The appropriate dosage of suxamethonium for rapid sequence intubation (RSI) in adults is between 1 and 1.5 milligrams per kilogram of body weight.

Further Reading:

Rapid sequence induction (RSI) is a method used to place an endotracheal tube (ETT) in the trachea while minimizing the risk of aspiration. It involves inducing loss of consciousness while applying cricoid pressure, followed by intubation without face mask ventilation. The steps of RSI can be remembered using the 7 P’s: preparation, pre-oxygenation, pre-treatment, paralysis and induction, protection and positioning, placement with proof, and post-intubation management.

Preparation involves preparing the patient, equipment, team, and anticipating any difficulties that may arise during the procedure. Pre-oxygenation is important to ensure the patient has an adequate oxygen reserve and prolongs the time before desaturation. This is typically done by breathing 100% oxygen for 3 minutes. Pre-treatment involves administering drugs to counter expected side effects of the procedure and anesthesia agents used.

Paralysis and induction involve administering a rapid-acting induction agent followed by a neuromuscular blocking agent. Commonly used induction agents include propofol, ketamine, thiopentone, and etomidate. The neuromuscular blocking agents can be depolarizing (such as suxamethonium) or non-depolarizing (such as rocuronium). Depolarizing agents bind to acetylcholine receptors and generate an action potential, while non-depolarizing agents act as competitive antagonists.

Protection and positioning involve applying cricoid pressure to prevent regurgitation of gastric contents and positioning the patient’s neck appropriately. Tube placement is confirmed by visualizing the tube passing between the vocal cords, auscultation of the chest and stomach, end-tidal CO2 measurement, and visualizing misting of the tube. Post-intubation management includes standard care such as monitoring ECG, SpO2, NIBP, capnography, and maintaining sedation and neuromuscular blockade.

Overall, RSI is a technique used to quickly and safely secure the airway in patients who may be at risk of aspiration. It involves a series of steps to ensure proper preparation, oxygenation, drug administration, and tube placement. Monitoring and post-intubation care are also important aspects of RSI.

Amiodarone functions by inhibiting voltage-gated potassium channels, leading to an extended repolarization period and decreased excitability of the heart muscle.

Further Reading:

In the management of respiratory and cardiac arrest, several drugs are commonly used to help restore normal function and improve outcomes. Adrenaline is a non-selective agonist of adrenergic receptors and is administered intravenously at a dose of 1 mg every 3-5 minutes. It works by causing vasoconstriction, increasing systemic vascular resistance (SVR), and improving cardiac output by increasing the force of heart contraction. Adrenaline also has bronchodilatory effects.

Amiodarone is another drug used in cardiac arrest situations. It blocks voltage-gated potassium channels, which prolongs repolarization and reduces myocardial excitability. The initial dose of amiodarone is 300 mg intravenously after 3 shocks, followed by a dose of 150 mg after 5 shocks.

Lidocaine is an alternative to amiodarone in cardiac arrest situations. It works by blocking sodium channels and decreasing heart rate. The recommended dose is 1 mg/kg by slow intravenous injection, with a repeat half of the initial dose after 5 minutes. The maximum total dose of lidocaine is 3 mg/kg.

Magnesium sulfate is used to reverse myocardial hyperexcitability associated with hypomagnesemia. It is administered intravenously at a dose of 2 g over 10-15 minutes. An additional dose may be given if necessary, but the maximum total dose should not exceed 3 g.

Atropine is an antagonist of muscarinic acetylcholine receptors and is used to counteract the slowing of heart rate caused by the parasympathetic nervous system. It is administered intravenously at a dose of 500 mcg every 3-5 minutes, with a maximum dose of 3 mg.

Naloxone is a competitive antagonist for opioid receptors and is used in cases of respiratory arrest caused by opioid overdose. It has a short duration of action, so careful monitoring is necessary. The initial dose of naloxone is 400 micrograms, followed by 800 mcg after 1 minute. The dose can be gradually escalated up to 2 mg per dose if there is no response to the preceding dose.

It is important for healthcare professionals to have knowledge of the pharmacology and dosing schedules of these drugs in order to effectively manage respiratory and cardiac arrest situations.

