The equation used to calculate systemic vascular resistance is SVR = MAP / CO. For example, if the mean arterial pressure (MAP) is 140 mmHg and the cardiac output (CO) is 4 mL/min, then the SVR would be 35 mmHg⋅min⋅mL-1. Although the theoretical equation for SVR is more complex, it is often simplified by assuming that central venous pressure (CVP) is negligible. However, in reality, MAP is typically measured directly or indirectly using arterial pressure measurements. The equation for calculating MAP at rest is MAP = diastolic pressure + 1/3(pulse pressure), where pulse pressure is calculated as systolic pressure minus diastolic pressure.

Cardiovascular physiology involves the study of the functions and processes of the heart and blood vessels. One important measure of heart function is the left ventricular ejection fraction, which is calculated by dividing the stroke volume (the amount of blood pumped out of the left ventricle with each heartbeat) by the end diastolic LV volume (the amount of blood in the left ventricle at the end of diastole) and multiplying by 100%. Another key measure is cardiac output, which is the amount of blood pumped by the heart per minute and is calculated by multiplying stroke volume by heart rate.

Pulse pressure is another important measure of cardiovascular function, which is the difference between systolic pressure (the highest pressure in the arteries during a heartbeat) and diastolic pressure (the lowest pressure in the arteries between heartbeats). Factors that can increase pulse pressure include a less compliant aorta (which can occur with age) and increased stroke volume.

Finally, systemic vascular resistance is a measure of the resistance to blood flow in the systemic circulation and is calculated by dividing mean arterial pressure (the average pressure in the arteries during a heartbeat) by cardiac output. Understanding these measures of cardiovascular function is important for diagnosing and treating cardiovascular diseases.

The release of nitric oxide caused by nitrates can lead to a decrease in intracellular calcium. This occurs when nitric oxide activates guanylate cyclase, which converts GDP to cGMP. The resulting decrease in intracellular calcium within smooth muscle cells causes vasodilation and can result in hypotension as a side effect. Additionally, flushing may occur as a result of the vasodilation caused by decreased intracellular calcium. It is important to note that nitrates do not affect intracellular potassium or sodium, and do not cause an increase in intracellular calcium, which would lead to smooth muscle contraction and an increase in blood pressure.

Understanding Nitrates and Their Effects on the Body

Nitrates are a type of medication that can cause blood vessels to widen, which is known as vasodilation. They are commonly used to manage angina and treat heart failure. One of the most frequently prescribed nitrates is sublingual glyceryl trinitrate, which is used to relieve angina attacks in patients with ischaemic heart disease.

The mechanism of action for nitrates involves the release of nitric oxide in smooth muscle, which activates guanylate cyclase. This enzyme then converts GTP to cGMP, leading to a decrease in intracellular calcium levels. In the case of angina, nitrates dilate the coronary arteries and reduce venous return, which decreases left ventricular work and reduces myocardial oxygen demand.

However, nitrates can also cause side effects such as hypotension, tachycardia, headaches, and flushing. Additionally, many patients who take nitrates develop tolerance over time, which can reduce their effectiveness. To combat this, the British National Formulary recommends that patients who develop tolerance take the second dose of isosorbide mononitrate after 8 hours instead of 12 hours. This allows blood-nitrate levels to fall for 4 hours and maintains effectiveness. It’s important to note that this effect is not seen in patients who take modified release isosorbide mononitrate.

Furosemide is a medication that is often prescribed to patients with heart failure who have excess fluid in their bodies. It works by inhibiting the Na-K-Cl cotransporter in the thick ascending limb of the loop of Henle, which prevents the reabsorption of sodium. This results in a less hypertonic renal medulla and reduces the osmotic force that causes water to be reabsorbed from the collecting ducts. As a result, more water is excreted through the kidneys.

It is important to be aware of the common side effects of loop diuretics, which are listed in the notes below.

