Nitrous oxide should not be used in cases where there is trapped air, such as pneumothorax. This is because nitrous oxide can diffuse into the trapped air and increase the pressure, which can be harmful. This can be particularly dangerous in conditions like pneumothorax, where the trapped air can expand and affect breathing, or in cases of intracranial air after a head injury, trapped air after a recent underwater dive, or recent injection of gas into the eye.

Further Reading:

Entonox® is a mixture of 50% nitrous oxide and 50% oxygen that can be used for self-administration to reduce anxiety. It can also be used alongside other anesthesia agents. However, its mechanism of action for anxiety reduction is not fully understood. The Entonox bottles are typically identified by blue and white color-coded collars, but a new standard will replace these with dark blue shoulders in the future. It is important to note that Entonox alone cannot be used as the sole maintenance agent in anesthesia.

One of the effects of nitrous oxide is the second-gas effect, where it speeds up the absorption of other inhaled anesthesia agents. Nitrous oxide enters the alveoli and diffuses into the blood, displacing nitrogen. This displacement causes the remaining alveolar gases to become more concentrated, increasing the fractional content of inhaled anesthesia gases and accelerating the uptake of volatile agents into the blood.

However, when nitrous oxide administration is stopped, it can cause diffusion hypoxia. Nitrous oxide exits the blood and diffuses back into the alveoli, while nitrogen diffuses in the opposite direction. Nitrous oxide enters the alveoli much faster than nitrogen leaves, resulting in the dilution of oxygen within the alveoli. This can lead to diffusion hypoxia, where the oxygen concentration in the alveoli is diluted, potentially causing oxygen deprivation in patients breathing air.

There are certain contraindications for using nitrous oxide, as it can expand in air-filled spaces. It should be avoided in conditions such as head injuries with intracranial air, pneumothorax, recent intraocular gas injection, and entrapped air following a recent underwater dive.

Trauma patients who require a definitively secured airway include those who are apnoeic, have a Glasgow Coma Scale score of less than 9, experience sustained seizure activity, have unstable midface trauma or airway injuries, have a large flail segment or respiratory failure, have a high risk of aspiration, or are unable to maintain an airway or oxygenation through other means.

To predict difficult intubations, the LEMON assessment can be utilized. The LEMON mnemonic provides a systematic approach to assess potential challenges in intubation. It stands for the following:

– Look externally: Examine for any characteristics that are known to cause difficult intubation or ventilation.
– Evaluate the 3-3-2 rule: Measure the incisor distance, hyoid/mental distance, and thyroid-to-mouth distance. If any of these measurements are less than the specified number of fingerbreadths, it may indicate a difficult intubation.
– Mallampati: Assess the Mallampati score, which is a classification system based on the visibility of certain structures in the mouth and throat. A score of 3 or higher suggests a difficult intubation.
– Obstruction: Check for the presence of any conditions that could potentially obstruct the airway.
– Neck mobility: Evaluate the mobility of the patient’s neck, as limited mobility may make intubation more challenging.

By utilizing the LEMON assessment, healthcare providers can identify potential difficulties in securing the airway and make appropriate interventions to ensure patient safety.

Suxamethonium, also called succinylcholine, is a type of drug used to block neuromuscular transmission. It acts as an agonist by binding to acetylcholine receptors at the neuromuscular junction. Unlike acetylcholine, suxamethonium is not broken down by acetylcholinesterase, which means it stays bound to the receptors for a longer time, leading to prolonged inhibition of neuromuscular transmission. Eventually, suxamethonium is metabolized by plasma cholinesterase.

Further Reading:

Rapid sequence induction (RSI) is a method used to place an endotracheal tube (ETT) in the trachea while minimizing the risk of aspiration. It involves inducing loss of consciousness while applying cricoid pressure, followed by intubation without face mask ventilation. The steps of RSI can be remembered using the 7 P’s: preparation, pre-oxygenation, pre-treatment, paralysis and induction, protection and positioning, placement with proof, and post-intubation management.

Preparation involves preparing the patient, equipment, team, and anticipating any difficulties that may arise during the procedure. Pre-oxygenation is important to ensure the patient has an adequate oxygen reserve and prolongs the time before desaturation. This is typically done by breathing 100% oxygen for 3 minutes. Pre-treatment involves administering drugs to counter expected side effects of the procedure and anesthesia agents used.

Paralysis and induction involve administering a rapid-acting induction agent followed by a neuromuscular blocking agent. Commonly used induction agents include propofol, ketamine, thiopentone, and etomidate. The neuromuscular blocking agents can be depolarizing (such as suxamethonium) or non-depolarizing (such as rocuronium). Depolarizing agents bind to acetylcholine receptors and generate an action potential, while non-depolarizing agents act as competitive antagonists.

Protection and positioning involve applying cricoid pressure to prevent regurgitation of gastric contents and positioning the patient’s neck appropriately. Tube placement is confirmed by visualizing the tube passing between the vocal cords, auscultation of the chest and stomach, end-tidal CO2 measurement, and visualizing misting of the tube. Post-intubation management includes standard care such as monitoring ECG, SpO2, NIBP, capnography, and maintaining sedation and neuromuscular blockade.

Overall, RSI is a technique used to quickly and safely secure the airway in patients who may be at risk of aspiration. It involves a series of steps to ensure proper preparation, oxygenation, drug administration, and tube placement. Monitoring and post-intubation care are also important aspects of RSI.

The size of an oropharyngeal airway (OPA or Guedel) can be determined by measuring the distance between the patient’s incisors and the angle of their mandible. To ensure proper fit, the OPA should be approximately the same length as this measurement. Please refer to the image in the notes for visual guidance.

Further Reading:

Techniques to keep the airway open:

1. Suction: Used to remove obstructing material such as blood, vomit, secretions, and food debris from the oral cavity.

2. Chin lift manoeuvres: Involves lifting the head off the floor and lifting the chin to extend the head in relation to the neck. Improves alignment of the pharyngeal, laryngeal, and oral axes.

3. Jaw thrust: Used in trauma patients with cervical spine injury concerns. Fingers are placed under the mandible and gently pushed upward.

Airway adjuncts:

1. Oropharyngeal airway (OPA): Prevents the tongue from occluding the airway. Sized according to the patient by measuring from the incisor teeth to the angle of the mandible. Inserted with the tip facing backwards and rotated 180 degrees once it touches the back of the palate or oropharynx.

2. Nasopharyngeal airway (NPA): Useful when it is difficult to open the mouth or in semi-conscious patients. Sized by length (distance between nostril and tragus of the ear) and diameter (roughly that of the patient’s little finger). Contraindicated in basal skull and midface fractures.

Laryngeal mask airway (LMA):

– Supraglottic airway device used as a first line or rescue airway.
– Easy to insert, sized according to patient’s bodyweight.
– Advantages: Easy insertion, effective ventilation, some protection from aspiration.
– Disadvantages: Risk of hypoventilation, greater gastric inflation than endotracheal tube (ETT), risk of aspiration and laryngospasm.

Note: Proper training and assessment of the patient’s condition are essential for airway management.