Suxamethonium, also called succinylcholine, is currently the sole depolarising neuromuscular blocking drug used in clinical settings. It functions by binding to acetylcholine (Ach) receptors as an agonist. Unlike acetylcholine, it is not broken down by acetylcholinesterase, leading to a longer duration of binding and prolonged inhibition of neuromuscular transmission. Eventually, it is metabolized by plasma cholinesterase (pseudocholinesterase).

Further Reading:

Rapid sequence induction (RSI) is a method used to place an endotracheal tube (ETT) in the trachea while minimizing the risk of aspiration. It involves inducing loss of consciousness while applying cricoid pressure, followed by intubation without face mask ventilation. The steps of RSI can be remembered using the 7 P’s: preparation, pre-oxygenation, pre-treatment, paralysis and induction, protection and positioning, placement with proof, and post-intubation management.

Preparation involves preparing the patient, equipment, team, and anticipating any difficulties that may arise during the procedure. Pre-oxygenation is important to ensure the patient has an adequate oxygen reserve and prolongs the time before desaturation. This is typically done by breathing 100% oxygen for 3 minutes. Pre-treatment involves administering drugs to counter expected side effects of the procedure and anesthesia agents used.

Paralysis and induction involve administering a rapid-acting induction agent followed by a neuromuscular blocking agent. Commonly used induction agents include propofol, ketamine, thiopentone, and etomidate. The neuromuscular blocking agents can be depolarizing (such as suxamethonium) or non-depolarizing (such as rocuronium). Depolarizing agents bind to acetylcholine receptors and generate an action potential, while non-depolarizing agents act as competitive antagonists.

Protection and positioning involve applying cricoid pressure to prevent regurgitation of gastric contents and positioning the patient’s neck appropriately. Tube placement is confirmed by visualizing the tube passing between the vocal cords, auscultation of the chest and stomach, end-tidal CO2 measurement, and visualizing misting of the tube. Post-intubation management includes standard care such as monitoring ECG, SpO2, NIBP, capnography, and maintaining sedation and neuromuscular blockade.

Overall, RSI is a technique used to quickly and safely secure the airway in patients who may be at risk of aspiration. It involves a series of steps to ensure proper preparation, oxygenation, drug administration, and tube placement. Monitoring and post-intubation care are also important aspects of RSI.

The administration of nitrous oxide increases the amount of inhaled anaesthetic gases in the body through a phenomenon called the ‘second gas effect’. Nitrous oxide is much more soluble than nitrogen, with a solubility that is 20 to 30 times higher. When nitrous oxide is given, it causes a decrease in the volume of air in the alveoli. Additionally, nitrous oxide can enhance the absorption of other inhaled anaesthetic agents through the second gas effect. However, it is important to note that nitrous oxide alone cannot be used as the sole maintenance agent in anaesthesia.

Further Reading:

Entonox® is a mixture of 50% nitrous oxide and 50% oxygen that can be used for self-administration to reduce anxiety. It can also be used alongside other anesthesia agents. However, its mechanism of action for anxiety reduction is not fully understood. The Entonox bottles are typically identified by blue and white color-coded collars, but a new standard will replace these with dark blue shoulders in the future. It is important to note that Entonox alone cannot be used as the sole maintenance agent in anesthesia.

One of the effects of nitrous oxide is the second-gas effect, where it speeds up the absorption of other inhaled anesthesia agents. Nitrous oxide enters the alveoli and diffuses into the blood, displacing nitrogen. This displacement causes the remaining alveolar gases to become more concentrated, increasing the fractional content of inhaled anesthesia gases and accelerating the uptake of volatile agents into the blood.

However, when nitrous oxide administration is stopped, it can cause diffusion hypoxia. Nitrous oxide exits the blood and diffuses back into the alveoli, while nitrogen diffuses in the opposite direction. Nitrous oxide enters the alveoli much faster than nitrogen leaves, resulting in the dilution of oxygen within the alveoli. This can lead to diffusion hypoxia, where the oxygen concentration in the alveoli is diluted, potentially causing oxygen deprivation in patients breathing air.

There are certain contraindications for using nitrous oxide, as it can expand in air-filled spaces. It should be avoided in conditions such as head injuries with intracranial air, pneumothorax, recent intraocular gas injection, and entrapped air following a recent underwater dive.