Loop Diuretics: Mechanism of Action and Clinical Applications

Loop diuretics, such as furosemide and bumetanide, are medications that inhibit the Na-K-Cl cotransporter (NKCC) in the thick ascending limb of the loop of Henle. By doing so, they reduce the absorption of NaCl, resulting in increased urine output. Loop diuretics act on NKCC2, which is more prevalent in the kidneys. These medications work on the apical membrane and must first be filtered into the tubules by the glomerulus before they can have an effect. Patients with poor renal function may require higher doses to ensure sufficient concentration in the tubules.

Loop diuretics are commonly used in the treatment of heart failure, both acutely (usually intravenously) and chronically (usually orally). They are also indicated for resistant hypertension, particularly in patients with renal impairment. However, loop diuretics can cause adverse effects such as hypotension, hyponatremia, hypokalemia, hypomagnesemia, hypochloremic alkalosis, ototoxicity, hypocalcemia, renal impairment, hyperglycemia (less common than with thiazides), and gout. Therefore, careful monitoring of electrolyte levels and renal function is necessary when using loop diuretics.

The observed ECG alterations are indicative of an ischemic injury in the lower region of the heart. The ST depressions in leads I and aVL, which are located in the lateral wall, are common reciprocal changes that occur during an inferior myocardial infarction. Typically, the right coronary artery is the most probable site of damage in cases involving lesions in the lower wall.

Understanding Acute Coronary Syndrome

Acute coronary syndrome (ACS) is a term used to describe various acute presentations of ischaemic heart disease. It includes ST elevation myocardial infarction (STEMI), non-ST elevation myocardial infarction (NSTEMI), and unstable angina. ACS usually develops in patients with ischaemic heart disease, which is the gradual build-up of fatty plaques in the walls of the coronary arteries. This can lead to a gradual narrowing of the arteries, resulting in less blood and oxygen reaching the myocardium, causing angina. It can also lead to sudden plaque rupture, resulting in a complete occlusion of the artery and no blood or oxygen reaching the area of myocardium, causing a myocardial infarction.

There are many factors that can increase the chance of a patient developing ischaemic heart disease, including unmodifiable risk factors such as increasing age, male gender, and family history, and modifiable risk factors such as smoking, diabetes mellitus, hypertension, hypercholesterolaemia, and obesity.

The classic and most common symptom of ACS is chest pain, which is typically central or left-sided and may radiate to the jaw or left arm. Other symptoms include dyspnoea, sweating, and nausea and vomiting. Patients presenting with ACS often have very few physical signs, and the two most important investigations when assessing a patient with chest pain are an electrocardiogram (ECG) and cardiac markers such as troponin.

Once a diagnosis of ACS has been made, treatment involves preventing worsening of the presentation, revascularising the vessel if occluded, and treating pain. For patients who’ve had a STEMI, the priority of management is to reopen the blocked vessel. For patients who’ve had an NSTEMI, a risk stratification tool is used to decide upon further management. Patients who’ve had an ACS require lifelong drug therapy to help reduce the risk of a further event, which includes aspirin, a second antiplatelet if appropriate, a beta-blocker, an ACE inhibitor, and a statin.

Ramipril is the correct medication for this patient with likely chronic heart failure. It is one of the few drugs that has been shown to improve the overall prognosis of heart failure, along with beta-blockers and aldosterone antagonists. Aspirin, digoxin, and furosemide are commonly used in the management of heart failure but do not offer prognostic benefit.

Chronic heart failure can be managed through drug treatment, according to updated guidelines issued by NICE in 2018. While loop diuretics are useful in managing fluid overload, they do not reduce mortality in the long term. The first-line treatment for all patients is a combination of an ACE-inhibitor and a beta-blocker, with clinical judgement used to determine which one to start first. Aldosterone antagonists are recommended as second-line treatment, but potassium levels should be monitored as both ACE inhibitors and aldosterone antagonists can cause hyperkalaemia. Third-line treatment should be initiated by a specialist and may include ivabradine, sacubitril-valsartan, hydralazine in combination with nitrate, digoxin, and cardiac resynchronisation therapy. Other treatments include annual influenzae and one-off pneumococcal vaccines. Those with asplenia, splenic dysfunction, or chronic kidney disease may require a booster every 5 years.

The vertebral artery does not travel through the intervertebral foramen, but instead passes through the foramina found in the transverse processes of the cervical vertebrae.

