Ondansetron is a medication that works by blocking serotonin receptors in the body. It is commonly used as a first-line treatment for postoperative nausea and vomiting (PONV), which can occur after procedures done under sedation or anesthesia.

Further Reading:

postoperative nausea and vomiting (PONV) is a common occurrence following procedures performed under sedation or anesthesia. It can be highly distressing for patients. Several risk factors have been identified for PONV, including female gender, a history of PONV or motion sickness, non-smoking status, patient age, use of volatile anesthetics, longer duration of anesthesia, perioperative opioid use, use of nitrous oxide, and certain types of surgery such as abdominal and gynecological procedures.

To manage PONV, antiemetics are commonly used. These medications work by targeting different receptors in the body. Cyclizine and promethazine are histamine H1-receptor antagonists, which block the action of histamine and help reduce nausea and vomiting. Ondansetron is a serotonin 5-HT3 receptor antagonist, which blocks the action of serotonin and is effective in preventing and treating PONV. Prochlorperazine is a dopamine D2 receptor antagonist, which blocks the action of dopamine and helps alleviate symptoms of nausea and vomiting. Metoclopramide is also a dopamine D2 receptor antagonist and a 5-HT3 receptor antagonist, providing dual action against PONV. It is also a 5-HT4 receptor agonist, which helps improve gastric emptying and reduces the risk of PONV.

Assessment and management of PONV involves a comprehensive approach. Healthcare professionals need to assess the patient’s risk factors for PONV and take appropriate measures to prevent its occurrence. This may include selecting the appropriate anesthesia technique, using antiemetics prophylactically, and providing adequate pain control. In cases where PONV does occur, prompt treatment with antiemetics should be initiated to alleviate symptoms and provide relief to the patient. Close monitoring of the patient’s condition and response to treatment is essential to ensure effective management of PONV.

Atropine acts as a blocker for muscarinic acetylcholine receptors, making it an antagonist. It is commonly administered during peri-arrest bradycardia. In adults, a dose of 500 mcg is given every 3-5 minutes, with a maximum total dose of 3mg. On the other hand, the initial intravenous dose of amiodarone is 300 mg. Amiodarone works by prolonging repolarization and decreasing myocardial excitability. Additionally, lidocaine functions by blocking sodium channels.

Further Reading:

In the management of respiratory and cardiac arrest, several drugs are commonly used to help restore normal function and improve outcomes. Adrenaline is a non-selective agonist of adrenergic receptors and is administered intravenously at a dose of 1 mg every 3-5 minutes. It works by causing vasoconstriction, increasing systemic vascular resistance (SVR), and improving cardiac output by increasing the force of heart contraction. Adrenaline also has bronchodilatory effects.

Amiodarone is another drug used in cardiac arrest situations. It blocks voltage-gated potassium channels, which prolongs repolarization and reduces myocardial excitability. The initial dose of amiodarone is 300 mg intravenously after 3 shocks, followed by a dose of 150 mg after 5 shocks.

Lidocaine is an alternative to amiodarone in cardiac arrest situations. It works by blocking sodium channels and decreasing heart rate. The recommended dose is 1 mg/kg by slow intravenous injection, with a repeat half of the initial dose after 5 minutes. The maximum total dose of lidocaine is 3 mg/kg.

Magnesium sulfate is used to reverse myocardial hyperexcitability associated with hypomagnesemia. It is administered intravenously at a dose of 2 g over 10-15 minutes. An additional dose may be given if necessary, but the maximum total dose should not exceed 3 g.

Atropine is an antagonist of muscarinic acetylcholine receptors and is used to counteract the slowing of heart rate caused by the parasympathetic nervous system. It is administered intravenously at a dose of 500 mcg every 3-5 minutes, with a maximum dose of 3 mg.

Naloxone is a competitive antagonist for opioid receptors and is used in cases of respiratory arrest caused by opioid overdose. It has a short duration of action, so careful monitoring is necessary. The initial dose of naloxone is 400 micrograms, followed by 800 mcg after 1 minute. The dose can be gradually escalated up to 2 mg per dose if there is no response to the preceding dose.

It is important for healthcare professionals to have knowledge of the pharmacology and dosing schedules of these drugs in order to effectively manage respiratory and cardiac arrest situations.