Entonox®, also known as ‘gas and air’ or ‘laughing gas’, is a combination of nitrous oxide and oxygen in equal proportions. It offers a mild sedative effect and helps reduce anxiety.

Further Reading:

Procedural sedation is commonly used by emergency department (ED) doctors to minimize pain and discomfort during procedures that may be painful or distressing for patients. Effective procedural sedation requires the administration of analgesia, anxiolysis, sedation, and amnesia. This is typically achieved through the use of a combination of short-acting analgesics and sedatives.

There are different levels of sedation, ranging from minimal sedation (anxiolysis) to general anesthesia. It is important for clinicians to understand the level of sedation being used and to be able to manage any unintended deeper levels of sedation that may occur. Deeper levels of sedation are similar to general anesthesia and require the same level of care and monitoring.

Various drugs can be used for procedural sedation, including propofol, midazolam, ketamine, and fentanyl. Each of these drugs has its own mechanism of action and side effects. Propofol is commonly used for sedation, amnesia, and induction and maintenance of general anesthesia. Midazolam is a benzodiazepine that enhances the effect of GABA on the GABA A receptors. Ketamine is an NMDA receptor antagonist and is used for dissociative sedation. Fentanyl is a highly potent opioid used for analgesia and sedation.

The doses of these drugs for procedural sedation in the ED vary depending on the drug and the route of administration. It is important for clinicians to be familiar with the appropriate doses and onset and peak effect times for each drug.

Safe sedation requires certain requirements, including appropriate staffing levels, competencies of the sedating practitioner, location and facilities, and monitoring. The level of sedation being used determines the specific requirements for safe sedation.

After the procedure, patients should be monitored until they meet the criteria for safe discharge. This includes returning to their baseline level of consciousness, having vital signs within normal limits, and not experiencing compromised respiratory status. Pain and discomfort should also be addressed before discharge.

It is crucial to continuously monitor the oxygen saturation, blood pressure, ECG, and temperature of critically ill patients during transfers. If the patient is intubated, monitoring of end-tidal CO2 is also necessary. The minimum standard monitoring requirements for any critically ill patient during transfers include ECG, oxygen saturation, blood pressure, and temperature. Additionally, if the patient is intubated, monitoring of end-tidal CO2 is mandatory. It is important to note that the guidance from ICS/FICM suggests that monitoring protocols for intra-hospital transfers should be similar to those for interhospital transfers.

Further Reading:

Transfer of critically ill patients in the emergency department is a common occurrence and can involve intra-hospital transfers or transfers to another hospital. However, there are several risks associated with these transfers that doctors need to be aware of and manage effectively.

Technical risks include equipment failure or inadequate equipment, unreliable power or oxygen supply, incompatible equipment, restricted positioning, and restricted monitoring equipment. These technical issues can hinder the ability to detect and treat problems with ventilation, blood pressure control, and arrhythmias during the transfer.

Non-technical risks involve limited personal and medical team during the transfer, isolation and lack of resources in the receiving hospital, and problems with communication and liaison between the origin and destination sites.

Organizational risks can be mitigated by having a dedicated consultant lead for transfers who is responsible for producing guidelines, training staff, standardizing protocols, equipment, and documentation, as well as capturing data and conducting audits.

To optimize the patient’s clinical condition before transfer, several key steps should be taken. These include ensuring a low threshold for intubation and anticipating airway and ventilation problems, securing the endotracheal tube (ETT) and verifying its position, calculating oxygen requirements and ensuring an adequate supply, monitoring for circulatory issues and inserting at least two IV accesses, providing ongoing analgesia and sedation, controlling seizures, and addressing any fractures or temperature changes.

It is also important to have the necessary equipment and personnel for the transfer. Standard monitoring equipment should include ECG, oxygen saturation, blood pressure, temperature, and capnographic monitoring for ventilated patients. Additional monitoring may be required depending on the level of care needed by the patient.

In terms of oxygen supply, it is standard practice to calculate the expected oxygen consumption during transfer and multiply it by two to ensure an additional supply in case of delays. The suggested oxygen supply for transfer can be calculated using the minute volume, fraction of inspired oxygen, and estimated transfer time.

Overall, managing the risks associated with patient transfers requires careful planning, communication, and coordination to ensure the safety and well-being of critically ill patients.

The BURP maneuver is a technique used to assist with intubation. It involves applying pressure in a specific direction on the larynx. The acronym BURP stands for backwards (B), upwards (U), rightwards (R), and pressure (P). To perform the maneuver correctly, the thyroid cartilage is moved backwards, 2 cm upwards, and 0.5cm – 2 cm to the right in relation to the anatomical position.

Further Reading:

A difficult airway refers to a situation where factors have been identified that make airway management more challenging. These factors can include body habitus, head and neck anatomy, mouth characteristics, jaw abnormalities, and neck mobility. The LEMON criteria can be used to predict difficult intubation by assessing these factors. The criteria include looking externally at these factors, evaluating the 3-3-2 rule which assesses the space in the mouth and neck, assessing the Mallampati score which measures the distance between the tongue base and roof of the mouth, and considering any upper airway obstructions or reduced neck mobility.

Direct laryngoscopy is a method used to visualize the larynx and assess the size of the tracheal opening. The Cormack-Lehane grading system can be used to classify the tracheal opening, with higher grades indicating more difficult access. In cases of a failed airway, where intubation attempts are unsuccessful and oxygenation cannot be maintained, the immediate priority is to oxygenate the patient and prevent hypoxic brain injury. This can be done through various measures such as using a bag-valve-mask ventilation, high flow oxygen, suctioning, and optimizing head positioning.

If oxygenation cannot be maintained, it is important to call for help from senior medical professionals and obtain a difficult airway trolley if not already available. If basic airway management techniques do not improve oxygenation, further intubation attempts may be considered using different equipment or techniques. If oxygen saturations remain below 90%, a surgical airway such as a cricothyroidotomy may be necessary.

Post-intubation hypoxia can occur for various reasons, and the mnemonic DOPES can be used to identify and address potential problems. DOPES stands for displacement of the endotracheal tube, obstruction, pneumothorax, equipment failure, and stacked breaths. If intubation attempts fail, a maximum of three attempts should be made before moving to an alternative plan, such as using a laryngeal mask airway or considering a cricothyroidotomy.

The appropriate dosage of suxamethonium for rapid sequence intubation (RSI) in adults is between 1 and 1.5 milligrams per kilogram of body weight.

Further Reading:

Rapid sequence induction (RSI) is a method used to place an endotracheal tube (ETT) in the trachea while minimizing the risk of aspiration. It involves inducing loss of consciousness while applying cricoid pressure, followed by intubation without face mask ventilation. The steps of RSI can be remembered using the 7 P’s: preparation, pre-oxygenation, pre-treatment, paralysis and induction, protection and positioning, placement with proof, and post-intubation management.

Preparation involves preparing the patient, equipment, team, and anticipating any difficulties that may arise during the procedure. Pre-oxygenation is important to ensure the patient has an adequate oxygen reserve and prolongs the time before desaturation. This is typically done by breathing 100% oxygen for 3 minutes. Pre-treatment involves administering drugs to counter expected side effects of the procedure and anesthesia agents used.

