Cricoid pressure is applied during intubation to compress the oesophagus and prevent the backflow of stomach contents, reducing the risk of aspiration.

Further Reading:

Rapid sequence induction (RSI) is a method used to place an endotracheal tube (ETT) in the trachea while minimizing the risk of aspiration. It involves inducing loss of consciousness while applying cricoid pressure, followed by intubation without face mask ventilation. The steps of RSI can be remembered using the 7 P’s: preparation, pre-oxygenation, pre-treatment, paralysis and induction, protection and positioning, placement with proof, and post-intubation management.

Preparation involves preparing the patient, equipment, team, and anticipating any difficulties that may arise during the procedure. Pre-oxygenation is important to ensure the patient has an adequate oxygen reserve and prolongs the time before desaturation. This is typically done by breathing 100% oxygen for 3 minutes. Pre-treatment involves administering drugs to counter expected side effects of the procedure and anesthesia agents used.

Paralysis and induction involve administering a rapid-acting induction agent followed by a neuromuscular blocking agent. Commonly used induction agents include propofol, ketamine, thiopentone, and etomidate. The neuromuscular blocking agents can be depolarizing (such as suxamethonium) or non-depolarizing (such as rocuronium). Depolarizing agents bind to acetylcholine receptors and generate an action potential, while non-depolarizing agents act as competitive antagonists.

Protection and positioning involve applying cricoid pressure to prevent regurgitation of gastric contents and positioning the patient’s neck appropriately. Tube placement is confirmed by visualizing the tube passing between the vocal cords, auscultation of the chest and stomach, end-tidal CO2 measurement, and visualizing misting of the tube. Post-intubation management includes standard care such as monitoring ECG, SpO2, NIBP, capnography, and maintaining sedation and neuromuscular blockade.

Overall, RSI is a technique used to quickly and safely secure the airway in patients who may be at risk of aspiration. It involves a series of steps to ensure proper preparation, oxygenation, drug administration, and tube placement. Monitoring and post-intubation care are also important aspects of RSI.

The use of a laryngeal mask airway (LMA) carries a higher risk of inducing laryngospasm compared to endotracheal intubation. However, LMAs are still considered excellent alternatives to bag masks as they reduce the risk of gastric inflation and aspiration. While they do decrease the risk of aspiration, they are not as protective as endotracheal tubes. Complications associated with LMA use include laryngospasm, nausea and vomiting, and a low risk of aspiration. LMAs have advantages over bag-mask ventilation, such as more effective ventilation, less gastric inflation, and a lower risk of aspiration. However, they also have disadvantages, including the risk of hypoventilation due to air leak around the cuff, greater gastric inflation compared to endotracheal intubation, and a very low risk of aspiration.

Further Reading:

Techniques to keep the airway open:

1. Suction: Used to remove obstructing material such as blood, vomit, secretions, and food debris from the oral cavity.

2. Chin lift manoeuvres: Involves lifting the head off the floor and lifting the chin to extend the head in relation to the neck. Improves alignment of the pharyngeal, laryngeal, and oral axes.

3. Jaw thrust: Used in trauma patients with cervical spine injury concerns. Fingers are placed under the mandible and gently pushed upward.

Airway adjuncts:

1. Oropharyngeal airway (OPA): Prevents the tongue from occluding the airway. Sized according to the patient by measuring from the incisor teeth to the angle of the mandible. Inserted with the tip facing backwards and rotated 180 degrees once it touches the back of the palate or oropharynx.

2. Nasopharyngeal airway (NPA): Useful when it is difficult to open the mouth or in semi-conscious patients. Sized by length (distance between nostril and tragus of the ear) and diameter (roughly that of the patient’s little finger). Contraindicated in basal skull and midface fractures.

Laryngeal mask airway (LMA):

– Supraglottic airway device used as a first line or rescue airway.
– Easy to insert, sized according to patient’s bodyweight.
– Advantages: Easy insertion, effective ventilation, some protection from aspiration.
– Disadvantages: Risk of hypoventilation, greater gastric inflation than endotracheal tube (ETT), risk of aspiration and laryngospasm.

Note: Proper training and assessment of the patient’s condition are essential for airway management.

Conscious sedation involves a patient who can respond purposefully to verbal commands. It is different from deeper levels of sedation where the patient may only respond to painful stimuli or not respond at all. In conscious sedation, the patient can usually maintain their own airway and does not need assistance with breathing or cardiovascular support.

Further Reading:

Procedural sedation is commonly used by emergency department (ED) doctors to minimize pain and discomfort during procedures that may be painful or distressing for patients. Effective procedural sedation requires the administration of analgesia, anxiolysis, sedation, and amnesia. This is typically achieved through the use of a combination of short-acting analgesics and sedatives.

There are different levels of sedation, ranging from minimal sedation (anxiolysis) to general anesthesia. It is important for clinicians to understand the level of sedation being used and to be able to manage any unintended deeper levels of sedation that may occur. Deeper levels of sedation are similar to general anesthesia and require the same level of care and monitoring.

