This patient is currently experiencing moderate shock, classified as class III. This level of shock corresponds to a loss of 30-40% of their circulatory volume, which is equivalent to a blood loss of 1500-2000 mL.

Hemorrhage can be categorized into four different classes based on physiological parameters and clinical signs. These classes are classified as class I, class II, class III, and class IV.

In class I hemorrhage, the blood loss is up to 750 mL or up to 15% of the blood volume. The pulse rate is less than 100 beats per minute, and the systolic blood pressure is normal. The pulse pressure may be normal or increased, and the respiratory rate is within the range of 14-20 breaths per minute. The urine output is greater than 30 mL per hour, and the patient’s CNS/mental status is slightly anxious.

In class II hemorrhage, the blood loss ranges from 750-1500 mL or 15-30% of the blood volume. The pulse rate is between 100-120 beats per minute, and the systolic blood pressure remains normal. The pulse pressure is decreased, and the respiratory rate increases to 20-30 breaths per minute. The urine output decreases to 20-30 mL per hour, and the patient may experience mild anxiety.

The patient in this case is in class III hemorrhage, with a blood loss of 1500-2000 mL or 30-40% of the blood volume. The pulse rate is elevated, ranging from 120-140 beats per minute, and the systolic blood pressure is decreased. The pulse pressure is also decreased, and the respiratory rate is elevated to 30-40 breaths per minute. The urine output decreases significantly to 5-15 mL per hour, and the patient may experience anxiety and confusion.

Class IV hemorrhage represents the most severe level of blood loss, with a loss of over 40% of the blood volume. The pulse rate is greater than 140 beats per minute, and the systolic blood pressure is significantly decreased. The pulse pressure is decreased, and the respiratory rate is over 40 breaths per minute. The urine output becomes negligible, and the patient may become confused and lethargic.

Compartment syndrome can occur when there are circumferential burns on the arms or legs. This typically happens with full thickness burns, where the burnt skin becomes stiff and compresses the compartment, making it difficult for blood to flow out. To treat this condition, escharotomy and possibly fasciotomy may be necessary.

Further Reading:

Burn injuries can be classified based on their type (degree, partial thickness or full thickness), extent as a percentage of total body surface area (TBSA), and severity (minor, moderate, major/severe). Severe burns are defined as a >10% TBSA in a child and >15% TBSA in an adult.

When assessing a burn, it is important to consider airway injury, carbon monoxide poisoning, type of burn, extent of burn, special considerations, and fluid status. Special considerations may include head and neck burns, circumferential burns, thorax burns, electrical burns, hand burns, and burns to the genitalia.

Airway management is a priority in burn injuries. Inhalation of hot particles can cause damage to the respiratory epithelium and lead to airway compromise. Signs of inhalation injury include visible burns or erythema to the face, soot around the nostrils and mouth, burnt/singed nasal hairs, hoarse voice, wheeze or stridor, swollen tissues in the mouth or nostrils, and tachypnea and tachycardia. Supplemental oxygen should be provided, and endotracheal intubation may be necessary if there is airway obstruction or impending obstruction.

The initial management of a patient with burn injuries involves conserving body heat, covering burns with clean or sterile coverings, establishing IV access, providing pain relief, initiating fluid resuscitation, measuring urinary output with a catheter, maintaining nil by mouth status, closely monitoring vital signs and urine output, monitoring the airway, preparing for surgery if necessary, and administering medications.

Burns can be classified based on the depth of injury, ranging from simple erythema to full thickness burns that penetrate into subcutaneous tissue. The extent of a burn can be estimated using methods such as the rule of nines or the Lund and Browder chart, which takes into account age-specific body proportions.

Fluid management is crucial in burn injuries due to significant fluid losses. Evaporative fluid loss from burnt skin and increased permeability of blood vessels can lead to reduced intravascular volume and tissue perfusion. Fluid resuscitation should be aggressive in severe burns, while burns <15% in adults and <10% in children may not require immediate fluid resuscitation. The Parkland formula can be used to calculate the intravenous fluid requirements for someone with a significant burn injury.