Paralysis and induction involve administering a rapid-acting induction agent followed by a neuromuscular blocking agent. Commonly used induction agents include propofol, ketamine, thiopentone, and etomidate. The neuromuscular blocking agents can be depolarizing (such as suxamethonium) or non-depolarizing (such as rocuronium). Depolarizing agents bind to acetylcholine receptors and generate an action potential, while non-depolarizing agents act as competitive antagonists.

Protection and positioning involve applying cricoid pressure to prevent regurgitation of gastric contents and positioning the patient’s neck appropriately. Tube placement is confirmed by visualizing the tube passing between the vocal cords, auscultation of the chest and stomach, end-tidal CO2 measurement, and visualizing misting of the tube. Post-intubation management includes standard care such as monitoring ECG, SpO2, NIBP, capnography, and maintaining sedation and neuromuscular blockade.

Overall, RSI is a technique used to quickly and safely secure the airway in patients who may be at risk of aspiration. It involves a series of steps to ensure proper preparation, oxygenation, drug administration, and tube placement. Monitoring and post-intubation care are also important aspects of RSI.

The blood gas measurement of pO2 should be equal to or greater than 18 kilopascals (kPa) at a level of 10.

Further Reading:

Rapid sequence induction (RSI) is a method used to place an endotracheal tube (ETT) in the trachea while minimizing the risk of aspiration. It involves inducing loss of consciousness while applying cricoid pressure, followed by intubation without face mask ventilation. The steps of RSI can be remembered using the 7 P’s: preparation, pre-oxygenation, pre-treatment, paralysis and induction, protection and positioning, placement with proof, and post-intubation management.

Preparation involves preparing the patient, equipment, team, and anticipating any difficulties that may arise during the procedure. Pre-oxygenation is important to ensure the patient has an adequate oxygen reserve and prolongs the time before desaturation. This is typically done by breathing 100% oxygen for 3 minutes. Pre-treatment involves administering drugs to counter expected side effects of the procedure and anesthesia agents used.

Paralysis and induction involve administering a rapid-acting induction agent followed by a neuromuscular blocking agent. Commonly used induction agents include propofol, ketamine, thiopentone, and etomidate. The neuromuscular blocking agents can be depolarizing (such as suxamethonium) or non-depolarizing (such as rocuronium). Depolarizing agents bind to acetylcholine receptors and generate an action potential, while non-depolarizing agents act as competitive antagonists.

Protection and positioning involve applying cricoid pressure to prevent regurgitation of gastric contents and positioning the patient’s neck appropriately. Tube placement is confirmed by visualizing the tube passing between the vocal cords, auscultation of the chest and stomach, end-tidal CO2 measurement, and visualizing misting of the tube. Post-intubation management includes standard care such as monitoring ECG, SpO2, NIBP, capnography, and maintaining sedation and neuromuscular blockade.

Overall, RSI is a technique used to quickly and safely secure the airway in patients who may be at risk of aspiration. It involves a series of steps to ensure proper preparation, oxygenation, drug administration, and tube placement. Monitoring and post-intubation care are also important aspects of RSI.

Both suxamethonium and rocuronium take approximately 45-60 seconds to induce paralysis. The time it takes for rocuronium to cause paralysis is similar to that of suxamethonium, which is also around 45-60 seconds.

Further Reading:

Rapid sequence induction (RSI) is a method used to place an endotracheal tube (ETT) in the trachea while minimizing the risk of aspiration. It involves inducing loss of consciousness while applying cricoid pressure, followed by intubation without face mask ventilation. The steps of RSI can be remembered using the 7 P’s: preparation, pre-oxygenation, pre-treatment, paralysis and induction, protection and positioning, placement with proof, and post-intubation management.

Preparation involves preparing the patient, equipment, team, and anticipating any difficulties that may arise during the procedure. Pre-oxygenation is important to ensure the patient has an adequate oxygen reserve and prolongs the time before desaturation. This is typically done by breathing 100% oxygen for 3 minutes. Pre-treatment involves administering drugs to counter expected side effects of the procedure and anesthesia agents used.

Paralysis and induction involve administering a rapid-acting induction agent followed by a neuromuscular blocking agent. Commonly used induction agents include propofol, ketamine, thiopentone, and etomidate. The neuromuscular blocking agents can be depolarizing (such as suxamethonium) or non-depolarizing (such as rocuronium). Depolarizing agents bind to acetylcholine receptors and generate an action potential, while non-depolarizing agents act as competitive antagonists.

Protection and positioning involve applying cricoid pressure to prevent regurgitation of gastric contents and positioning the patient’s neck appropriately. Tube placement is confirmed by visualizing the tube passing between the vocal cords, auscultation of the chest and stomach, end-tidal CO2 measurement, and visualizing misting of the tube. Post-intubation management includes standard care such as monitoring ECG, SpO2, NIBP, capnography, and maintaining sedation and neuromuscular blockade.

Overall, RSI is a technique used to quickly and safely secure the airway in patients who may be at risk of aspiration. It involves a series of steps to ensure proper preparation, oxygenation, drug administration, and tube placement. Monitoring and post-intubation care are also important aspects of RSI.

To prevent diffusion hypoxia, it is recommended to administer supplemental oxygen to patients for about 5 minutes after discontinuing nitrous oxide. This is important because there is a risk of developing diffusion hypoxia after the termination of nitrous oxide.

Further Reading:

Entonox® is a mixture of 50% nitrous oxide and 50% oxygen that can be used for self-administration to reduce anxiety. It can also be used alongside other anesthesia agents. However, its mechanism of action for anxiety reduction is not fully understood. The Entonox bottles are typically identified by blue and white color-coded collars, but a new standard will replace these with dark blue shoulders in the future. It is important to note that Entonox alone cannot be used as the sole maintenance agent in anesthesia.

One of the effects of nitrous oxide is the second-gas effect, where it speeds up the absorption of other inhaled anesthesia agents. Nitrous oxide enters the alveoli and diffuses into the blood, displacing nitrogen. This displacement causes the remaining alveolar gases to become more concentrated, increasing the fractional content of inhaled anesthesia gases and accelerating the uptake of volatile agents into the blood.

However, when nitrous oxide administration is stopped, it can cause diffusion hypoxia. Nitrous oxide exits the blood and diffuses back into the alveoli, while nitrogen diffuses in the opposite direction. Nitrous oxide enters the alveoli much faster than nitrogen leaves, resulting in the dilution of oxygen within the alveoli. This can lead to diffusion hypoxia, where the oxygen concentration in the alveoli is diluted, potentially causing oxygen deprivation in patients breathing air.

There are certain contraindications for using nitrous oxide, as it can expand in air-filled spaces. It should be avoided in conditions such as head injuries with intracranial air, pneumothorax, recent intraocular gas injection, and entrapped air following a recent underwater dive.

The earliest and most frequent clinical indication of malignant hyperthermia is typically an increase in end tidal CO2. An unexplained elevation in end tidal CO2 is often the initial and most reliable sign of this condition.