Anatomy of the Vertebral Artery

The vertebral artery is a branch of the subclavian artery and can be divided into four parts. The first part runs to the foramen in the transverse process of C6 and is located anterior to the vertebral and internal jugular veins. On the left side, the thoracic duct is also an anterior relation. The second part runs through the foramina of the transverse processes of the upper six cervical vertebrae and is accompanied by a venous plexus and the inferior cervical sympathetic ganglion. The third part runs posteromedially on the lateral mass of the atlas and enters the sub occipital triangle. It then passes anterior to the edge of the posterior atlanto-occipital membrane to enter the vertebral canal. The fourth part passes through the spinal dura and arachnoid, running superiorly and anteriorly at the lateral aspect of the medulla oblongata. At the lower border of the pons, it unites to form the basilar artery.

The anatomy of the vertebral artery is important to understand as it plays a crucial role in supplying blood to the brainstem and cerebellum. Any damage or blockage to this artery can lead to serious neurological complications. Therefore, it is essential for healthcare professionals to have a thorough understanding of the anatomy and function of the vertebral artery.

Ranolazine is a medication that works by inhibiting persistent or late sodium current in various voltage-gated sodium channels in heart muscle. This results in a decrease in intracellular calcium levels, which in turn reduces tension in the heart muscle and lowers its oxygen demand.

Other medications used to treat angina include ivabradine, which inhibits funny channels, trimetazidine, which inhibits fatty acid metabolism, nitrates, which increase nitric oxide, and several drugs that reduce heart rate, such as beta blockers and calcium channel blockers.

It is important to note that ranolazine is not typically the first medication prescribed for angina. The drug management of angina may vary depending on the individual patient’s needs and medical history.

Angina pectoris can be managed through lifestyle changes, medication, percutaneous coronary intervention, and surgery. In 2011, NICE released guidelines for the management of stable angina. Medication is an important aspect of treatment, and all patients should receive aspirin and a statin unless there are contraindications. Sublingual glyceryl trinitrate can be used to abort angina attacks. NICE recommends using either a beta-blocker or a calcium channel blocker as first-line treatment, depending on the patient’s comorbidities, contraindications, and preferences. If a calcium channel blocker is used as monotherapy, a rate-limiting one such as verapamil or diltiazem should be used. If used in combination with a beta-blocker, a longer-acting dihydropyridine calcium channel blocker like amlodipine or modified-release nifedipine should be used. Beta-blockers should not be prescribed concurrently with verapamil due to the risk of complete heart block. If initial treatment is ineffective, medication should be increased to the maximum tolerated dose. If a patient is still symptomatic after monotherapy with a beta-blocker, a calcium channel blocker can be added, and vice versa. If a patient cannot tolerate the addition of a calcium channel blocker or a beta-blocker, long-acting nitrate, ivabradine, nicorandil, or ranolazine can be considered. If a patient is taking both a beta-blocker and a calcium-channel blocker, a third drug should only be added while awaiting assessment for PCI or CABG.

Nitrate tolerance is a common issue for patients who take nitrates, leading to reduced efficacy. NICE advises patients who take standard-release isosorbide mononitrate to use an asymmetric dosing interval to maintain a daily nitrate-free time of 10-14 hours to minimize the development of nitrate tolerance. However, this effect is not seen in patients who take once-daily modified-release isosorbide mononitrate.

In the first 24 hours after a myocardial infarction (MI), histology findings show early coagulative necrosis, neutrophils, wavy fibers, and hypercontraction of myofibrils. This stage carries a high risk of ventricular arrhythmia, heart failure, and cardiogenic shock.

Between 1 and 3 days post-MI, extensive coagulative necrosis and neutrophils are present, which can be associated with fibrinous pericarditis.

From 3 to 14 days post-MI, macrophages and granulation tissue appear at the margins. This stage carries a high risk of free wall rupture, papillary muscle rupture, and left ventricular pseudoaneurysm.

Between 2 weeks and several months post-MI, the contracted scar is complete. This stage is associated with Dressler syndrome, heart failure, arrhythmias, and mural thrombus.