An X-ray of the foot is recommended when there is pain in the base of the fifth metatarsal or the navicular bone, as well as an inability to bear weight immediately after an injury or in the emergency department. The Ottawa ankle rules can also be used to determine if an X-ray is necessary for ankle injuries. These rules focus on two specific areas (the malleolar and midfoot zones) to determine if an X-ray of the ankle or foot is needed. More information on these rules can be found in the notes below.

Further Reading:

Ankle fractures are traumatic lower limb and joint injuries that involve the articulation between the tibia, fibula, and talus bones. The ankle joint allows for plantar and dorsiflexion of the foot. The key bony prominences of the ankle are called malleoli, with the medial and posterior malleolus being prominences of the distal tibia and the lateral malleolus being a prominence of the distal fibula. The distal fibula and tibia are joined together by the distal tibiofibular joint or syndesmosis, which is comprised of three key ligaments. An ankle X-ray series is often used to guide clinical decision making in patients with ankle injuries, using the Ottawa ankle rules to determine if an X-ray is necessary. Ankle fractures are commonly described by the anatomical fracture pattern seen on X-ray relative to the malleoli involved, such as isolated malleolus fractures, bimalleolar fractures, and trimalleolar fractures. The Weber classification is a commonly used system for distal fibula fractures, categorizing them as Weber A, B, or C based on the level and extent of the fracture.

Early assessment of the airway is a critical aspect of managing a patient who has suffered burns. Airway blockage can occur rapidly due to direct injury, such as inhalation injury, or as a result of swelling caused by the burn. If there is a history of trauma, the airway should be evaluated and treated while maintaining control of the cervical spine.

Signs of airway obstruction may not be immediately apparent, as swelling typically does not occur right away. Children with thermal burns are at a higher risk of airway obstruction compared to adults due to their smaller airway size, so they require careful observation.

There are several risk factors for airway obstruction in burned patients, including inhalation injury, the presence of soot in the mouth or nostrils, singed nasal hairs, burns to the head, face, or neck, burns inside the mouth, a large burn area with increasing depth, and associated trauma. A carboxyhemoglobin level above 10% is also suggestive of an inhalation injury.

Patients with head injuries who show any signs of basal skull fracture, such as haemotympanum, ‘panda’ eyes, cerebrospinal fluid leakage from the ear or nose, or Battle’s sign, should undergo urgent CT imaging. Additionally, the following indications also warrant a CT scan: a Glasgow Coma Scale (GCS) score of less than 13 on initial assessment in the emergency department (ED), a GCS score of less than 15 at 2 hours after the injury on assessment in the ED, suspected open or depressed skull fracture, post-traumatic seizure, new focal neurological deficit, greater than 1 episode of vomiting, or the patient being on anticoagulation. If any of these signs are present, a CT scan should be performed within 1 hour, except for patients on anticoagulation who should have a CT scan within 8 hours if they do not have any other signs. However, if patients on anticoagulation do have any of the other signs, the CT scan should be performed within 1 hour.

Further Reading:

Indications for CT Scanning in Head Injuries (Adults):
– CT head scan should be performed within 1 hour if any of the following features are present:
– GCS < 13 on initial assessment in the ED
– GCS < 15 at 2 hours after the injury on assessment in the ED
– Suspected open or depressed skull fracture
– Any sign of basal skull fracture (haemotympanum, ‘panda’ eyes, cerebrospinal fluid leakage from the ear or nose, Battle’s sign)
– Post-traumatic seizure
– New focal neurological deficit
– > 1 episode of vomiting

Indications for CT Scanning in Head Injuries (Children):
– CT head scan should be performed within 1 hour if any of the features in List 1 are present:
– Suspicion of non-accidental injury
– Post-traumatic seizure but no history of epilepsy
– GCS < 14 on initial assessment in the ED for children more than 1 year of age
– Paediatric GCS < 15 on initial assessment in the ED for children under 1 year of age
– At 2 hours after the injury, GCS < 15
– Suspected open or depressed skull fracture or tense fontanelle
– Any sign of basal skull fracture (haemotympanum, ‘panda’ eyes, cerebrospinal fluid leakage from the ear or nose, Battle’s sign)
– New focal neurological deficit
– For children under 1 year, presence of bruise, swelling or laceration of more than 5 cm on the head

– CT head scan should be performed within 1 hour if none of the above features are present but two or more of the features in List 2 are present:
– Loss of consciousness lasting more than 5 minutes (witnessed)
– Abnormal drowsiness
– Three or more discrete episodes of vomiting
– Dangerous mechanism of injury (high-speed road traffic accident, fall from a height.

