The electrical conduction system of the heart starts with the SA node which generates spontaneous action potentials.

This is conducted across both atria by cell to cell conduction, and occurs at around 1 m/s. The only pathway for the action potential to enter the ventricles is through the AV node in a normal heart.
At this site, conduction is very slow at 0.05ms, which allows for the atria to completely contract and fill the ventricles with blood before the ventricles depolarise and contract.

The action potentials are conducted through the Bundle of His from the AV node which then splits into the left and right bundle branches. This conduction is very fast, (,2m/s), and brings the action potential to the Purkinje fibres.

Purkinje fibres are specialised conducting cells which allow for a faster conduction speed of the action potential (,2-4m/s). This allows for a strong synchronized contraction from the ventricle and thus efficient generation of pressure in systole.

Impaired ventricular relaxation reduces diastolic filling and therefore preload.

Decreased blood volume decreases preload due to reduced venous return.

Heart failure is characterized by reduced ejection fraction and therefore stroke volume.

Cardiac output = stroke volume x heart rate

Left ventricular ejection fraction = (stroke volume / end diastolic LV volume ) x 100%

Stroke volume = end diastolic LV volume – end systolic LV volume

Pulse pressure (is increased by stroke volume) = Systolic Pressure – Diastolic Pressure

Systemic vascular resistance = mean arterial pressure / cardiac output
Factors that increase pulse pressure include:
-a less compliant aorta (this tends to occur with advancing age)
-increased stroke volume
Aortic stenosis would decrease stroke volume as end systolic volume would increase.
This is because of an increase in afterload, an increase in resistance that the heart must pump against due to a hard stenotic valve.

Impaired ventricular relaxation reduces diastolic filling and therefore preload.

Decreased blood volume decreases preload due to reduced venous return.

Heart failure is characterized by reduced ejection fraction and therefore stroke volume.

Cardiac output = stroke volume x heart rate

Left ventricular ejection fraction = (stroke volume / end diastolic LV volume ) x 100%

Stroke volume = end diastolic LV volume – end systolic LV volume

Pulse pressure (is increased by stroke volume) = Systolic Pressure – Diastolic Pressure

Systemic vascular resistance = mean arterial pressure / cardiac output
Factors that increase pulse pressure include:
-a less compliant aorta (this tends to occur with advancing age)
-increased stroke volume
Aortic stenosis would decrease stroke volume as end systolic volume would increase.
This is because of an increase in afterload, an increase in resistance that the heart must pump against due to a hard stenotic valve.

Staphylococcus aureus infection is the most likely cause.

Surgical site infections (SSI) occur when there is a breach in tissue surfaces and allow normal commensals and other pathogens to initiate infection. They are a major cause of morbidity and mortality.

SSI comprise up to 20% of healthcare associated infections and approximately 5% of patients undergoing surgery will develop an SSI as a result.
The organisms are usually derived from the patient’s own body.

Measures that may increase the risk of SSI include:
-Shaving the wound using a single use electrical razor with a disposable head
-Using a non iodine impregnated surgical drape if one is needed
-Tissue hypoxia
-Delayed prophylactic antibiotics administration in tourniquet surgery, patients with a prosthesis or valve, in clean-contaminated surgery of in contaminated surgery.

Measures that may decrease the risk of SSI include:
1. Intraoperatively
– Prepare the skin with alcoholic chlorhexidine (Lowest incidence of SSI)
-Cover surgical site with dressing

In contrast to previous individual RCT’s, a recent meta analysis has confirmed that administration of supplementary oxygen does not reduce the risk of wound infection and wound edge protectors do not appear to confer benefit.

2. Post operatively
Tissue viability advice for management of surgical wounds healing by secondary intention

Use of diathermy for skin incisions
In the NICE guidelines the use of diathermy for skin incisions is not advocated. Several randomised controlled trials have been undertaken and demonstrated no increase in risk of SSI when diathermy is used.

The extrinsic pathway is best assessed by the PT time.

D-dimer is a fibrin degradation product which is raised in the presence of blood clots.

A 50:50 mixing study is used to assess if a prolonged PT or aPTT is due to factor deficiency or a factor inhibitor.

The thrombin time is a test used to assess fibrin formation from fibrinogen in plasma. Factors that prolong the thrombin time include heparin, fibrin degradation products, and fibrinogen deficiency.

Intrinsic pathway – Best assessed by APTT. Factors 8,9,11,12 are involved. Prolonged aPTT can be seen in haemophilia and use of heparin.

Extrinsic pathway – Best assessed by Increased PT. Factor 7 involved.

Common pathway – Best assessed by APTT & PT. Factors 2,5,10 involved.