During Bier’s block, the cuff is inflated to a pressure that is 100 mmHg higher than the patient’s systolic blood pressure. For example, if the systolic blood pressure is 150 mmHg, the cuff would be inflated to 250 mmHg. It is important to note that Bier’s block should not be performed if the systolic blood pressure is greater than 200 mmHg, as this is considered a contraindication. Therefore, the maximum pressure ever used during Bier’s block is 300mmHg.

Further Reading:

Bier’s block is a regional intravenous anesthesia technique commonly used for minor surgical procedures of the forearm or for reducing distal radius fractures in the emergency department (ED). It is recommended by NICE as the preferred anesthesia block for adults requiring manipulation of distal forearm fractures in the ED.

Before performing the procedure, a pre-procedure checklist should be completed, including obtaining consent, recording the patient’s weight, ensuring the resuscitative equipment is available, and monitoring the patient’s vital signs throughout the procedure. The air cylinder should be checked if not using an electronic machine, and the cuff should be checked for leaks.

During the procedure, a double cuff tourniquet is placed on the upper arm, and the arm is elevated to exsanguinate the limb. The proximal cuff is inflated to a pressure 100 mmHg above the systolic blood pressure, up to a maximum of 300 mmHg. The time of inflation and pressure should be recorded, and the absence of the radial pulse should be confirmed. 0.5% plain prilocaine is then injected slowly, and the time of injection is recorded. The patient should be warned about the potential cold/hot sensation and mottled appearance of the arm. After injection, the cannula is removed and pressure is applied to the venipuncture site to prevent bleeding. After approximately 10 minutes, the patient should have anesthesia and should not feel pain during manipulation. If anesthesia is successful, the manipulation can be performed, and a plaster can be applied by a second staff member. A check x-ray should be obtained with the arm lowered onto a pillow. The tourniquet should be monitored at all times, and the cuff should be inflated for a minimum of 20 minutes and a maximum of 45 minutes. If rotation of the cuff is required, it should be done after the manipulation and plaster application. After the post-reduction x-ray is satisfactory, the cuff can be deflated while observing the patient and monitors. Limb circulation should be checked prior to discharge, and appropriate follow-up and analgesia should be arranged.

There are several contraindications to performing Bier’s block, including allergy to local anesthetic, hypertension over 200 mm Hg, infection in the limb, lymphedema, methemoglobinemia, morbid obesity, peripheral vascular disease, procedures needed in both arms, Raynaud’s phenomenon, scleroderma, severe hypertension and sickle cell disease.

Lidocaine functions by inhibiting the activity of voltage-gated sodium channels, preventing the flow of sodium ions through these channels.

Further Reading:

In the management of respiratory and cardiac arrest, several drugs are commonly used to help restore normal function and improve outcomes. Adrenaline is a non-selective agonist of adrenergic receptors and is administered intravenously at a dose of 1 mg every 3-5 minutes. It works by causing vasoconstriction, increasing systemic vascular resistance (SVR), and improving cardiac output by increasing the force of heart contraction. Adrenaline also has bronchodilatory effects.

Amiodarone is another drug used in cardiac arrest situations. It blocks voltage-gated potassium channels, which prolongs repolarization and reduces myocardial excitability. The initial dose of amiodarone is 300 mg intravenously after 3 shocks, followed by a dose of 150 mg after 5 shocks.

Lidocaine is an alternative to amiodarone in cardiac arrest situations. It works by blocking sodium channels and decreasing heart rate. The recommended dose is 1 mg/kg by slow intravenous injection, with a repeat half of the initial dose after 5 minutes. The maximum total dose of lidocaine is 3 mg/kg.

Magnesium sulfate is used to reverse myocardial hyperexcitability associated with hypomagnesemia. It is administered intravenously at a dose of 2 g over 10-15 minutes. An additional dose may be given if necessary, but the maximum total dose should not exceed 3 g.

Atropine is an antagonist of muscarinic acetylcholine receptors and is used to counteract the slowing of heart rate caused by the parasympathetic nervous system. It is administered intravenously at a dose of 500 mcg every 3-5 minutes, with a maximum dose of 3 mg.

Naloxone is a competitive antagonist for opioid receptors and is used in cases of respiratory arrest caused by opioid overdose. It has a short duration of action, so careful monitoring is necessary. The initial dose of naloxone is 400 micrograms, followed by 800 mcg after 1 minute. The dose can be gradually escalated up to 2 mg per dose if there is no response to the preceding dose.