Jet ventilation through a needle cricothyroidotomy typically involves using a 1 bar (100 Kpa) oxygen source.

Further Reading:

Cricothyroidotomy, also known as cricothyrotomy, is a procedure used to create an airway by making an incision between the thyroid and cricoid cartilages. This can be done surgically with a scalpel or using a needle method. It is typically used as a short-term solution for establishing an airway in emergency situations where traditional intubation is not possible.

The surgical technique involves dividing the cricothyroid membrane transversely, while some recommend making a longitudinal skin incision first to identify the structures below. Complications of this procedure can include bleeding, infection, incorrect placement resulting in a false passage, fistula formation, cartilage fracture, subcutaneous emphysema, scarring leading to stenosis, and injury to the vocal cords or larynx. There is also a risk of damage to the recurrent laryngeal nerve, and failure to perform the procedure successfully can lead to hypoxia and death.

There are certain contraindications to surgical cricothyroidotomy, such as the availability of less invasive airway securing methods, patients under 12 years old (although a needle technique may be used), laryngeal fracture, pre-existing or acute laryngeal pathology, tracheal transection with retraction into the mediastinum, and obscured anatomical landmarks.

The needle (cannula) cricothyroidotomy involves inserting a cannula through the cricothyroid membrane to access the trachea. This method is mainly used in children in scenarios where ENT assistance is not available. However, there are drawbacks to this approach, including the need for high-pressure oxygen delivery, which can risk barotrauma and may not always be readily available. The cannula is also prone to kinking and displacement, and there is limited evacuation of expiratory gases, making it suitable for only a short period of time before CO2 retention becomes problematic.

In children, the cannula cricothyroidotomy and ventilation procedure involves extending the neck and stabilizing the larynx, inserting a 14g or 16g cannula at a 45-degree angle aiming caudally, confirming the position by aspirating air through a saline-filled syringe, and connecting it to an insufflation device or following specific oxygen pressure and flow settings for jet ventilation.

If a longer-term airway is needed, a cricothyroidotomy may be converted to

In patients with pre-existing hypovolaemia, the amount of sodium thiopentone administered should be reduced by half. This is because sodium thiopentone can cause venodilation and myocardial depression, which can result in significant hypovolaemia. Alternatively, an induction agent that does not cause hypotension, such as Etomidate, can be used instead. It is important to note that both propofol and thiopentone are known to cause hypotension.

Further Reading:

There are four commonly used induction agents in the UK: propofol, ketamine, thiopentone, and etomidate.

Propofol is a 1% solution that produces significant venodilation and myocardial depression. It can also reduce cerebral perfusion pressure. The typical dose for propofol is 1.5-2.5 mg/kg. However, it can cause side effects such as hypotension, respiratory depression, and pain at the site of injection.

Ketamine is another induction agent that produces a dissociative state. It does not display a dose-response continuum, meaning that the effects do not necessarily increase with higher doses. Ketamine can cause bronchodilation, which is useful in patients with asthma. The initial dose for ketamine is 0.5-2 mg/kg, with a typical IV dose of 1.5 mg/kg. Side effects of ketamine include tachycardia, hypertension, laryngospasm, unpleasant hallucinations, nausea and vomiting, hypersalivation, increased intracranial and intraocular pressure, nystagmus and diplopia, abnormal movements, and skin reactions.

Thiopentone is an ultra-short acting barbiturate that acts on the GABA receptor complex. It decreases cerebral metabolic oxygen and reduces cerebral blood flow and intracranial pressure. The adult dose for thiopentone is 3-5 mg/kg, while the child dose is 5-8 mg/kg. However, these doses should be halved in patients with hypovolemia. Side effects of thiopentone include venodilation, myocardial depression, and hypotension. It is contraindicated in patients with acute porphyrias and myotonic dystrophy.

Etomidate is the most haemodynamically stable induction agent and is useful in patients with hypovolemia, anaphylaxis, and asthma. It has similar cerebral effects to thiopentone. The dose for etomidate is 0.15-0.3 mg/kg. Side effects of etomidate include injection site pain, movement disorders, adrenal insufficiency, and apnoea. It is contraindicated in patients with sepsis due to adrenal suppression.

Adrenaline acts on all types of adrenergic receptors without preference. It is administered in doses of 1 mg every 3-5 minutes during cardiac arrest. On the other hand, Amiodarone functions by blocking voltage-gated potassium channels and is typically administered after the third shock.