Various drugs can be used for procedural sedation, including propofol, midazolam, ketamine, and fentanyl. Each of these drugs has its own mechanism of action and side effects. Propofol is commonly used for sedation, amnesia, and induction and maintenance of general anesthesia. Midazolam is a benzodiazepine that enhances the effect of GABA on the GABA A receptors. Ketamine is an NMDA receptor antagonist and is used for dissociative sedation. Fentanyl is a highly potent opioid used for analgesia and sedation.

The doses of these drugs for procedural sedation in the ED vary depending on the drug and the route of administration. It is important for clinicians to be familiar with the appropriate doses and onset and peak effect times for each drug.

Safe sedation requires certain requirements, including appropriate staffing levels, competencies of the sedating practitioner, location and facilities, and monitoring. The level of sedation being used determines the specific requirements for safe sedation.

After the procedure, patients should be monitored until they meet the criteria for safe discharge. This includes returning to their baseline level of consciousness, having vital signs within normal limits, and not experiencing compromised respiratory status. Pain and discomfort should also be addressed before discharge.

The four essential elements for effective procedural sedation are analgesia, anxiolysis, sedation, and amnesia. According to the Royal College of Emergency Medicine (RCEM), it is important to prioritize pain management before sedation, using appropriate analgesics based on the patient’s pain level. Non-pharmacological methods should be considered to reduce anxiety, such as creating a comfortable environment and involving supportive family members. The level of sedation required should be determined in advance, with most procedures in the emergency department requiring moderate to deep sedation. Lastly, providing a degree of amnesia will help minimize any unpleasant memories associated with the procedure.

Further Reading:

Procedural sedation is commonly used by emergency department (ED) doctors to minimize pain and discomfort during procedures that may be painful or distressing for patients. Effective procedural sedation requires the administration of analgesia, anxiolysis, sedation, and amnesia. This is typically achieved through the use of a combination of short-acting analgesics and sedatives.

There are different levels of sedation, ranging from minimal sedation (anxiolysis) to general anesthesia. It is important for clinicians to understand the level of sedation being used and to be able to manage any unintended deeper levels of sedation that may occur. Deeper levels of sedation are similar to general anesthesia and require the same level of care and monitoring.

Various drugs can be used for procedural sedation, including propofol, midazolam, ketamine, and fentanyl. Each of these drugs has its own mechanism of action and side effects. Propofol is commonly used for sedation, amnesia, and induction and maintenance of general anesthesia. Midazolam is a benzodiazepine that enhances the effect of GABA on the GABA A receptors. Ketamine is an NMDA receptor antagonist and is used for dissociative sedation. Fentanyl is a highly potent opioid used for analgesia and sedation.

The doses of these drugs for procedural sedation in the ED vary depending on the drug and the route of administration. It is important for clinicians to be familiar with the appropriate doses and onset and peak effect times for each drug.

Safe sedation requires certain requirements, including appropriate staffing levels, competencies of the sedating practitioner, location and facilities, and monitoring. The level of sedation being used determines the specific requirements for safe sedation.

After the procedure, patients should be monitored until they meet the criteria for safe discharge. This includes returning to their baseline level of consciousness, having vital signs within normal limits, and not experiencing compromised respiratory status. Pain and discomfort should also be addressed before discharge.

Early signs of local anaesthetic systemic toxicity (LAST) can include numbness around the mouth and tongue, a metallic taste in the mouth, feeling lightheaded or dizzy, and experiencing visual and auditory disturbances. LAST is a rare but serious complication that can occur when administering anesthesia. It is important for healthcare providers to be aware of the signs and symptoms of LAST, as early recognition can lead to better outcomes. Additionally, hyperventilation can temporarily lower calcium levels, which can cause numbness around the mouth.

Further Reading:

Local anaesthetics, such as lidocaine, bupivacaine, and prilocaine, are commonly used in the emergency department for topical or local infiltration to establish a field block. Lidocaine is often the first choice for field block prior to central line insertion. These anaesthetics work by blocking sodium channels, preventing the propagation of action potentials.

However, local anaesthetics can enter the systemic circulation and cause toxic side effects if administered in high doses. Clinicians must be aware of the signs and symptoms of local anaesthetic systemic toxicity (LAST) and know how to respond. Early signs of LAST include numbness around the mouth or tongue, metallic taste, dizziness, visual and auditory disturbances, disorientation, and drowsiness. If not addressed, LAST can progress to more severe symptoms such as seizures, coma, respiratory depression, and cardiovascular dysfunction.

The management of LAST is largely supportive. Immediate steps include stopping the administration of local anaesthetic, calling for help, providing 100% oxygen and securing the airway, establishing IV access, and controlling seizures with benzodiazepines or other medications. Cardiovascular status should be continuously assessed, and conventional therapies may be used to treat hypotension or arrhythmias. Intravenous lipid emulsion (intralipid) may also be considered as a treatment option.

If the patient goes into cardiac arrest, CPR should be initiated following ALS arrest algorithms, but lidocaine should not be used as an anti-arrhythmic therapy. Prolonged resuscitation may be necessary, and intravenous lipid emulsion should be administered. After the acute episode, the patient should be transferred to a clinical area with appropriate equipment and staff for further monitoring and care.