Further Reading:

Malignant hyperthermia is a rare and life-threatening syndrome that can be triggered by certain medications in individuals who are genetically susceptible. The most common triggers are suxamethonium and inhalational anaesthetic agents. The syndrome is caused by the release of stored calcium ions from skeletal muscle cells, leading to uncontrolled muscle contraction and excessive heat production. This results in symptoms such as high fever, sweating, flushed skin, rapid heartbeat, and muscle rigidity. It can also lead to complications such as acute kidney injury, rhabdomyolysis, and metabolic acidosis. Treatment involves discontinuing the trigger medication, administering dantrolene to inhibit calcium release and promote muscle relaxation, and managing any associated complications such as hyperkalemia and acidosis. Referral to a malignant hyperthermia center for further investigation is also recommended.

Nasopharyngeal airway adjuncts (NPAs) are selected based on their length, which should match the distance between the nostril and the tragus of the ear.

Further Reading:

Techniques to keep the airway open:

1. Suction: Used to remove obstructing material such as blood, vomit, secretions, and food debris from the oral cavity.

2. Chin lift manoeuvres: Involves lifting the head off the floor and lifting the chin to extend the head in relation to the neck. Improves alignment of the pharyngeal, laryngeal, and oral axes.

3. Jaw thrust: Used in trauma patients with cervical spine injury concerns. Fingers are placed under the mandible and gently pushed upward.

Airway adjuncts:

1. Oropharyngeal airway (OPA): Prevents the tongue from occluding the airway. Sized according to the patient by measuring from the incisor teeth to the angle of the mandible. Inserted with the tip facing backwards and rotated 180 degrees once it touches the back of the palate or oropharynx.

2. Nasopharyngeal airway (NPA): Useful when it is difficult to open the mouth or in semi-conscious patients. Sized by length (distance between nostril and tragus of the ear) and diameter (roughly that of the patient’s little finger). Contraindicated in basal skull and midface fractures.

Laryngeal mask airway (LMA):

– Supraglottic airway device used as a first line or rescue airway.
– Easy to insert, sized according to patient’s bodyweight.
– Advantages: Easy insertion, effective ventilation, some protection from aspiration.
– Disadvantages: Risk of hypoventilation, greater gastric inflation than endotracheal tube (ETT), risk of aspiration and laryngospasm.

Note: Proper training and assessment of the patient’s condition are essential for airway management.

The administration of propofol can result in venodilation, leading to a significant drop in blood pressure. This effect is particularly significant in patients who are already experiencing unstable blood flow.

Further Reading:

There are four commonly used induction agents in the UK: propofol, ketamine, thiopentone, and etomidate.

Propofol is a 1% solution that produces significant venodilation and myocardial depression. It can also reduce cerebral perfusion pressure. The typical dose for propofol is 1.5-2.5 mg/kg. However, it can cause side effects such as hypotension, respiratory depression, and pain at the site of injection.

Ketamine is another induction agent that produces a dissociative state. It does not display a dose-response continuum, meaning that the effects do not necessarily increase with higher doses. Ketamine can cause bronchodilation, which is useful in patients with asthma. The initial dose for ketamine is 0.5-2 mg/kg, with a typical IV dose of 1.5 mg/kg. Side effects of ketamine include tachycardia, hypertension, laryngospasm, unpleasant hallucinations, nausea and vomiting, hypersalivation, increased intracranial and intraocular pressure, nystagmus and diplopia, abnormal movements, and skin reactions.

Thiopentone is an ultra-short acting barbiturate that acts on the GABA receptor complex. It decreases cerebral metabolic oxygen and reduces cerebral blood flow and intracranial pressure. The adult dose for thiopentone is 3-5 mg/kg, while the child dose is 5-8 mg/kg. However, these doses should be halved in patients with hypovolemia. Side effects of thiopentone include venodilation, myocardial depression, and hypotension. It is contraindicated in patients with acute porphyrias and myotonic dystrophy.

Etomidate is the most haemodynamically stable induction agent and is useful in patients with hypovolemia, anaphylaxis, and asthma. It has similar cerebral effects to thiopentone. The dose for etomidate is 0.15-0.3 mg/kg. Side effects of etomidate include injection site pain, movement disorders, adrenal insufficiency, and apnoea. It is contraindicated in patients with sepsis due to adrenal suppression.

Inspired oxygen primarily works by removing nitrogen from the lungs, which would otherwise take up a significant portion of the lung capacity. This nitrogen is replaced with oxygen, leading to improved oxygenation of the tissues and an increased oxygen reserve. As a result, the patient can safely hold their breath for a longer period of time. It is recommended to preoxygenate the patient for at least 3 minutes.

Further Reading:

Rapid sequence induction (RSI) is a method used to place an endotracheal tube (ETT) in the trachea while minimizing the risk of aspiration. It involves inducing loss of consciousness while applying cricoid pressure, followed by intubation without face mask ventilation. The steps of RSI can be remembered using the 7 P’s: preparation, pre-oxygenation, pre-treatment, paralysis and induction, protection and positioning, placement with proof, and post-intubation management.

Preparation involves preparing the patient, equipment, team, and anticipating any difficulties that may arise during the procedure. Pre-oxygenation is important to ensure the patient has an adequate oxygen reserve and prolongs the time before desaturation. This is typically done by breathing 100% oxygen for 3 minutes. Pre-treatment involves administering drugs to counter expected side effects of the procedure and anesthesia agents used.

Paralysis and induction involve administering a rapid-acting induction agent followed by a neuromuscular blocking agent. Commonly used induction agents include propofol, ketamine, thiopentone, and etomidate. The neuromuscular blocking agents can be depolarizing (such as suxamethonium) or non-depolarizing (such as rocuronium). Depolarizing agents bind to acetylcholine receptors and generate an action potential, while non-depolarizing agents act as competitive antagonists.

Protection and positioning involve applying cricoid pressure to prevent regurgitation of gastric contents and positioning the patient’s neck appropriately. Tube placement is confirmed by visualizing the tube passing between the vocal cords, auscultation of the chest and stomach, end-tidal CO2 measurement, and visualizing misting of the tube. Post-intubation management includes standard care such as monitoring ECG, SpO2, NIBP, capnography, and maintaining sedation and neuromuscular blockade.

Overall, RSI is a technique used to quickly and safely secure the airway in patients who may be at risk of aspiration. It involves a series of steps to ensure proper preparation, oxygenation, drug administration, and tube placement. Monitoring and post-intubation care are also important aspects of RSI.

In patients with pre-existing hypovolaemia, the amount of sodium thiopentone administered should be reduced by half. This is because sodium thiopentone can cause venodilation and myocardial depression, which can result in significant hypovolaemia. Alternatively, an induction agent that does not cause hypotension, such as Etomidate, can be used instead. It is important to note that both propofol and thiopentone are known to cause hypotension.

Further Reading:

There are four commonly used induction agents in the UK: propofol, ketamine, thiopentone, and etomidate.

Propofol is a 1% solution that produces significant venodilation and myocardial depression. It can also reduce cerebral perfusion pressure. The typical dose for propofol is 1.5-2.5 mg/kg. However, it can cause side effects such as hypotension, respiratory depression, and pain at the site of injection.

