pre-oxygenation is important to ensure the patient has an adequate oxygen reserve and prolongs the time before desaturation. This is typically done by breathing 100% oxygen for 3 minutes. Pre-treatment involves administering drugs to counter expected side effects of the procedure and anesthesia agents used.
Paralysis and induction involve administering a rapid-acting induction agent followed by a neuromuscular blocking agent. Commonly used induction agents include propofol, ketamine, thiopentone, and etomidate. The neuromuscular blocking agents can be depolarizing (such as suxamethonium) or non-depolarizing (such as rocuronium). Depolarizing agents bind to acetylcholine receptors and generate an action potential, while non-depolarizing agents act as competitive antagonists.
Protection and positioning involve applying cricoid pressure to prevent regurgitation of gastric contents and positioning the patient’s neck appropriately. Tube placement is confirmed by visualizing the tube passing between the vocal cords, auscultation of the chest and stomach, end-tidal CO2 measurement, and visualizing misting of the tube. Post-intubation management includes standard care such as monitoring ECG, SpO2, NIBP, capnography, and maintaining sedation and neuromuscular blockade.
Overall, RSI is a technique used to quickly and safely secure the airway in patients who may be at risk of aspiration. It involves a series of steps to ensure proper preparation, oxygenation, drug administration, and tube placement. Monitoring and post-intubation care are also important aspects of RSI.
-
This question is part of the following fields:
- Basic Anaesthetics
-
-
Question 23
Incorrect
-
You are part of the team managing a conscious patient in the emergency room. You decide to insert a nasopharyngeal airway adjunct. How should you determine the appropriate size of the nasopharyngeal airway?
Your Answer:
Correct Answer: Sized according to the distance between the nostril and the tragus of the ear
Explanation:Nasopharyngeal airway adjuncts (NPAs) are selected based on their length, which should match the distance between the nostril and the tragus of the ear.
Further Reading:
Techniques to keep the airway open:
1. Suction: Used to remove obstructing material such as blood, vomit, secretions, and food debris from the oral cavity.
2. Chin lift manoeuvres: Involves lifting the head off the floor and lifting the chin to extend the head in relation to the neck. Improves alignment of the pharyngeal, laryngeal, and oral axes.
3. Jaw thrust: Used in trauma patients with cervical spine injury concerns. Fingers are placed under the mandible and gently pushed upward.
Airway adjuncts:
1. Oropharyngeal airway (OPA): Prevents the tongue from occluding the airway. Sized according to the patient by measuring from the incisor teeth to the angle of the mandible. Inserted with the tip facing backwards and rotated 180 degrees once it touches the back of the palate or oropharynx.
2. Nasopharyngeal airway (NPA): Useful when it is difficult to open the mouth or in semi-conscious patients. Sized by length (distance between nostril and tragus of the ear) and diameter (roughly that of the patient’s little finger). Contraindicated in basal skull and midface fractures.
Laryngeal mask airway (LMA):
– Supraglottic airway device used as a first line or rescue airway.
– Easy to insert, sized according to patient’s bodyweight.
– Advantages: Easy insertion, effective ventilation, some protection from aspiration.
– Disadvantages: Risk of hypoventilation, greater gastric inflation than endotracheal tube (ETT), risk of aspiration and laryngospasm.Note: Proper training and assessment of the patient’s condition are essential for airway management.
-
This question is part of the following fields:
- Basic Anaesthetics
-
-
Question 24
Incorrect
-
A 32-year-old man that has been involved in a car crash develops symptoms of acute airway blockage. You conclude that he needs to be intubated using a rapid sequence induction. You intend to use thiopental sodium as your induction medication.
What type of receptor does thiopental sodium act on to produce its effects?Your Answer:
Correct Answer: Gamma-aminobutyric acid (GABA)
Explanation:Thiopental sodium is a barbiturate with a very short duration of action. It is primarily used to induce anesthesia. Barbiturates are believed to primarily affect synapses by reducing the sensitivity of postsynaptic receptors to neurotransmitters and by interfering with the release of neurotransmitters from presynaptic neurons.