It is important to report cases of local anaesthetic toxicity to the appropriate authorities, such as the National Patient Safety Agency in the UK or the Irish Medicines Board in the Republic of Ireland. Additionally, regular clinical review should be conducted to exclude pancreatitis, as intravenous lipid emulsion can interfere with amylase or lipase assays.

According to the guidelines of the Difficult Airway Society, it is recommended to limit intubation attempts to a maximum of three. However, if the first three attempts are unsuccessful, a more experienced colleague may make a fourth attempt. If all four attempts are unsuccessful, the intubation should be declared as a failure.

Further Reading:

A difficult airway refers to a situation where factors have been identified that make airway management more challenging. These factors can include body habitus, head and neck anatomy, mouth characteristics, jaw abnormalities, and neck mobility. The LEMON criteria can be used to predict difficult intubation by assessing these factors. The criteria include looking externally at these factors, evaluating the 3-3-2 rule which assesses the space in the mouth and neck, assessing the Mallampati score which measures the distance between the tongue base and roof of the mouth, and considering any upper airway obstructions or reduced neck mobility.

Direct laryngoscopy is a method used to visualize the larynx and assess the size of the tracheal opening. The Cormack-Lehane grading system can be used to classify the tracheal opening, with higher grades indicating more difficult access. In cases of a failed airway, where intubation attempts are unsuccessful and oxygenation cannot be maintained, the immediate priority is to oxygenate the patient and prevent hypoxic brain injury. This can be done through various measures such as using a bag-valve-mask ventilation, high flow oxygen, suctioning, and optimizing head positioning.

If oxygenation cannot be maintained, it is important to call for help from senior medical professionals and obtain a difficult airway trolley if not already available. If basic airway management techniques do not improve oxygenation, further intubation attempts may be considered using different equipment or techniques. If oxygen saturations remain below 90%, a surgical airway such as a cricothyroidotomy may be necessary.

Post-intubation hypoxia can occur for various reasons, and the mnemonic DOPES can be used to identify and address potential problems. DOPES stands for displacement of the endotracheal tube, obstruction, pneumothorax, equipment failure, and stacked breaths. If intubation attempts fail, a maximum of three attempts should be made before moving to an alternative plan, such as using a laryngeal mask airway or considering a cricothyroidotomy.

The appropriate dosage of suxamethonium for rapid sequence intubation (RSI) in adults is between 1 and 1.5 milligrams per kilogram of body weight.

Further Reading:

Rapid sequence induction (RSI) is a method used to place an endotracheal tube (ETT) in the trachea while minimizing the risk of aspiration. It involves inducing loss of consciousness while applying cricoid pressure, followed by intubation without face mask ventilation. The steps of RSI can be remembered using the 7 P’s: preparation, pre-oxygenation, pre-treatment, paralysis and induction, protection and positioning, placement with proof, and post-intubation management.

Preparation involves preparing the patient, equipment, team, and anticipating any difficulties that may arise during the procedure. Pre-oxygenation is important to ensure the patient has an adequate oxygen reserve and prolongs the time before desaturation. This is typically done by breathing 100% oxygen for 3 minutes. Pre-treatment involves administering drugs to counter expected side effects of the procedure and anesthesia agents used.

Paralysis and induction involve administering a rapid-acting induction agent followed by a neuromuscular blocking agent. Commonly used induction agents include propofol, ketamine, thiopentone, and etomidate. The neuromuscular blocking agents can be depolarizing (such as suxamethonium) or non-depolarizing (such as rocuronium). Depolarizing agents bind to acetylcholine receptors and generate an action potential, while non-depolarizing agents act as competitive antagonists.

Protection and positioning involve applying cricoid pressure to prevent regurgitation of gastric contents and positioning the patient’s neck appropriately. Tube placement is confirmed by visualizing the tube passing between the vocal cords, auscultation of the chest and stomach, end-tidal CO2 measurement, and visualizing misting of the tube. Post-intubation management includes standard care such as monitoring ECG, SpO2, NIBP, capnography, and maintaining sedation and neuromuscular blockade.

Overall, RSI is a technique used to quickly and safely secure the airway in patients who may be at risk of aspiration. It involves a series of steps to ensure proper preparation, oxygenation, drug administration, and tube placement. Monitoring and post-intubation care are also important aspects of RSI.

Bier’s block is a regional intravenous anesthesia technique commonly used for minor surgical procedures of the forearm or for reducing distal radius fractures in the emergency department (ED). It is recommended by NICE as the preferred anesthesia block for adults requiring manipulation of distal forearm fractures in the ED.

Before performing the procedure, a pre-procedure checklist should be completed, including obtaining consent, recording the patient’s weight, ensuring the resuscitative equipment is available, and monitoring the patient’s vital signs throughout the procedure. The air cylinder should be checked if not using an electronic machine, and the cuff should be checked for leaks.