Further Reading:

In the management of respiratory and cardiac arrest, several drugs are commonly used to help restore normal function and improve outcomes. Adrenaline is a non-selective agonist of adrenergic receptors and is administered intravenously at a dose of 1 mg every 3-5 minutes. It works by causing vasoconstriction, increasing systemic vascular resistance (SVR), and improving cardiac output by increasing the force of heart contraction. Adrenaline also has bronchodilatory effects.

Amiodarone is another drug used in cardiac arrest situations. It blocks voltage-gated potassium channels, which prolongs repolarization and reduces myocardial excitability. The initial dose of amiodarone is 300 mg intravenously after 3 shocks, followed by a dose of 150 mg after 5 shocks.

Lidocaine is an alternative to amiodarone in cardiac arrest situations. It works by blocking sodium channels and decreasing heart rate. The recommended dose is 1 mg/kg by slow intravenous injection, with a repeat half of the initial dose after 5 minutes. The maximum total dose of lidocaine is 3 mg/kg.

Magnesium sulfate is used to reverse myocardial hyperexcitability associated with hypomagnesemia. It is administered intravenously at a dose of 2 g over 10-15 minutes. An additional dose may be given if necessary, but the maximum total dose should not exceed 3 g.

Atropine is an antagonist of muscarinic acetylcholine receptors and is used to counteract the slowing of heart rate caused by the parasympathetic nervous system. It is administered intravenously at a dose of 500 mcg every 3-5 minutes, with a maximum dose of 3 mg.

Naloxone is a competitive antagonist for opioid receptors and is used in cases of respiratory arrest caused by opioid overdose. It has a short duration of action, so careful monitoring is necessary. The initial dose of naloxone is 400 micrograms, followed by 800 mcg after 1 minute. The dose can be gradually escalated up to 2 mg per dose if there is no response to the preceding dose.

It is important for healthcare professionals to have knowledge of the pharmacology and dosing schedules of these drugs in order to effectively manage respiratory and cardiac arrest situations.

The four essential elements for effective procedural sedation are analgesia, anxiolysis, sedation, and amnesia. According to the Royal College of Emergency Medicine (RCEM), it is important to prioritize pain management before sedation, using appropriate analgesics based on the patient’s pain level. Non-pharmacological methods should be considered to reduce anxiety, such as creating a comfortable environment and involving supportive family members. The level of sedation required should be determined in advance, with most procedures in the emergency department requiring moderate to deep sedation. Lastly, providing a degree of amnesia will help minimize any unpleasant memories associated with the procedure.

Further Reading:

Procedural sedation is commonly used by emergency department (ED) doctors to minimize pain and discomfort during procedures that may be painful or distressing for patients. Effective procedural sedation requires the administration of analgesia, anxiolysis, sedation, and amnesia. This is typically achieved through the use of a combination of short-acting analgesics and sedatives.

There are different levels of sedation, ranging from minimal sedation (anxiolysis) to general anesthesia. It is important for clinicians to understand the level of sedation being used and to be able to manage any unintended deeper levels of sedation that may occur. Deeper levels of sedation are similar to general anesthesia and require the same level of care and monitoring.

Various drugs can be used for procedural sedation, including propofol, midazolam, ketamine, and fentanyl. Each of these drugs has its own mechanism of action and side effects. Propofol is commonly used for sedation, amnesia, and induction and maintenance of general anesthesia. Midazolam is a benzodiazepine that enhances the effect of GABA on the GABA A receptors. Ketamine is an NMDA receptor antagonist and is used for dissociative sedation. Fentanyl is a highly potent opioid used for analgesia and sedation.

The doses of these drugs for procedural sedation in the ED vary depending on the drug and the route of administration. It is important for clinicians to be familiar with the appropriate doses and onset and peak effect times for each drug.

Safe sedation requires certain requirements, including appropriate staffing levels, competencies of the sedating practitioner, location and facilities, and monitoring. The level of sedation being used determines the specific requirements for safe sedation.

After the procedure, patients should be monitored until they meet the criteria for safe discharge. This includes returning to their baseline level of consciousness, having vital signs within normal limits, and not experiencing compromised respiratory status. Pain and discomfort should also be addressed before discharge.