It is important for healthcare professionals to have knowledge of the pharmacology and dosing schedules of these drugs in order to effectively manage respiratory and cardiac arrest situations.

The Mallampati score is a measure that assesses the distance between the base of the tongue and the roof of the mouth. This score is used to classify the level of airway obstruction during certain medical procedures. Please refer to the notes below for the complete classification.

Further Reading:

A difficult airway refers to a situation where factors have been identified that make airway management more challenging. These factors can include body habitus, head and neck anatomy, mouth characteristics, jaw abnormalities, and neck mobility. The LEMON criteria can be used to predict difficult intubation by assessing these factors. The criteria include looking externally at these factors, evaluating the 3-3-2 rule which assesses the space in the mouth and neck, assessing the Mallampati score which measures the distance between the tongue base and roof of the mouth, and considering any upper airway obstructions or reduced neck mobility.

Direct laryngoscopy is a method used to visualize the larynx and assess the size of the tracheal opening. The Cormack-Lehane grading system can be used to classify the tracheal opening, with higher grades indicating more difficult access. In cases of a failed airway, where intubation attempts are unsuccessful and oxygenation cannot be maintained, the immediate priority is to oxygenate the patient and prevent hypoxic brain injury. This can be done through various measures such as using a bag-valve-mask ventilation, high flow oxygen, suctioning, and optimizing head positioning.

If oxygenation cannot be maintained, it is important to call for help from senior medical professionals and obtain a difficult airway trolley if not already available. If basic airway management techniques do not improve oxygenation, further intubation attempts may be considered using different equipment or techniques. If oxygen saturations remain below 90%, a surgical airway such as a cricothyroidotomy may be necessary.

Post-intubation hypoxia can occur for various reasons, and the mnemonic DOPES can be used to identify and address potential problems. DOPES stands for displacement of the endotracheal tube, obstruction, pneumothorax, equipment failure, and stacked breaths. If intubation attempts fail, a maximum of three attempts should be made before moving to an alternative plan, such as using a laryngeal mask airway or considering a cricothyroidotomy.

During pre-oxygenation, inspired Oxygen primarily works by removing Nitrogen and increasing the presence of Oxygen. Additionally, it helps to optimize the levels of oxygen in the alveolar, arterial, tissue, and venous areas.

Further Reading:

Rapid sequence induction (RSI) is a method used to place an endotracheal tube (ETT) in the trachea while minimizing the risk of aspiration. It involves inducing loss of consciousness while applying cricoid pressure, followed by intubation without face mask ventilation. The steps of RSI can be remembered using the 7 P’s: preparation, pre-oxygenation, pre-treatment, paralysis and induction, protection and positioning, placement with proof, and post-intubation management.

Preparation involves preparing the patient, equipment, team, and anticipating any difficulties that may arise during the procedure. Pre-oxygenation is important to ensure the patient has an adequate oxygen reserve and prolongs the time before desaturation. This is typically done by breathing 100% oxygen for 3 minutes. Pre-treatment involves administering drugs to counter expected side effects of the procedure and anesthesia agents used.

Paralysis and induction involve administering a rapid-acting induction agent followed by a neuromuscular blocking agent. Commonly used induction agents include propofol, ketamine, thiopentone, and etomidate. The neuromuscular blocking agents can be depolarizing (such as suxamethonium) or non-depolarizing (such as rocuronium). Depolarizing agents bind to acetylcholine receptors and generate an action potential, while non-depolarizing agents act as competitive antagonists.

Protection and positioning involve applying cricoid pressure to prevent regurgitation of gastric contents and positioning the patient’s neck appropriately. Tube placement is confirmed by visualizing the tube passing between the vocal cords, auscultation of the chest and stomach, end-tidal CO2 measurement, and visualizing misting of the tube. Post-intubation management includes standard care such as monitoring ECG, SpO2, NIBP, capnography, and maintaining sedation and neuromuscular blockade.

Overall, RSI is a technique used to quickly and safely secure the airway in patients who may be at risk of aspiration. It involves a series of steps to ensure proper preparation, oxygenation, drug administration, and tube placement. Monitoring and post-intubation care are also important aspects of RSI.