During the procedure, a double cuff tourniquet is placed on the upper arm, and the arm is elevated to exsanguinate the limb. The proximal cuff is inflated to a pressure 100 mmHg above the systolic blood pressure, up to a maximum of 300 mmHg. The time of inflation and pressure should be recorded, and the absence of the radial pulse should be confirmed. 0.5% plain prilocaine is then injected slowly, and the time of injection is recorded. The patient should be warned about the potential cold/hot sensation and mottled appearance of the arm. After injection, the cannula is removed and pressure is applied to the venipuncture site to prevent bleeding. After approximately 10 minutes, the patient should have anesthesia and should not feel pain during manipulation. If anesthesia is successful, the manipulation can be performed, and a plaster can be applied by a second staff member. A check x-ray should be obtained with the arm lowered onto a pillow. The tourniquet should be monitored at all times, and the cuff should be inflated for a minimum of 20 minutes and a maximum of 45 minutes. If rotation of the cuff is required, it should be done after the manipulation and plaster application. After the post-reduction x-ray is satisfactory, the cuff can be deflated while observing the patient and monitors. Limb circulation should be checked prior to discharge, and appropriate follow-up and analgesia should be arranged.

There are several contraindications to performing Bier’s block, including allergy to local anesthetic, hypertension over 200 mm Hg, infection in the limb, lymphedema, methemoglobinemia, morbid obesity, peripheral vascular disease, procedures needed in both arms, Raynaud’s phenomenon, scleroderma, severe hypertension and sickle cell disease.

To determine the amount of oxygen needed for a transfer, you can use the formula: 2 x Minute Volume (MV) x FiO2 x transfer time in minutes. This formula calculates the volume of oxygen that should be taken on the transfer. The Minute Volume (MV) represents the expected oxygen consumption. It is recommended to double the expected consumption to account for any unforeseen delays or increased oxygen demand during the transfer. Therefore, the second equation is used to calculate the volume of oxygen that will be taken on the transfer.

Further Reading:

Transfer of critically ill patients in the emergency department is a common occurrence and can involve intra-hospital transfers or transfers to another hospital. However, there are several risks associated with these transfers that doctors need to be aware of and manage effectively.

Technical risks include equipment failure or inadequate equipment, unreliable power or oxygen supply, incompatible equipment, restricted positioning, and restricted monitoring equipment. These technical issues can hinder the ability to detect and treat problems with ventilation, blood pressure control, and arrhythmias during the transfer.

Non-technical risks involve limited personal and medical team during the transfer, isolation and lack of resources in the receiving hospital, and problems with communication and liaison between the origin and destination sites.

Organizational risks can be mitigated by having a dedicated consultant lead for transfers who is responsible for producing guidelines, training staff, standardizing protocols, equipment, and documentation, as well as capturing data and conducting audits.

To optimize the patient’s clinical condition before transfer, several key steps should be taken. These include ensuring a low threshold for intubation and anticipating airway and ventilation problems, securing the endotracheal tube (ETT) and verifying its position, calculating oxygen requirements and ensuring an adequate supply, monitoring for circulatory issues and inserting at least two IV accesses, providing ongoing analgesia and sedation, controlling seizures, and addressing any fractures or temperature changes.

It is also important to have the necessary equipment and personnel for the transfer. Standard monitoring equipment should include ECG, oxygen saturation, blood pressure, temperature, and capnographic monitoring for ventilated patients. Additional monitoring may be required depending on the level of care needed by the patient.

In terms of oxygen supply, it is standard practice to calculate the expected oxygen consumption during transfer and multiply it by two to ensure an additional supply in case of delays. The suggested oxygen supply for transfer can be calculated using the minute volume, fraction of inspired oxygen, and estimated transfer time.

Overall, managing the risks associated with patient transfers requires careful planning, communication, and coordination to ensure the safety and well-being of critically ill patients.

Thiopental sodium is a barbiturate with a very short duration of action. It is primarily used to induce anesthesia. Barbiturates are believed to primarily affect synapses by reducing the sensitivity of postsynaptic receptors to neurotransmitters and by interfering with the release of neurotransmitters from presynaptic neurons.

Thiopental sodium specifically binds to a unique site associated with a chloride ionophore at the GABAA receptor, which is responsible for the opening of chloride ion channels. This binding increases the length of time that the chloride ionophore remains open. As a result, the inhibitory effect of GABA on postsynaptic neurons in the thalamus is prolonged.

In summary, thiopental sodium acts as a short-acting barbiturate that is commonly used to induce anesthesia. It affects synapses by reducing postsynaptic receptor sensitivity and interfering with neurotransmitter release. By binding to a specific site at the GABAA receptor, thiopental sodium prolongs the inhibitory effect of GABA in the thalamus.

Inspired oxygen primarily works by removing nitrogen from the lungs, which would otherwise take up a significant portion of the lung capacity. This nitrogen is replaced with oxygen, leading to improved oxygenation of the tissues and an increased oxygen reserve. As a result, the patient can safely hold their breath for a longer period of time. It is recommended to preoxygenate the patient for at least 3 minutes.

Further Reading:

Rapid sequence induction (RSI) is a method used to place an endotracheal tube (ETT) in the trachea while minimizing the risk of aspiration. It involves inducing loss of consciousness while applying cricoid pressure, followed by intubation without face mask ventilation. The steps of RSI can be remembered using the 7 P’s: preparation, pre-oxygenation, pre-treatment, paralysis and induction, protection and positioning, placement with proof, and post-intubation management.