Ketamine is another induction agent that produces a dissociative state. It does not display a dose-response continuum, meaning that the effects do not necessarily increase with higher doses. Ketamine can cause bronchodilation, which is useful in patients with asthma. The initial dose for ketamine is 0.5-2 mg/kg, with a typical IV dose of 1.5 mg/kg. Side effects of ketamine include tachycardia, hypertension, laryngospasm, unpleasant hallucinations, nausea and vomiting, hypersalivation, increased intracranial and intraocular pressure, nystagmus and diplopia, abnormal movements, and skin reactions.

Thiopentone is an ultra-short acting barbiturate that acts on the GABA receptor complex. It decreases cerebral metabolic oxygen and reduces cerebral blood flow and intracranial pressure. The adult dose for thiopentone is 3-5 mg/kg, while the child dose is 5-8 mg/kg. However, these doses should be halved in patients with hypovolemia. Side effects of thiopentone include venodilation, myocardial depression, and hypotension. It is contraindicated in patients with acute porphyrias and myotonic dystrophy.

Etomidate is the most haemodynamically stable induction agent and is useful in patients with hypovolemia, anaphylaxis, and asthma. It has similar cerebral effects to thiopentone. The dose for etomidate is 0.15-0.3 mg/kg. Side effects of etomidate include injection site pain, movement disorders, adrenal insufficiency, and apnoea. It is contraindicated in patients with sepsis due to adrenal suppression.

The administration of nitrous oxide increases the amount of inhaled anaesthetic gases in the body through a phenomenon called the ‘second gas effect’. Nitrous oxide is much more soluble than nitrogen, with a solubility that is 20 to 30 times higher. When nitrous oxide is given, it causes a decrease in the volume of air in the alveoli. Additionally, nitrous oxide can enhance the absorption of other inhaled anaesthetic agents through the second gas effect. However, it is important to note that nitrous oxide alone cannot be used as the sole maintenance agent in anaesthesia.

Further Reading:

Entonox® is a mixture of 50% nitrous oxide and 50% oxygen that can be used for self-administration to reduce anxiety. It can also be used alongside other anesthesia agents. However, its mechanism of action for anxiety reduction is not fully understood. The Entonox bottles are typically identified by blue and white color-coded collars, but a new standard will replace these with dark blue shoulders in the future. It is important to note that Entonox alone cannot be used as the sole maintenance agent in anesthesia.

One of the effects of nitrous oxide is the second-gas effect, where it speeds up the absorption of other inhaled anesthesia agents. Nitrous oxide enters the alveoli and diffuses into the blood, displacing nitrogen. This displacement causes the remaining alveolar gases to become more concentrated, increasing the fractional content of inhaled anesthesia gases and accelerating the uptake of volatile agents into the blood.

However, when nitrous oxide administration is stopped, it can cause diffusion hypoxia. Nitrous oxide exits the blood and diffuses back into the alveoli, while nitrogen diffuses in the opposite direction. Nitrous oxide enters the alveoli much faster than nitrogen leaves, resulting in the dilution of oxygen within the alveoli. This can lead to diffusion hypoxia, where the oxygen concentration in the alveoli is diluted, potentially causing oxygen deprivation in patients breathing air.

There are certain contraindications for using nitrous oxide, as it can expand in air-filled spaces. It should be avoided in conditions such as head injuries with intracranial air, pneumothorax, recent intraocular gas injection, and entrapped air following a recent underwater dive.

The presence of borborygmi in the epigastrium can indicate that the endotracheal tube (ETT) is incorrectly placed in the esophagus. There are several ways to verify the correct placement of the endotracheal tube (ETT).

One method is through direct visualization, where the ETT is observed passing through the vocal cords. Another method is by checking for fogging in the ETT, which can indicate proper placement. Auscultation of bilateral equal breath sounds is also a reliable way to confirm correct ETT placement.

Additionally, the absence of borborygmi in the epigastrium is a positive sign that the ETT is in the correct position. Capnography or using a CO2 detector can provide further confirmation of proper ETT placement. Finally, chest radiography can be used to visually assess the placement of the endotracheal tube.

Rocuronium is a type of neuromuscular blocker that does not cause depolarization.

Further Reading:

Rapid sequence induction (RSI) is a method used to place an endotracheal tube (ETT) in the trachea while minimizing the risk of aspiration. It involves inducing loss of consciousness while applying cricoid pressure, followed by intubation without face mask ventilation. The steps of RSI can be remembered using the 7 P’s: preparation, pre-oxygenation, pre-treatment, paralysis and induction, protection and positioning, placement with proof, and post-intubation management.

Preparation involves preparing the patient, equipment, team, and anticipating any difficulties that may arise during the procedure. Pre-oxygenation is important to ensure the patient has an adequate oxygen reserve and prolongs the time before desaturation. This is typically done by breathing 100% oxygen for 3 minutes. Pre-treatment involves administering drugs to counter expected side effects of the procedure and anesthesia agents used.

Paralysis and induction involve administering a rapid-acting induction agent followed by a neuromuscular blocking agent. Commonly used induction agents include propofol, ketamine, thiopentone, and etomidate. The neuromuscular blocking agents can be depolarizing (such as suxamethonium) or non-depolarizing (such as rocuronium). Depolarizing agents bind to acetylcholine receptors and generate an action potential, while non-depolarizing agents act as competitive antagonists.

Protection and positioning involve applying cricoid pressure to prevent regurgitation of gastric contents and positioning the patient’s neck appropriately. Tube placement is confirmed by visualizing the tube passing between the vocal cords, auscultation of the chest and stomach, end-tidal CO2 measurement, and visualizing misting of the tube. Post-intubation management includes standard care such as monitoring ECG, SpO2, NIBP, capnography, and maintaining sedation and neuromuscular blockade.

Overall, RSI is a technique used to quickly and safely secure the airway in patients who may be at risk of aspiration. It involves a series of steps to ensure proper preparation, oxygenation, drug administration, and tube placement. Monitoring and post-intubation care are also important aspects of RSI.

Lidocaine works by blocking voltage-gated sodium channels. These channels are responsible for the propagation of action potentials in nerve fibers. By blocking these channels, lidocaine prevents the influx of sodium ions into the nerve cells, thereby inhibiting the generation and conduction of nerve impulses. This results in local anesthesia, as the transmission of pain signals from the skin to the brain is effectively blocked.

Further Reading:

Local anaesthetics, such as lidocaine, bupivacaine, and prilocaine, are commonly used in the emergency department for topical or local infiltration to establish a field block. Lidocaine is often the first choice for field block prior to central line insertion. These anaesthetics work by blocking sodium channels, preventing the propagation of action potentials.

However, local anaesthetics can enter the systemic circulation and cause toxic side effects if administered in high doses. Clinicians must be aware of the signs and symptoms of local anaesthetic systemic toxicity (LAST) and know how to respond. Early signs of LAST include numbness around the mouth or tongue, metallic taste, dizziness, visual and auditory disturbances, disorientation, and drowsiness. If not addressed, LAST can progress to more severe symptoms such as seizures, coma, respiratory depression, and cardiovascular dysfunction.