Etomidate is not recommended for use in septic patients because it can suppress adrenal cortisol production, leading to increased morbidity and mortality in sepsis cases. However, it is a suitable choice for haemodynamically unstable patients who are not experiencing sepsis, as it does not cause significant hypotension like other induction agents. Additionally, etomidate can be beneficial for patients with head injuries and elevated intracranial pressure, as it reduces cerebral blood flow and intracranial pressure.

Further Reading:

There are four commonly used induction agents in the UK: propofol, ketamine, thiopentone, and etomidate.

Propofol is a 1% solution that produces significant venodilation and myocardial depression. It can also reduce cerebral perfusion pressure. The typical dose for propofol is 1.5-2.5 mg/kg. However, it can cause side effects such as hypotension, respiratory depression, and pain at the site of injection.

Ketamine is another induction agent that produces a dissociative state. It does not display a dose-response continuum, meaning that the effects do not necessarily increase with higher doses. Ketamine can cause bronchodilation, which is useful in patients with asthma. The initial dose for ketamine is 0.5-2 mg/kg, with a typical IV dose of 1.5 mg/kg. Side effects of ketamine include tachycardia, hypertension, laryngospasm, unpleasant hallucinations, nausea and vomiting, hypersalivation, increased intracranial and intraocular pressure, nystagmus and diplopia, abnormal movements, and skin reactions.

Thiopentone is an ultra-short acting barbiturate that acts on the GABA receptor complex. It decreases cerebral metabolic oxygen and reduces cerebral blood flow and intracranial pressure. The adult dose for thiopentone is 3-5 mg/kg, while the child dose is 5-8 mg/kg. However, these doses should be halved in patients with hypovolemia. Side effects of thiopentone include venodilation, myocardial depression, and hypotension. It is contraindicated in patients with acute porphyrias and myotonic dystrophy.

Etomidate is the most haemodynamically stable induction agent and is useful in patients with hypovolemia, anaphylaxis, and asthma. It has similar cerebral effects to thiopentone. The dose for etomidate is 0.15-0.3 mg/kg. Side effects of etomidate include injection site pain, movement disorders, adrenal insufficiency, and apnoea. It is contraindicated in patients with sepsis due to adrenal suppression.

Thiopental sodium is a barbiturate with a very short duration of action. It is primarily used to induce anesthesia. Barbiturates are believed to primarily affect synapses by reducing the sensitivity of postsynaptic receptors to neurotransmitters and by interfering with the release of neurotransmitters from presynaptic neurons.

Thiopental sodium specifically binds to a unique site associated with a chloride ionophore at the GABAA receptor, which is responsible for the opening of chloride ion channels. This binding increases the length of time that the chloride ionophore remains open. As a result, the inhibitory effect of GABA on postsynaptic neurons in the thalamus is prolonged.

In summary, thiopental sodium acts as a short-acting barbiturate that is commonly used to induce anesthesia. It affects synapses by reducing postsynaptic receptor sensitivity and interfering with neurotransmitter release. By binding to a specific site at the GABAA receptor, thiopental sodium prolongs the inhibitory effect of GABA in the thalamus.

Thiopental sodium is a barbiturate with a very short duration of action. It is primarily used to induce anesthesia. Barbiturates are believed to primarily affect synapses by reducing the sensitivity of postsynaptic receptors to neurotransmitters and by interfering with the release of neurotransmitters from presynaptic neurons.

Thiopental sodium specifically binds to a unique site associated with a chloride ionophore at the GABAA receptor, which is responsible for the opening of chloride ion channels. This binding increases the length of time that the chloride ionophore remains open. As a result, the inhibitory effect of GABA on postsynaptic neurons in the thalamus is prolonged.

In summary, thiopental sodium acts as a short-acting barbiturate that is commonly used to induce anesthesia. It affects synapses by reducing postsynaptic receptor sensitivity and interfering with neurotransmitter release. By binding to a specific site at the GABAA receptor, thiopental sodium prolongs the inhibitory effect of GABA in the thalamus.

Etomidate is a derivative of imidazole that is commonly used to induce anesthesia due to its short-acting nature. Its main mechanism of action is believed to involve the modulation of fast inhibitory synaptic transmission within the central nervous system by acting on GABA type A receptors.