Assessing the depth of a burn is crucial for determining the severity of the injury and planning appropriate wound care. Burns are typically classified as first-, second-, or third-degree, depending on how deeply they penetrate the skin’s surface.

First-degree burns, also known as superficial burns, only affect the outer layer of skin called the epidermis. These burns are characterized by redness and pain, with dry skin and no blistering. An example of a first-degree burn is mild sunburn. They usually do not require intravenous fluid replacement and are not included in the assessment of the burn’s extent. Long-term tissue damage is rare with these burns.

Second-degree burns, also called partial-thickness burns, involve both the epidermis and part of the dermis layer of skin. They can be further categorized as superficial partial-thickness or deep partial-thickness burns. Superficial partial-thickness burns are moist, hypersensitive, potentially blistered, uniformly pink, and blanch when touched. Deep partial-thickness burns are drier, less painful, potentially blistered, red or mottled in appearance, and do not blanch when touched.

Third-degree burns, also known as full-thickness burns, destroy both the epidermis and dermis layers of skin and extend into the subcutaneous tissue. These burns may also damage underlying bones, muscles, and tendons. The burn site appears translucent or waxy white, or it can be charred. Once the epidermis is removed, the underlying dermis may initially appear red but does not blanch under pressure. This dermis is typically dry and does not produce any fluid. Since the nerve endings are destroyed, there is no sensation in the affected area.

To relieve the patient’s respiratory distress, the most suitable initial intervention would be positive pressure ventilation. This involves providing mechanical assistance to the patient’s breathing by delivering air or oxygen under pressure through a mask or endotracheal tube. This helps to improve oxygenation and ventilation, ensuring that the patient’s lungs are adequately supplied with oxygen and carbon dioxide is effectively removed. Positive pressure ventilation can help stabilize the patient’s breathing and alleviate the respiratory distress caused by the flail segment.

Further Reading:

Flail chest is a serious condition that occurs when multiple ribs are fractured in two or more places, causing a segment of the ribcage to no longer expand properly. This condition is typically caused by high-impact thoracic blunt trauma and is often accompanied by other significant injuries to the chest.

The main symptom of flail chest is a chest deformity, where the affected area moves in a paradoxical manner compared to the rest of the ribcage. This can cause chest pain and difficulty breathing, known as dyspnea. X-rays may also show evidence of lung contusion, indicating further damage to the chest.

In terms of management, conservative treatment is usually the first approach. This involves providing adequate pain relief and respiratory support to the patient. However, if there are associated injuries such as a pneumothorax or hemothorax, specific interventions like thoracostomy or surgery may be necessary.

Positive pressure ventilation can be used to provide internal splinting of the airways, helping to prevent atelectasis, a condition where the lungs collapse. Overall, prompt and appropriate management is crucial in order to prevent further complications and improve the patient’s outcome.

To calculate the total fluid requirement over 24 hours, you need to multiply the TBSA (Total Body Surface Area) by the weight in kilograms. In this particular case, the calculation would be 4 multiplied by 20 multiplied by 80, resulting in a total of 6400 milliliters.

Further Reading:

Burn injuries can be classified based on their type (degree, partial thickness or full thickness), extent as a percentage of total body surface area (TBSA), and severity (minor, moderate, major/severe). Severe burns are defined as a >10% TBSA in a child and >15% TBSA in an adult.

When assessing a burn, it is important to consider airway injury, carbon monoxide poisoning, type of burn, extent of burn, special considerations, and fluid status. Special considerations may include head and neck burns, circumferential burns, thorax burns, electrical burns, hand burns, and burns to the genitalia.