The management of LAST is largely supportive. Immediate steps include stopping the administration of local anaesthetic, calling for help, providing 100% oxygen and securing the airway, establishing IV access, and controlling seizures with benzodiazepines or other medications. Cardiovascular status should be continuously assessed, and conventional therapies may be used to treat hypotension or arrhythmias. Intravenous lipid emulsion (intralipid) may also be considered as a treatment option.

If the patient goes into cardiac arrest, CPR should be initiated following ALS arrest algorithms, but lidocaine should not be used as an anti-arrhythmic therapy. Prolonged resuscitation may be necessary, and intravenous lipid emulsion should be administered. After the acute episode, the patient should be transferred to a clinical area with appropriate equipment and staff for further monitoring and care.

It is important to report cases of local anaesthetic toxicity to the appropriate authorities, such as the National Patient Safety Agency in the UK or the Irish Medicines Board in the Republic of Ireland. Additionally, regular clinical review should be conducted to exclude pancreatitis, as intravenous lipid emulsion can interfere with amylase or lipase assays.

Suxamethonium, also called succinylcholine, is currently the sole depolarising neuromuscular blocking drug used in clinical settings. It functions by binding to acetylcholine (Ach) receptors as an agonist. Unlike acetylcholine, it is not broken down by acetylcholinesterase, leading to a longer duration of binding and prolonged inhibition of neuromuscular transmission. Eventually, it is metabolized by plasma cholinesterase (pseudocholinesterase).

Further Reading:

Rapid sequence induction (RSI) is a method used to place an endotracheal tube (ETT) in the trachea while minimizing the risk of aspiration. It involves inducing loss of consciousness while applying cricoid pressure, followed by intubation without face mask ventilation. The steps of RSI can be remembered using the 7 P’s: preparation, pre-oxygenation, pre-treatment, paralysis and induction, protection and positioning, placement with proof, and post-intubation management.

Preparation involves preparing the patient, equipment, team, and anticipating any difficulties that may arise during the procedure. Pre-oxygenation is important to ensure the patient has an adequate oxygen reserve and prolongs the time before desaturation. This is typically done by breathing 100% oxygen for 3 minutes. Pre-treatment involves administering drugs to counter expected side effects of the procedure and anesthesia agents used.

Paralysis and induction involve administering a rapid-acting induction agent followed by a neuromuscular blocking agent. Commonly used induction agents include propofol, ketamine, thiopentone, and etomidate. The neuromuscular blocking agents can be depolarizing (such as suxamethonium) or non-depolarizing (such as rocuronium). Depolarizing agents bind to acetylcholine receptors and generate an action potential, while non-depolarizing agents act as competitive antagonists.

Protection and positioning involve applying cricoid pressure to prevent regurgitation of gastric contents and positioning the patient’s neck appropriately. Tube placement is confirmed by visualizing the tube passing between the vocal cords, auscultation of the chest and stomach, end-tidal CO2 measurement, and visualizing misting of the tube. Post-intubation management includes standard care such as monitoring ECG, SpO2, NIBP, capnography, and maintaining sedation and neuromuscular blockade.

Overall, RSI is a technique used to quickly and safely secure the airway in patients who may be at risk of aspiration. It involves a series of steps to ensure proper preparation, oxygenation, drug administration, and tube placement. Monitoring and post-intubation care are also important aspects of RSI.

The most significant factor in predicting postoperative nausea and vomiting (PONV) is being female. Females are three times more likely than males to experience PONV. Additionally, not smoking increases the risk of PONV by about two times. Having a history of motion sickness, PONV, or both also approximately doubles the risk of PONV. Age is another factor, with older adults being less likely to suffer from PONV. In children, those below 3 years of age have a lower risk of PONV compared to those older than 3.

Further Reading:

postoperative nausea and vomiting (PONV) is a common occurrence following procedures performed under sedation or anesthesia. It can be highly distressing for patients. Several risk factors have been identified for PONV, including female gender, a history of PONV or motion sickness, non-smoking status, patient age, use of volatile anesthetics, longer duration of anesthesia, perioperative opioid use, use of nitrous oxide, and certain types of surgery such as abdominal and gynecological procedures.

To manage PONV, antiemetics are commonly used. These medications work by targeting different receptors in the body. Cyclizine and promethazine are histamine H1-receptor antagonists, which block the action of histamine and help reduce nausea and vomiting. Ondansetron is a serotonin 5-HT3 receptor antagonist, which blocks the action of serotonin and is effective in preventing and treating PONV. Prochlorperazine is a dopamine D2 receptor antagonist, which blocks the action of dopamine and helps alleviate symptoms of nausea and vomiting. Metoclopramide is also a dopamine D2 receptor antagonist and a 5-HT3 receptor antagonist, providing dual action against PONV. It is also a 5-HT4 receptor agonist, which helps improve gastric emptying and reduces the risk of PONV.

Assessment and management of PONV involves a comprehensive approach. Healthcare professionals need to assess the patient’s risk factors for PONV and take appropriate measures to prevent its occurrence. This may include selecting the appropriate anesthesia technique, using antiemetics prophylactically, and providing adequate pain control. In cases where PONV does occur, prompt treatment with antiemetics should be initiated to alleviate symptoms and provide relief to the patient. Close monitoring of the patient’s condition and response to treatment is essential to ensure effective management of PONV.

When a patient is semi-conscious, it is less likely for the nasopharyngeal airway adjuncts (NPA’s) to trigger the gag reflex compared to oropharyngeal airways. Therefore, NPA’s are typically the preferred option in these cases.

Further Reading:

Techniques to keep the airway open:

1. Suction: Used to remove obstructing material such as blood, vomit, secretions, and food debris from the oral cavity.

2. Chin lift manoeuvres: Involves lifting the head off the floor and lifting the chin to extend the head in relation to the neck. Improves alignment of the pharyngeal, laryngeal, and oral axes.

3. Jaw thrust: Used in trauma patients with cervical spine injury concerns. Fingers are placed under the mandible and gently pushed upward.

Airway adjuncts:

1. Oropharyngeal airway (OPA): Prevents the tongue from occluding the airway. Sized according to the patient by measuring from the incisor teeth to the angle of the mandible. Inserted with the tip facing backwards and rotated 180 degrees once it touches the back of the palate or oropharynx.

2. Nasopharyngeal airway (NPA): Useful when it is difficult to open the mouth or in semi-conscious patients. Sized by length (distance between nostril and tragus of the ear) and diameter (roughly that of the patient’s little finger). Contraindicated in basal skull and midface fractures.

Laryngeal mask airway (LMA):

– Supraglottic airway device used as a first line or rescue airway.
– Easy to insert, sized according to patient’s bodyweight.
– Advantages: Easy insertion, effective ventilation, some protection from aspiration.
– Disadvantages: Risk of hypoventilation, greater gastric inflation than endotracheal tube (ETT), risk of aspiration and laryngospasm.

Note: Proper training and assessment of the patient’s condition are essential for airway management.

Adrenaline acts on all types of adrenergic receptors without preference. It is administered in doses of 1 mg every 3-5 minutes during cardiac arrest. On the other hand, Amiodarone functions by blocking voltage-gated potassium channels and is typically administered after the third shock.