Thiopental sodium specifically binds to a unique site associated with a chloride ionophore at the GABAA receptor, which is responsible for the opening of chloride ion channels. This binding increases the length of time that the chloride ionophore remains open. As a result, the inhibitory effect of GABA on postsynaptic neurons in the thalamus is prolonged.
In summary, thiopental sodium acts as a short-acting barbiturate that is commonly used to induce anesthesia. It affects synapses by reducing postsynaptic receptor sensitivity and interfering with neurotransmitter release. By binding to a specific site at the GABAA receptor, thiopental sodium prolongs the inhibitory effect of GABA in the thalamus.
-
This question is part of the following fields:
- Basic Anaesthetics
-
-
Question 25
Incorrect
-
You are a member of the team assisting with the intubation of a pediatric patient. The initial intubation attempt is unsuccessful. Your attending physician instructs you to apply pressure on the larynx during the second attempt. With the patient positioned in a semi-recumbent position, which direction should pressure be applied to aid in intubation?
Your Answer:
Correct Answer: Backwards, upwards and rightwards
Explanation:The BURP maneuver is a technique used to assist with intubation. It involves applying pressure in a specific direction on the larynx. The acronym BURP stands for backwards (B), upwards (U), rightwards (R), and pressure (P). To perform the maneuver correctly, the thyroid cartilage is moved backwards, 2 cm upwards, and 0.5cm – 2 cm to the right in relation to the anatomical position.
Further Reading:
A difficult airway refers to a situation where factors have been identified that make airway management more challenging. These factors can include body habitus, head and neck anatomy, mouth characteristics, jaw abnormalities, and neck mobility. The LEMON criteria can be used to predict difficult intubation by assessing these factors. The criteria include looking externally at these factors, evaluating the 3-3-2 rule which assesses the space in the mouth and neck, assessing the Mallampati score which measures the distance between the tongue base and roof of the mouth, and considering any upper airway obstructions or reduced neck mobility.
Direct laryngoscopy is a method used to visualize the larynx and assess the size of the tracheal opening. The Cormack-Lehane grading system can be used to classify the tracheal opening, with higher grades indicating more difficult access. In cases of a failed airway, where intubation attempts are unsuccessful and oxygenation cannot be maintained, the immediate priority is to oxygenate the patient and prevent hypoxic brain injury. This can be done through various measures such as using a bag-valve-mask ventilation, high flow oxygen, suctioning, and optimizing head positioning.
If oxygenation cannot be maintained, it is important to call for help from senior medical professionals and obtain a difficult airway trolley if not already available. If basic airway management techniques do not improve oxygenation, further intubation attempts may be considered using different equipment or techniques. If oxygen saturations remain below 90%, a surgical airway such as a cricothyroidotomy may be necessary.
Post-intubation hypoxia can occur for various reasons, and the mnemonic DOPES can be used to identify and address potential problems. DOPES stands for displacement of the endotracheal tube, obstruction, pneumothorax, equipment failure, and stacked breaths. If intubation attempts fail, a maximum of three attempts should be made before moving to an alternative plan, such as using a laryngeal mask airway or considering a cricothyroidotomy.
-
This question is part of the following fields:
- Basic Anaesthetics
-
-
Question 26
Incorrect
-
You have been requested to arrange a teaching session on regional anesthesia for the recently inducted foundation doctors. Your task is to educate them about the application of Bier's block. What is the shortest duration for tourniquet placement during a Bier's block procedure?
Your Answer:
Correct Answer: 20 minutes
Explanation:The minimum cuff inflation time for Bier’s block is set at 20 minutes, while the maximum time is 45 minutes. Similarly, the minimum tourniquet time is also 20 minutes, with a maximum of 45 minutes. The purpose of the minimum tourniquet time is to allow enough time for the local anaesthetic to bind to the local tissue and prevent it from being absorbed into the bloodstream. This helps reduce the risk of systemic toxicity from the anaesthetic. After 20 minutes, the chances of experiencing this toxicity should be significantly reduced. On the other hand, the maximum tourniquet time is set at 45 minutes to minimize the risk of complications such as distal ischaemia, nerve compression, and compartment syndrome.
Further Reading:
Bier’s block is a regional intravenous anesthesia technique commonly used for minor surgical procedures of the forearm or for reducing distal radius fractures in the emergency department (ED). It is recommended by NICE as the preferred anesthesia block for adults requiring manipulation of distal forearm fractures in the ED.