Airway management is a priority in burn injuries. Inhalation of hot particles can cause damage to the respiratory epithelium and lead to airway compromise. Signs of inhalation injury include visible burns or erythema to the face, soot around the nostrils and mouth, burnt/singed nasal hairs, hoarse voice, wheeze or stridor, swollen tissues in the mouth or nostrils, and tachypnea and tachycardia. Supplemental oxygen should be provided, and endotracheal intubation may be necessary if there is airway obstruction or impending obstruction.

The initial management of a patient with burn injuries involves conserving body heat, covering burns with clean or sterile coverings, establishing IV access, providing pain relief, initiating fluid resuscitation, measuring urinary output with a catheter, maintaining nil by mouth status, closely monitoring vital signs and urine output, monitoring the airway, preparing for surgery if necessary, and administering medications.

Burns can be classified based on the depth of injury, ranging from simple erythema to full thickness burns that penetrate into subcutaneous tissue. The extent of a burn can be estimated using methods such as the rule of nines or the Lund and Browder chart, which takes into account age-specific body proportions.

Fluid management is crucial in burn injuries due to significant fluid losses. Evaporative fluid loss from burnt skin and increased permeability of blood vessels can lead to reduced intravascular volume and tissue perfusion. Fluid resuscitation should be aggressive in severe burns, while burns <15% in adults and <10% in children may not require immediate fluid resuscitation. The Parkland formula can be used to calculate the intravenous fluid requirements for someone with a significant burn injury.

ATLS guidelines now suggest administering only 1 liter of crystalloid fluid during the initial assessment. If patients do not respond to the crystalloid, it is recommended to quickly transition to blood products. Studies have shown that infusing more than 1.5 liters of crystalloid fluid is associated with higher mortality rates in trauma cases. Therefore, it is advised to prioritize the early use of blood products and avoid large volumes of crystalloid fluid in trauma patients. In cases where it is necessary, massive transfusion should be considered, defined as the transfusion of more than 10 units of blood in 24 hours or more than 4 units of blood in one hour. For patients with evidence of Class III and IV hemorrhage, early resuscitation with blood and blood products in low ratios is recommended.

Based on the findings of significant trials, such as the CRASH-2 study, the use of tranexamic acid is now recommended within 3 hours. This involves administering a loading dose of 1 gram intravenously over 10 minutes, followed by an infusion of 1 gram over eight hours. In some regions, tranexamic acid is also being utilized in the prehospital setting.

This patient is currently experiencing moderate shock, classified as class III. This level of shock corresponds to a loss of 30-40% of their circulatory volume, which is equivalent to a blood loss of 1500-2000 mL.

Hemorrhage can be categorized into four classes based on physiological parameters and clinical signs. These classes are classified as class I, class II, class III, and class IV.

In class I hemorrhage, the blood loss is up to 750 mL or up to 15% of the blood volume. The pulse rate is less than 100 beats per minute, and the systolic blood pressure is normal. The pulse pressure may be normal or increased, and the respiratory rate is within the range of 14-20 breaths per minute. The urine output is greater than 30 mL per hour, and the patient’s CNS/mental status is slightly anxious.

In class II hemorrhage, the blood loss ranges from 750-1500 mL or 15-30% of the blood volume. The pulse rate is between 100-120 beats per minute, and the systolic blood pressure is still normal. The pulse pressure is decreased, and the respiratory rate increases to 20-30 breaths per minute. The urine output decreases to 20-30 mL per hour, and the patient may experience mild anxiety.

In class III hemorrhage, like the case of this patient, the blood loss is between 1500-2000 mL or 30-40% of the blood volume. The pulse rate further increases to 120-140 beats per minute, and the systolic blood pressure decreases. The pulse pressure continues to decrease, and the respiratory rate rises to 30-40 breaths per minute. The urine output significantly decreases to 5-15 mL per hour, and the patient becomes anxious and confused.

In class IV hemorrhage, the blood loss exceeds 2000 mL or more than 40% of the blood volume. The pulse rate is greater than 140 beats per minute, and the systolic blood pressure is significantly decreased. The pulse pressure is further decreased, and the respiratory rate exceeds 40 breaths per minute. The urine output becomes negligible, and the patient’s CNS/mental status deteriorates to a state of confusion and lethargy.