Further Reading:

In the management of respiratory and cardiac arrest, several drugs are commonly used to help restore normal function and improve outcomes. Adrenaline is a non-selective agonist of adrenergic receptors and is administered intravenously at a dose of 1 mg every 3-5 minutes. It works by causing vasoconstriction, increasing systemic vascular resistance (SVR), and improving cardiac output by increasing the force of heart contraction. Adrenaline also has bronchodilatory effects.

Amiodarone is another drug used in cardiac arrest situations. It blocks voltage-gated potassium channels, which prolongs repolarization and reduces myocardial excitability. The initial dose of amiodarone is 300 mg intravenously after 3 shocks, followed by a dose of 150 mg after 5 shocks.

Lidocaine is an alternative to amiodarone in cardiac arrest situations. It works by blocking sodium channels and decreasing heart rate. The recommended dose is 1 mg/kg by slow intravenous injection, with a repeat half of the initial dose after 5 minutes. The maximum total dose of lidocaine is 3 mg/kg.

Magnesium sulfate is used to reverse myocardial hyperexcitability associated with hypomagnesemia. It is administered intravenously at a dose of 2 g over 10-15 minutes. An additional dose may be given if necessary, but the maximum total dose should not exceed 3 g.

Atropine is an antagonist of muscarinic acetylcholine receptors and is used to counteract the slowing of heart rate caused by the parasympathetic nervous system. It is administered intravenously at a dose of 500 mcg every 3-5 minutes, with a maximum dose of 3 mg.

Naloxone is a competitive antagonist for opioid receptors and is used in cases of respiratory arrest caused by opioid overdose. It has a short duration of action, so careful monitoring is necessary. The initial dose of naloxone is 400 micrograms, followed by 800 mcg after 1 minute. The dose can be gradually escalated up to 2 mg per dose if there is no response to the preceding dose.

It is important for healthcare professionals to have knowledge of the pharmacology and dosing schedules of these drugs in order to effectively manage respiratory and cardiac arrest situations.

Bier’s block is a regional intravenous anesthesia technique commonly used for minor surgical procedures of the forearm or for reducing distal radius fractures in the emergency department (ED). It is recommended by NICE as the preferred anesthesia block for adults requiring manipulation of distal forearm fractures in the ED.

Before performing the procedure, a pre-procedure checklist should be completed, including obtaining consent, recording the patient’s weight, ensuring the resuscitative equipment is available, and monitoring the patient’s vital signs throughout the procedure. The air cylinder should be checked if not using an electronic machine, and the cuff should be checked for leaks.

During the procedure, a double cuff tourniquet is placed on the upper arm, and the arm is elevated to exsanguinate the limb. The proximal cuff is inflated to a pressure 100 mmHg above the systolic blood pressure, up to a maximum of 300 mmHg. The time of inflation and pressure should be recorded, and the absence of the radial pulse should be confirmed. 0.5% plain prilocaine is then injected slowly, and the time of injection is recorded. The patient should be warned about the potential cold/hot sensation and mottled appearance of the arm. After injection, the cannula is removed and pressure is applied to the venipuncture site to prevent bleeding. After approximately 10 minutes, the patient should have anesthesia and should not feel pain during manipulation. If anesthesia is successful, the manipulation can be performed, and a plaster can be applied by a second staff member. A check x-ray should be obtained with the arm lowered onto a pillow. The tourniquet should be monitored at all times, and the cuff should be inflated for a minimum of 20 minutes and a maximum of 45 minutes. If rotation of the cuff is required, it should be done after the manipulation and plaster application. After the post-reduction x-ray is satisfactory, the cuff can be deflated while observing the patient and monitors. Limb circulation should be checked prior to discharge, and appropriate follow-up and analgesia should be arranged.

There are several contraindications to performing Bier’s block, including allergy to local anesthetic, hypertension over 200 mm Hg, infection in the limb, lymphedema, methemoglobinemia, morbid obesity, peripheral vascular disease, procedures needed in both arms, Raynaud’s phenomenon, scleroderma, severe hypertension and sickle cell disease.

During cardiac arrest, Lidocaine is administered through a slow IV injection at an initial dose of 1 mg/kg when deemed suitable.

Further Reading:

In the management of respiratory and cardiac arrest, several drugs are commonly used to help restore normal function and improve outcomes. Adrenaline is a non-selective agonist of adrenergic receptors and is administered intravenously at a dose of 1 mg every 3-5 minutes. It works by causing vasoconstriction, increasing systemic vascular resistance (SVR), and improving cardiac output by increasing the force of heart contraction. Adrenaline also has bronchodilatory effects.

Amiodarone is another drug used in cardiac arrest situations. It blocks voltage-gated potassium channels, which prolongs repolarization and reduces myocardial excitability. The initial dose of amiodarone is 300 mg intravenously after 3 shocks, followed by a dose of 150 mg after 5 shocks.

Lidocaine is an alternative to amiodarone in cardiac arrest situations. It works by blocking sodium channels and decreasing heart rate. The recommended dose is 1 mg/kg by slow intravenous injection, with a repeat half of the initial dose after 5 minutes. The maximum total dose of lidocaine is 3 mg/kg.

Magnesium sulfate is used to reverse myocardial hyperexcitability associated with hypomagnesemia. It is administered intravenously at a dose of 2 g over 10-15 minutes. An additional dose may be given if necessary, but the maximum total dose should not exceed 3 g.

Atropine is an antagonist of muscarinic acetylcholine receptors and is used to counteract the slowing of heart rate caused by the parasympathetic nervous system. It is administered intravenously at a dose of 500 mcg every 3-5 minutes, with a maximum dose of 3 mg.

Naloxone is a competitive antagonist for opioid receptors and is used in cases of respiratory arrest caused by opioid overdose. It has a short duration of action, so careful monitoring is necessary. The initial dose of naloxone is 400 micrograms, followed by 800 mcg after 1 minute. The dose can be gradually escalated up to 2 mg per dose if there is no response to the preceding dose.

It is important for healthcare professionals to have knowledge of the pharmacology and dosing schedules of these drugs in order to effectively manage respiratory and cardiac arrest situations.

When suxamethonium is administered for neuromuscular blockade during rapid sequence induction, one of the clinical observations typically seen is muscle fasciculations. However, when rocuronium is used instead, muscle fasciculations are not present.

Further Reading:

Rapid sequence induction (RSI) is a method used to place an endotracheal tube (ETT) in the trachea while minimizing the risk of aspiration. It involves inducing loss of consciousness while applying cricoid pressure, followed by intubation without face mask ventilation. The steps of RSI can be remembered using the 7 P’s: preparation, pre-oxygenation, pre-treatment, paralysis and induction, protection and positioning, placement with proof, and post-intubation management.

Preparation involves preparing the patient, equipment, team, and anticipating any difficulties that may arise during the procedure. Pre-oxygenation is important to ensure the patient has an adequate oxygen reserve and prolongs the time before desaturation. This is typically done by breathing 100% oxygen for 3 minutes. Pre-treatment involves administering drugs to counter expected side effects of the procedure and anesthesia agents used.