Preparation involves preparing the patient, equipment, team, and anticipating any difficulties that may arise during the procedure. Pre-oxygenation is important to ensure the patient has an adequate oxygen reserve and prolongs the time before desaturation. This is typically done by breathing 100% oxygen for 3 minutes. Pre-treatment involves administering drugs to counter expected side effects of the procedure and anesthesia agents used.

Paralysis and induction involve administering a rapid-acting induction agent followed by a neuromuscular blocking agent. Commonly used induction agents include propofol, ketamine, thiopentone, and etomidate. The neuromuscular blocking agents can be depolarizing (such as suxamethonium) or non-depolarizing (such as rocuronium). Depolarizing agents bind to acetylcholine receptors and generate an action potential, while non-depolarizing agents act as competitive antagonists.

Protection and positioning involve applying cricoid pressure to prevent regurgitation of gastric contents and positioning the patient’s neck appropriately. Tube placement is confirmed by visualizing the tube passing between the vocal cords, auscultation of the chest and stomach, end-tidal CO2 measurement, and visualizing misting of the tube. Post-intubation management includes standard care such as monitoring ECG, SpO2, NIBP, capnography, and maintaining sedation and neuromuscular blockade.

Overall, RSI is a technique used to quickly and safely secure the airway in patients who may be at risk of aspiration. It involves a series of steps to ensure proper preparation, oxygenation, drug administration, and tube placement. Monitoring and post-intubation care are also important aspects of RSI.

During Bier’s block, the cuff is inflated to a pressure that is 100 mmHg higher than the patient’s systolic blood pressure. For example, if the systolic blood pressure is 150 mmHg, the cuff would be inflated to 250 mmHg. It is important to note that Bier’s block should not be performed if the systolic blood pressure is greater than 200 mmHg, as this is considered a contraindication. Therefore, the maximum pressure ever used during Bier’s block is 300mmHg.

Further Reading:

Bier’s block is a regional intravenous anesthesia technique commonly used for minor surgical procedures of the forearm or for reducing distal radius fractures in the emergency department (ED). It is recommended by NICE as the preferred anesthesia block for adults requiring manipulation of distal forearm fractures in the ED.

Before performing the procedure, a pre-procedure checklist should be completed, including obtaining consent, recording the patient’s weight, ensuring the resuscitative equipment is available, and monitoring the patient’s vital signs throughout the procedure. The air cylinder should be checked if not using an electronic machine, and the cuff should be checked for leaks.

During the procedure, a double cuff tourniquet is placed on the upper arm, and the arm is elevated to exsanguinate the limb. The proximal cuff is inflated to a pressure 100 mmHg above the systolic blood pressure, up to a maximum of 300 mmHg. The time of inflation and pressure should be recorded, and the absence of the radial pulse should be confirmed. 0.5% plain prilocaine is then injected slowly, and the time of injection is recorded. The patient should be warned about the potential cold/hot sensation and mottled appearance of the arm. After injection, the cannula is removed and pressure is applied to the venipuncture site to prevent bleeding. After approximately 10 minutes, the patient should have anesthesia and should not feel pain during manipulation. If anesthesia is successful, the manipulation can be performed, and a plaster can be applied by a second staff member. A check x-ray should be obtained with the arm lowered onto a pillow. The tourniquet should be monitored at all times, and the cuff should be inflated for a minimum of 20 minutes and a maximum of 45 minutes. If rotation of the cuff is required, it should be done after the manipulation and plaster application. After the post-reduction x-ray is satisfactory, the cuff can be deflated while observing the patient and monitors. Limb circulation should be checked prior to discharge, and appropriate follow-up and analgesia should be arranged.

There are several contraindications to performing Bier’s block, including allergy to local anesthetic, hypertension over 200 mm Hg, infection in the limb, lymphedema, methemoglobinemia, morbid obesity, peripheral vascular disease, procedures needed in both arms, Raynaud’s phenomenon, scleroderma, severe hypertension and sickle cell disease.

The administration of nitrous oxide increases the amount of inhaled anaesthetic gases in the body through a phenomenon called the ‘second gas effect’. Nitrous oxide is much more soluble than nitrogen, with a solubility that is 20 to 30 times higher. When nitrous oxide is given, it causes a decrease in the volume of air in the alveoli. Additionally, nitrous oxide can enhance the absorption of other inhaled anaesthetic agents through the second gas effect. However, it is important to note that nitrous oxide alone cannot be used as the sole maintenance agent in anaesthesia.

Further Reading:

Entonox® is a mixture of 50% nitrous oxide and 50% oxygen that can be used for self-administration to reduce anxiety. It can also be used alongside other anesthesia agents. However, its mechanism of action for anxiety reduction is not fully understood. The Entonox bottles are typically identified by blue and white color-coded collars, but a new standard will replace these with dark blue shoulders in the future. It is important to note that Entonox alone cannot be used as the sole maintenance agent in anesthesia.