Myocardial infarction (MI) can lead to various complications, which can occur immediately, early, or late after the event. Cardiac arrest is the most common cause of death following MI, usually due to ventricular fibrillation. Cardiogenic shock may occur if a large part of the ventricular myocardium is damaged, and it is difficult to treat. Chronic heart failure may result from ventricular myocardium dysfunction, which can be managed with loop diuretics, ACE-inhibitors, and beta-blockers. Tachyarrhythmias, such as ventricular fibrillation and ventricular tachycardia, are common complications. Bradyarrhythmias, such as atrioventricular block, are more common following inferior MI. Pericarditis is common in the first 48 hours after a transmural MI, while Dressler’s syndrome may occur 2-6 weeks later. Left ventricular aneurysm and free wall rupture, ventricular septal defect, and acute mitral regurgitation are other complications that may require urgent medical attention.

Hypokalaemia may be caused by thiazides

Thiazide diuretics can lead to hypokalaemia by stimulating aldosterone production and inhibiting the Na-Cl symporter. This inhibition results in more sodium being available to activate the Na/K-ATPase channel, leading to increased potassium loss in the urine and hypokalaemia.

Thiazide diuretics may also cause other side effects such as hypocalciuria, hypomagnesemia, and hyperlipidemia. The other options that describe the opposite of these disturbances are incorrect.

Thiazide diuretics are medications that work by blocking the thiazide-sensitive Na+-Cl− symporter, which inhibits sodium reabsorption at the beginning of the distal convoluted tubule (DCT). This results in the loss of potassium as more sodium reaches the collecting ducts. While thiazide diuretics are useful in treating mild heart failure, loop diuretics are more effective in reducing overload. Bendroflumethiazide was previously used to manage hypertension, but recent NICE guidelines recommend other thiazide-like diuretics such as indapamide and chlorthalidone.

Common side effects of thiazide diuretics include dehydration, postural hypotension, and electrolyte imbalances such as hyponatremia, hypokalemia, and hypercalcemia. Other potential adverse effects include gout, impaired glucose tolerance, and impotence. Rare side effects may include thrombocytopenia, agranulocytosis, photosensitivity rash, and pancreatitis.

It is worth noting that while thiazide diuretics may cause hypercalcemia, they can also reduce the incidence of renal stones by decreasing urinary calcium excretion. According to current NICE guidelines, the management of hypertension involves the use of thiazide-like diuretics, along with other medications and lifestyle changes, to achieve optimal blood pressure control and reduce the risk of cardiovascular disease.

Rapid depolarisation is caused by a rapid influx of sodium. This is due to the opening of fast Na+ channels during phase 0 of the cardiomyocyte action potential. Calcium influx during phase 2 causes a plateau, while chloride is not involved in the ventricular cardiomyocyte action potential. Potassium efflux occurs during repolarisation.

Understanding the Cardiac Action Potential and Conduction Velocity

The cardiac action potential is a series of electrical events that occur in the heart during each heartbeat. It is responsible for the contraction of the heart muscle and the pumping of blood throughout the body. The action potential is divided into five phases, each with a specific mechanism. The first phase is rapid depolarization, which is caused by the influx of sodium ions. The second phase is early repolarization, which is caused by the efflux of potassium ions. The third phase is the plateau phase, which is caused by the slow influx of calcium ions. The fourth phase is final repolarization, which is caused by the efflux of potassium ions. The final phase is the restoration of ionic concentrations, which is achieved by the Na+/K+ ATPase pump.

Conduction velocity is the speed at which the electrical signal travels through the heart. The speed varies depending on the location of the signal. Atrial conduction spreads along ordinary atrial myocardial fibers at a speed of 1 m/sec. AV node conduction is much slower, at 0.05 m/sec. Ventricular conduction is the fastest in the heart, achieved by the large diameter of the Purkinje fibers, which can achieve velocities of 2-4 m/sec. This allows for a rapid and coordinated contraction of the ventricles, which is essential for the proper functioning of the heart. Understanding the cardiac action potential and conduction velocity is crucial for diagnosing and treating heart conditions.