Paralysis and induction involve administering a rapid-acting induction agent followed by a neuromuscular blocking agent. Commonly used induction agents include propofol, ketamine, thiopentone, and etomidate. The neuromuscular blocking agents can be depolarizing (such as suxamethonium) or non-depolarizing (such as rocuronium). Depolarizing agents bind to acetylcholine receptors and generate an action potential, while non-depolarizing agents act as competitive antagonists.

Protection and positioning involve applying cricoid pressure to prevent regurgitation of gastric contents and positioning the patient’s neck appropriately. Tube placement is confirmed by visualizing the tube passing between the vocal cords, auscultation of the chest and stomach, end-tidal CO2 measurement, and visualizing misting of the tube. Post-intubation management includes standard care such as monitoring ECG, SpO2, NIBP, capnography, and maintaining sedation and neuromuscular blockade.

Overall, RSI is a technique used to quickly and safely secure the airway in patients who may be at risk of aspiration. It involves a series of steps to ensure proper preparation, oxygenation, drug administration, and tube placement. Monitoring and post-intubation care are also important aspects of RSI.

During pre-oxygenation, inspired Oxygen primarily works by removing Nitrogen and increasing the presence of Oxygen. Additionally, it helps to optimize the levels of oxygen in the alveolar, arterial, tissue, and venous areas.

Further Reading:

Rapid sequence induction (RSI) is a method used to place an endotracheal tube (ETT) in the trachea while minimizing the risk of aspiration. It involves inducing loss of consciousness while applying cricoid pressure, followed by intubation without face mask ventilation. The steps of RSI can be remembered using the 7 P’s: preparation, pre-oxygenation, pre-treatment, paralysis and induction, protection and positioning, placement with proof, and post-intubation management.

Preparation involves preparing the patient, equipment, team, and anticipating any difficulties that may arise during the procedure. Pre-oxygenation is important to ensure the patient has an adequate oxygen reserve and prolongs the time before desaturation. This is typically done by breathing 100% oxygen for 3 minutes. Pre-treatment involves administering drugs to counter expected side effects of the procedure and anesthesia agents used.

Paralysis and induction involve administering a rapid-acting induction agent followed by a neuromuscular blocking agent. Commonly used induction agents include propofol, ketamine, thiopentone, and etomidate. The neuromuscular blocking agents can be depolarizing (such as suxamethonium) or non-depolarizing (such as rocuronium). Depolarizing agents bind to acetylcholine receptors and generate an action potential, while non-depolarizing agents act as competitive antagonists.

Protection and positioning involve applying cricoid pressure to prevent regurgitation of gastric contents and positioning the patient’s neck appropriately. Tube placement is confirmed by visualizing the tube passing between the vocal cords, auscultation of the chest and stomach, end-tidal CO2 measurement, and visualizing misting of the tube. Post-intubation management includes standard care such as monitoring ECG, SpO2, NIBP, capnography, and maintaining sedation and neuromuscular blockade.

Overall, RSI is a technique used to quickly and safely secure the airway in patients who may be at risk of aspiration. It involves a series of steps to ensure proper preparation, oxygenation, drug administration, and tube placement. Monitoring and post-intubation care are also important aspects of RSI.

Amiodarone functions by inhibiting voltage-gated potassium channels, leading to an extended repolarization period and decreased excitability of the heart muscle.

Further Reading:

In the management of respiratory and cardiac arrest, several drugs are commonly used to help restore normal function and improve outcomes. Adrenaline is a non-selective agonist of adrenergic receptors and is administered intravenously at a dose of 1 mg every 3-5 minutes. It works by causing vasoconstriction, increasing systemic vascular resistance (SVR), and improving cardiac output by increasing the force of heart contraction. Adrenaline also has bronchodilatory effects.

Amiodarone is another drug used in cardiac arrest situations. It blocks voltage-gated potassium channels, which prolongs repolarization and reduces myocardial excitability. The initial dose of amiodarone is 300 mg intravenously after 3 shocks, followed by a dose of 150 mg after 5 shocks.

Lidocaine is an alternative to amiodarone in cardiac arrest situations. It works by blocking sodium channels and decreasing heart rate. The recommended dose is 1 mg/kg by slow intravenous injection, with a repeat half of the initial dose after 5 minutes. The maximum total dose of lidocaine is 3 mg/kg.

Magnesium sulfate is used to reverse myocardial hyperexcitability associated with hypomagnesemia. It is administered intravenously at a dose of 2 g over 10-15 minutes. An additional dose may be given if necessary, but the maximum total dose should not exceed 3 g.

Atropine is an antagonist of muscarinic acetylcholine receptors and is used to counteract the slowing of heart rate caused by the parasympathetic nervous system. It is administered intravenously at a dose of 500 mcg every 3-5 minutes, with a maximum dose of 3 mg.

Naloxone is a competitive antagonist for opioid receptors and is used in cases of respiratory arrest caused by opioid overdose. It has a short duration of action, so careful monitoring is necessary. The initial dose of naloxone is 400 micrograms, followed by 800 mcg after 1 minute. The dose can be gradually escalated up to 2 mg per dose if there is no response to the preceding dose.

It is important for healthcare professionals to have knowledge of the pharmacology and dosing schedules of these drugs in order to effectively manage respiratory and cardiac arrest situations.

Ondansetron is a medication that works by blocking serotonin receptors in the body. It is commonly used as a first-line treatment for postoperative nausea and vomiting (PONV), which can occur after procedures done under sedation or anesthesia.

Further Reading:

postoperative nausea and vomiting (PONV) is a common occurrence following procedures performed under sedation or anesthesia. It can be highly distressing for patients. Several risk factors have been identified for PONV, including female gender, a history of PONV or motion sickness, non-smoking status, patient age, use of volatile anesthetics, longer duration of anesthesia, perioperative opioid use, use of nitrous oxide, and certain types of surgery such as abdominal and gynecological procedures.

To manage PONV, antiemetics are commonly used. These medications work by targeting different receptors in the body. Cyclizine and promethazine are histamine H1-receptor antagonists, which block the action of histamine and help reduce nausea and vomiting. Ondansetron is a serotonin 5-HT3 receptor antagonist, which blocks the action of serotonin and is effective in preventing and treating PONV. Prochlorperazine is a dopamine D2 receptor antagonist, which blocks the action of dopamine and helps alleviate symptoms of nausea and vomiting. Metoclopramide is also a dopamine D2 receptor antagonist and a 5-HT3 receptor antagonist, providing dual action against PONV. It is also a 5-HT4 receptor agonist, which helps improve gastric emptying and reduces the risk of PONV.

Assessment and management of PONV involves a comprehensive approach. Healthcare professionals need to assess the patient’s risk factors for PONV and take appropriate measures to prevent its occurrence. This may include selecting the appropriate anesthesia technique, using antiemetics prophylactically, and providing adequate pain control. In cases where PONV does occur, prompt treatment with antiemetics should be initiated to alleviate symptoms and provide relief to the patient. Close monitoring of the patient’s condition and response to treatment is essential to ensure effective management of PONV.