One of the effects of nitrous oxide is the second-gas effect, where it speeds up the absorption of other inhaled anesthesia agents. Nitrous oxide enters the alveoli and diffuses into the blood, displacing nitrogen. This displacement causes the remaining alveolar gases to become more concentrated, increasing the fractional content of inhaled anesthesia gases and accelerating the uptake of volatile agents into the blood.

However, when nitrous oxide administration is stopped, it can cause diffusion hypoxia. Nitrous oxide exits the blood and diffuses back into the alveoli, while nitrogen diffuses in the opposite direction. Nitrous oxide enters the alveoli much faster than nitrogen leaves, resulting in the dilution of oxygen within the alveoli. This can lead to diffusion hypoxia, where the oxygen concentration in the alveoli is diluted, potentially causing oxygen deprivation in patients breathing air.

There are certain contraindications for using nitrous oxide, as it can expand in air-filled spaces. It should be avoided in conditions such as head injuries with intracranial air, pneumothorax, recent intraocular gas injection, and entrapped air following a recent underwater dive.

Atropine acts as a blocker for muscarinic acetylcholine receptors, making it an antagonist. It is commonly administered during peri-arrest bradycardia. In adults, a dose of 500 mcg is given every 3-5 minutes, with a maximum total dose of 3mg. On the other hand, the initial intravenous dose of amiodarone is 300 mg. Amiodarone works by prolonging repolarization and decreasing myocardial excitability. Additionally, lidocaine functions by blocking sodium channels.

Further Reading:

In the management of respiratory and cardiac arrest, several drugs are commonly used to help restore normal function and improve outcomes. Adrenaline is a non-selective agonist of adrenergic receptors and is administered intravenously at a dose of 1 mg every 3-5 minutes. It works by causing vasoconstriction, increasing systemic vascular resistance (SVR), and improving cardiac output by increasing the force of heart contraction. Adrenaline also has bronchodilatory effects.

Amiodarone is another drug used in cardiac arrest situations. It blocks voltage-gated potassium channels, which prolongs repolarization and reduces myocardial excitability. The initial dose of amiodarone is 300 mg intravenously after 3 shocks, followed by a dose of 150 mg after 5 shocks.

Lidocaine is an alternative to amiodarone in cardiac arrest situations. It works by blocking sodium channels and decreasing heart rate. The recommended dose is 1 mg/kg by slow intravenous injection, with a repeat half of the initial dose after 5 minutes. The maximum total dose of lidocaine is 3 mg/kg.

Magnesium sulfate is used to reverse myocardial hyperexcitability associated with hypomagnesemia. It is administered intravenously at a dose of 2 g over 10-15 minutes. An additional dose may be given if necessary, but the maximum total dose should not exceed 3 g.

Atropine is an antagonist of muscarinic acetylcholine receptors and is used to counteract the slowing of heart rate caused by the parasympathetic nervous system. It is administered intravenously at a dose of 500 mcg every 3-5 minutes, with a maximum dose of 3 mg.

Naloxone is a competitive antagonist for opioid receptors and is used in cases of respiratory arrest caused by opioid overdose. It has a short duration of action, so careful monitoring is necessary. The initial dose of naloxone is 400 micrograms, followed by 800 mcg after 1 minute. The dose can be gradually escalated up to 2 mg per dose if there is no response to the preceding dose.

It is important for healthcare professionals to have knowledge of the pharmacology and dosing schedules of these drugs in order to effectively manage respiratory and cardiac arrest situations.

Instances of local anaesthetic systemic toxicity (LAST) should be promptly reported to the National Patient Safety Agency (NPSA). Additionally, it is advisable to report any adverse drug reactions to the Medicines and Healthcare products Regulatory Agency (MHRA) through their yellow card scheme. Please refer to the follow-up section in the notes for further details.

Further Reading:

Local anaesthetics, such as lidocaine, bupivacaine, and prilocaine, are commonly used in the emergency department for topical or local infiltration to establish a field block. Lidocaine is often the first choice for field block prior to central line insertion. These anaesthetics work by blocking sodium channels, preventing the propagation of action potentials.

However, local anaesthetics can enter the systemic circulation and cause toxic side effects if administered in high doses. Clinicians must be aware of the signs and symptoms of local anaesthetic systemic toxicity (LAST) and know how to respond. Early signs of LAST include numbness around the mouth or tongue, metallic taste, dizziness, visual and auditory disturbances, disorientation, and drowsiness. If not addressed, LAST can progress to more severe symptoms such as seizures, coma, respiratory depression, and cardiovascular dysfunction.

The management of LAST is largely supportive. Immediate steps include stopping the administration of local anaesthetic, calling for help, providing 100% oxygen and securing the airway, establishing IV access, and controlling seizures with benzodiazepines or other medications. Cardiovascular status should be continuously assessed, and conventional therapies may be used to treat hypotension or arrhythmias. Intravenous lipid emulsion (intralipid) may also be considered as a treatment option.

If the patient goes into cardiac arrest, CPR should be initiated following ALS arrest algorithms, but lidocaine should not be used as an anti-arrhythmic therapy. Prolonged resuscitation may be necessary, and intravenous lipid emulsion should be administered. After the acute episode, the patient should be transferred to a clinical area with appropriate equipment and staff for further monitoring and care.