Before performing the procedure, a pre-procedure checklist should be completed, including obtaining consent, recording the patient’s weight, ensuring the resuscitative equipment is available, and monitoring the patient’s vital signs throughout the procedure. The air cylinder should be checked if not using an electronic machine, and the cuff should be checked for leaks.
During the procedure, a double cuff tourniquet is placed on the upper arm, and the arm is elevated to exsanguinate the limb. The proximal cuff is inflated to a pressure 100 mmHg above the systolic blood pressure, up to a maximum of 300 mmHg. The time of inflation and pressure should be recorded, and the absence of the radial pulse should be confirmed. 0.5% plain prilocaine is then injected slowly, and the time of injection is recorded. The patient should be warned about the potential cold/hot sensation and mottled appearance of the arm. After injection, the cannula is removed and pressure is applied to the venipuncture site to prevent bleeding. After approximately 10 minutes, the patient should have anesthesia and should not feel pain during manipulation. If anesthesia is successful, the manipulation can be performed, and a plaster can be applied by a second staff member. A check x-ray should be obtained with the arm lowered onto a pillow. The tourniquet should be monitored at all times, and the cuff should be inflated for a minimum of 20 minutes and a maximum of 45 minutes. If rotation of the cuff is required, it should be done after the manipulation and plaster application. After the post-reduction x-ray is satisfactory, the cuff can be deflated while observing the patient and monitors. Limb circulation should be checked prior to discharge, and appropriate follow-up and analgesia should be arranged.
There are several contraindications to performing Bier’s block, including allergy to local anesthetic, hypertension over 200 mm Hg, infection in the limb, lymphedema, methemoglobinemia, morbid obesity, peripheral vascular disease, procedures needed in both arms, Raynaud’s phenomenon, scleroderma, severe hypertension and sickle cell disease.
-
This question is part of the following fields:
- Basic Anaesthetics
-
-
Question 27
Incorrect
-
A 55 year old female patient is brought into the emergency department with urosepsis. It is decided to intubate her pending transfer to ITU. Your consultant requests you prepare propofol and suxamethonium for rapid sequence intubation (RSI). What is the recommended dose of suxamethonium for RSI in adults?
Your Answer:
Correct Answer: 1.5 mg/kg
Explanation:The appropriate dosage of suxamethonium for rapid sequence intubation (RSI) in adults is between 1 and 1.5 milligrams per kilogram of body weight.
Further Reading:
Rapid sequence induction (RSI) is a method used to place an endotracheal tube (ETT) in the trachea while minimizing the risk of aspiration. It involves inducing loss of consciousness while applying cricoid pressure, followed by intubation without face mask ventilation. The steps of RSI can be remembered using the 7 P’s: preparation, pre-oxygenation, pre-treatment, paralysis and induction, protection and positioning, placement with proof, and post-intubation management.
Preparation involves preparing the patient, equipment, team, and anticipating any difficulties that may arise during the procedure. Pre-oxygenation is important to ensure the patient has an adequate oxygen reserve and prolongs the time before desaturation. This is typically done by breathing 100% oxygen for 3 minutes. Pre-treatment involves administering drugs to counter expected side effects of the procedure and anesthesia agents used.
Paralysis and induction involve administering a rapid-acting induction agent followed by a neuromuscular blocking agent. Commonly used induction agents include propofol, ketamine, thiopentone, and etomidate. The neuromuscular blocking agents can be depolarizing (such as suxamethonium) or non-depolarizing (such as rocuronium). Depolarizing agents bind to acetylcholine receptors and generate an action potential, while non-depolarizing agents act as competitive antagonists.
Protection and positioning involve applying cricoid pressure to prevent regurgitation of gastric contents and positioning the patient’s neck appropriately. Tube placement is confirmed by visualizing the tube passing between the vocal cords, auscultation of the chest and stomach, end-tidal CO2 measurement, and visualizing misting of the tube. Post-intubation management includes standard care such as monitoring ECG, SpO2, NIBP, capnography, and maintaining sedation and neuromuscular blockade.