The tracheal opening can be classified using the Cormack-Lehane grading system. This system categorizes the views obtained through direct laryngoscopy based on the structures that are visible. More information about this classification system can be found in the notes provided below.

Further Reading:

A difficult airway refers to a situation where factors have been identified that make airway management more challenging. These factors can include body habitus, head and neck anatomy, mouth characteristics, jaw abnormalities, and neck mobility. The LEMON criteria can be used to predict difficult intubation by assessing these factors. The criteria include looking externally at these factors, evaluating the 3-3-2 rule which assesses the space in the mouth and neck, assessing the Mallampati score which measures the distance between the tongue base and roof of the mouth, and considering any upper airway obstructions or reduced neck mobility.

Direct laryngoscopy is a method used to visualize the larynx and assess the size of the tracheal opening. The Cormack-Lehane grading system can be used to classify the tracheal opening, with higher grades indicating more difficult access. In cases of a failed airway, where intubation attempts are unsuccessful and oxygenation cannot be maintained, the immediate priority is to oxygenate the patient and prevent hypoxic brain injury. This can be done through various measures such as using a bag-valve-mask ventilation, high flow oxygen, suctioning, and optimizing head positioning.

If oxygenation cannot be maintained, it is important to call for help from senior medical professionals and obtain a difficult airway trolley if not already available. If basic airway management techniques do not improve oxygenation, further intubation attempts may be considered using different equipment or techniques. If oxygen saturations remain below 90%, a surgical airway such as a cricothyroidotomy may be necessary.

Post-intubation hypoxia can occur for various reasons, and the mnemonic DOPES can be used to identify and address potential problems. DOPES stands for displacement of the endotracheal tube, obstruction, pneumothorax, equipment failure, and stacked breaths. If intubation attempts fail, a maximum of three attempts should be made before moving to an alternative plan, such as using a laryngeal mask airway or considering a cricothyroidotomy.

Suxamethonium, also called succinylcholine, is a type of drug used to block neuromuscular transmission. It acts as an agonist by binding to acetylcholine receptors at the neuromuscular junction. Unlike acetylcholine, suxamethonium is not broken down by acetylcholinesterase, which means it stays bound to the receptors for a longer time, leading to prolonged inhibition of neuromuscular transmission. Eventually, suxamethonium is metabolized by plasma cholinesterase.

Further Reading:

Rapid sequence induction (RSI) is a method used to place an endotracheal tube (ETT) in the trachea while minimizing the risk of aspiration. It involves inducing loss of consciousness while applying cricoid pressure, followed by intubation without face mask ventilation. The steps of RSI can be remembered using the 7 P’s: preparation, pre-oxygenation, pre-treatment, paralysis and induction, protection and positioning, placement with proof, and post-intubation management.

Preparation involves preparing the patient, equipment, team, and anticipating any difficulties that may arise during the procedure. Pre-oxygenation is important to ensure the patient has an adequate oxygen reserve and prolongs the time before desaturation. This is typically done by breathing 100% oxygen for 3 minutes. Pre-treatment involves administering drugs to counter expected side effects of the procedure and anesthesia agents used.

Paralysis and induction involve administering a rapid-acting induction agent followed by a neuromuscular blocking agent. Commonly used induction agents include propofol, ketamine, thiopentone, and etomidate. The neuromuscular blocking agents can be depolarizing (such as suxamethonium) or non-depolarizing (such as rocuronium). Depolarizing agents bind to acetylcholine receptors and generate an action potential, while non-depolarizing agents act as competitive antagonists.

Protection and positioning involve applying cricoid pressure to prevent regurgitation of gastric contents and positioning the patient’s neck appropriately. Tube placement is confirmed by visualizing the tube passing between the vocal cords, auscultation of the chest and stomach, end-tidal CO2 measurement, and visualizing misting of the tube. Post-intubation management includes standard care such as monitoring ECG, SpO2, NIBP, capnography, and maintaining sedation and neuromuscular blockade.

Overall, RSI is a technique used to quickly and safely secure the airway in patients who may be at risk of aspiration. It involves a series of steps to ensure proper preparation, oxygenation, drug administration, and tube placement. Monitoring and post-intubation care are also important aspects of RSI.