It is important to report cases of local anaesthetic toxicity to the appropriate authorities, such as the National Patient Safety Agency in the UK or the Irish Medicines Board in the Republic of Ireland. Additionally, regular clinical review should be conducted to exclude pancreatitis, as intravenous lipid emulsion can interfere with amylase or lipase assays.

Ketamine administration can lead to various side effects, including nystagmus and diplopia. Other potential side effects include tachycardia, hypertension, laryngospasm, unpleasant hallucinations or emergence phenomena, nausea and vomiting, hypersalivation, increased intracranial and intraocular pressure, and abnormal tonic-clonic movements.

Further Reading:

There are four commonly used induction agents in the UK: propofol, ketamine, thiopentone, and etomidate.

Propofol is a 1% solution that produces significant venodilation and myocardial depression. It can also reduce cerebral perfusion pressure. The typical dose for propofol is 1.5-2.5 mg/kg. However, it can cause side effects such as hypotension, respiratory depression, and pain at the site of injection.

Ketamine is another induction agent that produces a dissociative state. It does not display a dose-response continuum, meaning that the effects do not necessarily increase with higher doses. Ketamine can cause bronchodilation, which is useful in patients with asthma. The initial dose for ketamine is 0.5-2 mg/kg, with a typical IV dose of 1.5 mg/kg. Side effects of ketamine include tachycardia, hypertension, laryngospasm, unpleasant hallucinations, nausea and vomiting, hypersalivation, increased intracranial and intraocular pressure, nystagmus and diplopia, abnormal movements, and skin reactions.

Thiopentone is an ultra-short acting barbiturate that acts on the GABA receptor complex. It decreases cerebral metabolic oxygen and reduces cerebral blood flow and intracranial pressure. The adult dose for thiopentone is 3-5 mg/kg, while the child dose is 5-8 mg/kg. However, these doses should be halved in patients with hypovolemia. Side effects of thiopentone include venodilation, myocardial depression, and hypotension. It is contraindicated in patients with acute porphyrias and myotonic dystrophy.

Etomidate is the most haemodynamically stable induction agent and is useful in patients with hypovolemia, anaphylaxis, and asthma. It has similar cerebral effects to thiopentone. The dose for etomidate is 0.15-0.3 mg/kg. Side effects of etomidate include injection site pain, movement disorders, adrenal insufficiency, and apnoea. It is contraindicated in patients with sepsis due to adrenal suppression.

Entonox®, also known as ‘gas and air’ or ‘laughing gas’, is a combination of nitrous oxide and oxygen in equal proportions. It offers a mild sedative effect and helps reduce anxiety.

Further Reading:

Procedural sedation is commonly used by emergency department (ED) doctors to minimize pain and discomfort during procedures that may be painful or distressing for patients. Effective procedural sedation requires the administration of analgesia, anxiolysis, sedation, and amnesia. This is typically achieved through the use of a combination of short-acting analgesics and sedatives.

There are different levels of sedation, ranging from minimal sedation (anxiolysis) to general anesthesia. It is important for clinicians to understand the level of sedation being used and to be able to manage any unintended deeper levels of sedation that may occur. Deeper levels of sedation are similar to general anesthesia and require the same level of care and monitoring.

Various drugs can be used for procedural sedation, including propofol, midazolam, ketamine, and fentanyl. Each of these drugs has its own mechanism of action and side effects. Propofol is commonly used for sedation, amnesia, and induction and maintenance of general anesthesia. Midazolam is a benzodiazepine that enhances the effect of GABA on the GABA A receptors. Ketamine is an NMDA receptor antagonist and is used for dissociative sedation. Fentanyl is a highly potent opioid used for analgesia and sedation.

The doses of these drugs for procedural sedation in the ED vary depending on the drug and the route of administration. It is important for clinicians to be familiar with the appropriate doses and onset and peak effect times for each drug.

Safe sedation requires certain requirements, including appropriate staffing levels, competencies of the sedating practitioner, location and facilities, and monitoring. The level of sedation being used determines the specific requirements for safe sedation.

After the procedure, patients should be monitored until they meet the criteria for safe discharge. This includes returning to their baseline level of consciousness, having vital signs within normal limits, and not experiencing compromised respiratory status. Pain and discomfort should also be addressed before discharge.

When caring for a patient with a declining Glasgow Coma Scale (GCS) who may require rapid sequence induction (RSI), it is important to consider their medical history. In this case, the patient has a history of asthma. One of the induction medications that is recognized for its bronchodilatory effects and would be appropriate for use in an asthmatic patient is Ketamine.

Further Reading:

There are four commonly used induction agents in the UK: propofol, ketamine, thiopentone, and etomidate.

Propofol is a 1% solution that produces significant venodilation and myocardial depression. It can also reduce cerebral perfusion pressure. The typical dose for propofol is 1.5-2.5 mg/kg. However, it can cause side effects such as hypotension, respiratory depression, and pain at the site of injection.