Overall, RSI is a technique used to quickly and safely secure the airway in patients who may be at risk of aspiration. It involves a series of steps to ensure proper preparation, oxygenation, drug administration, and tube placement. Monitoring and post-intubation care are also important aspects of RSI.
-
This question is part of the following fields:
- Basic Anaesthetics
-
-
Question 28
Incorrect
-
You are part of the team managing a pediatric patient, your consultant asks you what the patient's Mallampati score is. What criteria is utilized to assess the Mallampati score?
Your Answer:
Correct Answer: The distance between the tongue base and the roof of the mouth
Explanation:The Mallampati score is a measure that assesses the distance between the base of the tongue and the roof of the mouth. This score is used to classify the level of airway obstruction during certain medical procedures. Please refer to the notes below for the complete classification.
Further Reading:
A difficult airway refers to a situation where factors have been identified that make airway management more challenging. These factors can include body habitus, head and neck anatomy, mouth characteristics, jaw abnormalities, and neck mobility. The LEMON criteria can be used to predict difficult intubation by assessing these factors. The criteria include looking externally at these factors, evaluating the 3-3-2 rule which assesses the space in the mouth and neck, assessing the Mallampati score which measures the distance between the tongue base and roof of the mouth, and considering any upper airway obstructions or reduced neck mobility.
Direct laryngoscopy is a method used to visualize the larynx and assess the size of the tracheal opening. The Cormack-Lehane grading system can be used to classify the tracheal opening, with higher grades indicating more difficult access. In cases of a failed airway, where intubation attempts are unsuccessful and oxygenation cannot be maintained, the immediate priority is to oxygenate the patient and prevent hypoxic brain injury. This can be done through various measures such as using a bag-valve-mask ventilation, high flow oxygen, suctioning, and optimizing head positioning.
If oxygenation cannot be maintained, it is important to call for help from senior medical professionals and obtain a difficult airway trolley if not already available. If basic airway management techniques do not improve oxygenation, further intubation attempts may be considered using different equipment or techniques. If oxygen saturations remain below 90%, a surgical airway such as a cricothyroidotomy may be necessary.
Post-intubation hypoxia can occur for various reasons, and the mnemonic DOPES can be used to identify and address potential problems. DOPES stands for displacement of the endotracheal tube, obstruction, pneumothorax, equipment failure, and stacked breaths. If intubation attempts fail, a maximum of three attempts should be made before moving to an alternative plan, such as using a laryngeal mask airway or considering a cricothyroidotomy.
-
This question is part of the following fields:
- Basic Anaesthetics
-
-
Question 29
Incorrect
-
You are part of the team managing a 60 year old patient who has experienced cardiac arrest. What is the appropriate dosage of adrenaline to administer to this patient?
Your Answer:
Correct Answer: 1 mg IV
Explanation:In cases of cardiac arrest, it is recommended to administer 1 mg of adrenaline intravenously (IV) every 3-5 minutes. According to the 2021 resus council guidelines for adult advanced life support (ALS), the administration of vasopressors should follow these guidelines:
– For adult patients in cardiac arrest with a non-shockable rhythm, administer 1 mg of adrenaline IV (or intraosseous) as soon as possible.
– For adult patients in cardiac arrest with a shockable rhythm, administer 1 mg of adrenaline IV (or intraosseous) after the third shock.
– Continuously repeat the administration of 1 mg of adrenaline IV (or intraosseous) every 3-5 minutes throughout the ALS procedure.Further Reading:
In the management of respiratory and cardiac arrest, several drugs are commonly used to help restore normal function and improve outcomes. Adrenaline is a non-selective agonist of adrenergic receptors and is administered intravenously at a dose of 1 mg every 3-5 minutes. It works by causing vasoconstriction, increasing systemic vascular resistance (SVR), and improving cardiac output by increasing the force of heart contraction. Adrenaline also has bronchodilatory effects.
Amiodarone is another drug used in cardiac arrest situations. It blocks voltage-gated potassium channels, which prolongs repolarization and reduces myocardial excitability. The initial dose of amiodarone is 300 mg intravenously after 3 shocks, followed by a dose of 150 mg after 5 shocks.