Ketamine is another induction agent that produces a dissociative state. It does not display a dose-response continuum, meaning that the effects do not necessarily increase with higher doses. Ketamine can cause bronchodilation, which is useful in patients with asthma. The initial dose for ketamine is 0.5-2 mg/kg, with a typical IV dose of 1.5 mg/kg. Side effects of ketamine include tachycardia, hypertension, laryngospasm, unpleasant hallucinations, nausea and vomiting, hypersalivation, increased intracranial and intraocular pressure, nystagmus and diplopia, abnormal movements, and skin reactions.

Thiopentone is an ultra-short acting barbiturate that acts on the GABA receptor complex. It decreases cerebral metabolic oxygen and reduces cerebral blood flow and intracranial pressure. The adult dose for thiopentone is 3-5 mg/kg, while the child dose is 5-8 mg/kg. However, these doses should be halved in patients with hypovolemia. Side effects of thiopentone include venodilation, myocardial depression, and hypotension. It is contraindicated in patients with acute porphyrias and myotonic dystrophy.

Etomidate is the most haemodynamically stable induction agent and is useful in patients with hypovolemia, anaphylaxis, and asthma. It has similar cerebral effects to thiopentone. The dose for etomidate is 0.15-0.3 mg/kg. Side effects of etomidate include injection site pain, movement disorders, adrenal insufficiency, and apnoea. It is contraindicated in patients with sepsis due to adrenal suppression.

Methaemoglobinaemia is a condition that can occur when prilocaine is used, particularly when administered at doses higher than 16 mg/kg.

Further Reading:

Local anaesthetics, such as lidocaine, bupivacaine, and prilocaine, are commonly used in the emergency department for topical or local infiltration to establish a field block. Lidocaine is often the first choice for field block prior to central line insertion. These anaesthetics work by blocking sodium channels, preventing the propagation of action potentials.

However, local anaesthetics can enter the systemic circulation and cause toxic side effects if administered in high doses. Clinicians must be aware of the signs and symptoms of local anaesthetic systemic toxicity (LAST) and know how to respond. Early signs of LAST include numbness around the mouth or tongue, metallic taste, dizziness, visual and auditory disturbances, disorientation, and drowsiness. If not addressed, LAST can progress to more severe symptoms such as seizures, coma, respiratory depression, and cardiovascular dysfunction.

The management of LAST is largely supportive. Immediate steps include stopping the administration of local anaesthetic, calling for help, providing 100% oxygen and securing the airway, establishing IV access, and controlling seizures with benzodiazepines or other medications. Cardiovascular status should be continuously assessed, and conventional therapies may be used to treat hypotension or arrhythmias. Intravenous lipid emulsion (intralipid) may also be considered as a treatment option.

If the patient goes into cardiac arrest, CPR should be initiated following ALS arrest algorithms, but lidocaine should not be used as an anti-arrhythmic therapy. Prolonged resuscitation may be necessary, and intravenous lipid emulsion should be administered. After the acute episode, the patient should be transferred to a clinical area with appropriate equipment and staff for further monitoring and care.

It is important to report cases of local anaesthetic toxicity to the appropriate authorities, such as the National Patient Safety Agency in the UK or the Irish Medicines Board in the Republic of Ireland. Additionally, regular clinical review should be conducted to exclude pancreatitis, as intravenous lipid emulsion can interfere with amylase or lipase assays.

Ketamine primarily works by blocking NMDA receptors, although its complete mechanism of action is not yet fully comprehended. Ongoing research is exploring its impact on various other receptors.

Further Reading:

Procedural sedation is commonly used by emergency department (ED) doctors to minimize pain and discomfort during procedures that may be painful or distressing for patients. Effective procedural sedation requires the administration of analgesia, anxiolysis, sedation, and amnesia. This is typically achieved through the use of a combination of short-acting analgesics and sedatives.

There are different levels of sedation, ranging from minimal sedation (anxiolysis) to general anesthesia. It is important for clinicians to understand the level of sedation being used and to be able to manage any unintended deeper levels of sedation that may occur. Deeper levels of sedation are similar to general anesthesia and require the same level of care and monitoring.

Various drugs can be used for procedural sedation, including propofol, midazolam, ketamine, and fentanyl. Each of these drugs has its own mechanism of action and side effects. Propofol is commonly used for sedation, amnesia, and induction and maintenance of general anesthesia. Midazolam is a benzodiazepine that enhances the effect of GABA on the GABA A receptors. Ketamine is an NMDA receptor antagonist and is used for dissociative sedation. Fentanyl is a highly potent opioid used for analgesia and sedation.

The doses of these drugs for procedural sedation in the ED vary depending on the drug and the route of administration. It is important for clinicians to be familiar with the appropriate doses and onset and peak effect times for each drug.

Safe sedation requires certain requirements, including appropriate staffing levels, competencies of the sedating practitioner, location and facilities, and monitoring. The level of sedation being used determines the specific requirements for safe sedation.

After the procedure, patients should be monitored until they meet the criteria for safe discharge. This includes returning to their baseline level of consciousness, having vital signs within normal limits, and not experiencing compromised respiratory status. Pain and discomfort should also be addressed before discharge.