Lidocaine is an alternative to amiodarone in cardiac arrest situations. It works by blocking sodium channels and decreasing heart rate. The recommended dose is 1 mg/kg by slow intravenous injection, with a repeat half of the initial dose after 5 minutes. The maximum total dose of lidocaine is 3 mg/kg.
Magnesium sulfate is used to reverse myocardial hyperexcitability associated with hypomagnesemia. It is administered intravenously at a dose of 2 g over 10-15 minutes. An additional dose may be given if necessary, but the maximum total dose should not exceed 3 g.
Atropine is an antagonist of muscarinic acetylcholine receptors and is used to counteract the slowing of heart rate caused by the parasympathetic nervous system. It is administered intravenously at a dose of 500 mcg every 3-5 minutes, with a maximum dose of 3 mg.
Naloxone is a competitive antagonist for opioid receptors and is used in cases of respiratory arrest caused by opioid overdose. It has a short duration of action, so careful monitoring is necessary. The initial dose of naloxone is 400 micrograms, followed by 800 mcg after 1 minute. The dose can be gradually escalated up to 2 mg per dose if there is no response to the preceding dose.
It is important for healthcare professionals to have knowledge of the pharmacology and dosing schedules of these drugs in order to effectively manage respiratory and cardiac arrest situations.
-
This question is part of the following fields:
- Basic Anaesthetics
-
-
Question 30
Incorrect
-
A 65 year old female patient has been brought into the department after being hit by a car in a vehicle-pedestrian accident. The patient needs CT imaging to evaluate the complete scope of her injuries. What are the minimum monitoring requirements for transferring a critically ill patient?
Your Answer:
Correct Answer: ECG, oxygen saturations, blood pressure and temperature monitoring
Explanation:It is crucial to continuously monitor the oxygen saturation, blood pressure, ECG, and temperature of critically ill patients during transfers. If the patient is intubated, monitoring of end-tidal CO2 is also necessary. The minimum standard monitoring requirements for any critically ill patient during transfers include ECG, oxygen saturation, blood pressure, and temperature. Additionally, if the patient is intubated, monitoring of end-tidal CO2 is mandatory. It is important to note that the guidance from ICS/FICM suggests that monitoring protocols for intra-hospital transfers should be similar to those for interhospital transfers.
Further Reading:
Transfer of critically ill patients in the emergency department is a common occurrence and can involve intra-hospital transfers or transfers to another hospital. However, there are several risks associated with these transfers that doctors need to be aware of and manage effectively.
Technical risks include equipment failure or inadequate equipment, unreliable power or oxygen supply, incompatible equipment, restricted positioning, and restricted monitoring equipment. These technical issues can hinder the ability to detect and treat problems with ventilation, blood pressure control, and arrhythmias during the transfer.
Non-technical risks involve limited personal and medical team during the transfer, isolation and lack of resources in the receiving hospital, and problems with communication and liaison between the origin and destination sites.
Organizational risks can be mitigated by having a dedicated consultant lead for transfers who is responsible for producing guidelines, training staff, standardizing protocols, equipment, and documentation, as well as capturing data and conducting audits.
To optimize the patient’s clinical condition before transfer, several key steps should be taken. These include ensuring a low threshold for intubation and anticipating airway and ventilation problems, securing the endotracheal tube (ETT) and verifying its position, calculating oxygen requirements and ensuring an adequate supply, monitoring for circulatory issues and inserting at least two IV accesses, providing ongoing analgesia and sedation, controlling seizures, and addressing any fractures or temperature changes.
It is also important to have the necessary equipment and personnel for the transfer. Standard monitoring equipment should include ECG, oxygen saturation, blood pressure, temperature, and capnographic monitoring for ventilated patients. Additional monitoring may be required depending on the level of care needed by the patient.
In terms of oxygen supply, it is standard practice to calculate the expected oxygen consumption during transfer and multiply it by two to ensure an additional supply in case of delays. The suggested oxygen supply for transfer can be calculated using the minute volume, fraction of inspired oxygen, and estimated transfer time.
Overall, managing the risks associated with patient transfers requires careful planning, communication, and coordination to ensure the safety and well-being of critically ill patients.
-
This question is part of the following fields:
- Basic Anaesthetics
-
00
Correct
00
Incorrect
00
:
00
:
00
Session Time
00
:
00
Average Question Time (
Secs)