Vitamin K dependent factors are factors 2,7,9,10

With regards to compensatory response to blood loss, the following sequence of events take place:

1. Decrease in venous return, right atrial pressure and cardiac output
2. Baroreceptor reflexes (carotid sinus and aortic arch) are immediately activated
3. There is decreased afferent input to the cardiovascular centre in medulla. This inhibits parasympathetic reflexes and increases sympathetic response
4. This results in an increased cardiac output and increased SVR by direct sympathetic stimulation. There is increased circulating catecholamines and local tissue mediators (adenosine, potassium, NO2)
5. Fluid moves into the intravascular space as a result of decreased capillary hydrostatic pressure absorbing interstitial fluid.

A slower response is mounted by the hypothalamus-pituitary-adrenal axis.
6. Reduced renal blood flow is sensed by the intra renal baroreceptors and this stimulates release of renin by the juxta-glomerular apparatus.
7. There is cleavage of circulating Angiotensinogen to Angiotensin I, which is converted to Angiotensin II in the lungs (by Angiotensin Converting Enzyme ACE)

Angiotensin II is a powerful vasoconstrictor that sets off other endocrine pathways.
8. The adrenal cortex releases Aldosterone
9. There is antidiuretic hormone release from posterior pituitary (also in response to hypovolaemia being sensed by atrial stretch receptors)
10. This leads to sodium and water retention in the distal convoluted renal tubule to conserve fluid
Fluid conservation is also aided by an increased amount of cortisol which is secreted in response to the increase in circulating catecholamines and sympathetic stimulation.

The cardiac muscle’s contractile fibres have a much more stable resting potential than its conductive fibres. In the ventricular fibres it is -90mV and in the atrial fibres it is -80mV.

The cardiac action potential has several phases which have different mechanisms of action as seen below:

Phase 0: Rapid depolarisation – caused by a rapid sodium influx.
These channels automatically deactivate after a few ms. (QRS complex)

Phase 1: caused by early repolarisation and an efflux of potassium.

Phase 2: Plateau – caused by a slow influx of calcium.

Phase 3 – Final repolarisation – caused by an efflux of potassium.

Phase 4 – Restoration of ionic concentrations – The resting potential is restored by Na+/K+ATPase.
There is slow entry of Na+into the cell which decreases the potential difference until the threshold potential is reached. This then triggers a new action potential

Of note, cardiac muscle remains contracted 10-15 times longer than skeletal muscle.

Different sites have different conduction velocities:
1. Atrial conduction – Spreads along ordinary atrial myocardial fibres at 1 m/sec

2. AV node conduction – 0.05 m/sec

3. Ventricular conduction – Purkinje fibres are of large diameter and achieve velocities of 2-4 m/sec, the fastest conduction in the heart. This allows a rapid and coordinated contraction of the ventricles

Cardiac output = stroke volume x heart rate

Left ventricular ejection fraction = (stroke volume / end diastolic LV volume ) x 100%

Stroke volume = end diastolic LV volume – end systolic LV volume

Pulse pressure = Systolic Pressure – Diastolic Pressure

Systemic vascular resistance = mean arterial pressure / cardiac output
Factors that increase pulse pressure include:
-a less compliant aorta (this tends to occur with advancing age)
-increased stroke volume

Even though aprotinin reduces fibrinolysis and therefore bleeding, there is an associated increased risk of death. It was withdrawn in 2007.
Protein C is dependent upon vitamin K and this may paradoxically increase the risk of thrombosis during the early phases of warfarin treatment.

The coagulation cascade include two pathways which lead to fibrin formation:
1. Intrinsic pathway – these components are already present in the blood
Minor role in clotting
Subendothelial damage e.g. collagen
Formation of the primary complex on collagen by high-molecular-weight kininogen (HMWK), prekallikrein, and Factor 12
Prekallikrein is converted to kallikrein and Factor 12 becomes activated
Factor 12 activates Factor 11
Factor 11 activates Factor 9, which with its co-factor Factor 8a form the tenase complex which activates Factor 10

2. Extrinsic pathway – needs tissue factor that is released by damaged tissue)
In tissue damage:
Factor 7 binds to Tissue factor – this complex activates Factor 9
Activated Factor 9 works with Factor 8 to activate Factor 10

3. Common pathway
Activated Factor 10 causes the conversion of prothrombin to thrombin and this hydrolyses fibrinogen peptide bonds to form fibrin. It also activates factor 8 to form links between fibrin molecules.

4. Fibrinolysis
Plasminogen is converted to plasmin to facilitate clot resorption

With respect to oxygen transport in cells, almost all oxygen is transported within erythrocytes. There is limited solubility and only 1% is carried as solution. Thus, the amount of oxygen transported depends upon haemoglobin concentration and its degree of saturation.

Haemoglobin is a globular protein composed of 4 subunits. Haem is made up of a protoporphyrin ring surrounding an iron atom in its ferrous state. The iron can form two additional bonds – one is with oxygen and the other with a polypeptide chain.
There are two alpha and two beta subunits to this polypeptide chain in an adult and together these form globin. Globin cannot bind oxygen but can bind to CO2 and hydrogen ions.
The beta chains are able to bind to 2,3 diphosphoglycerate. The oxygenation of haemoglobin is a reversible reaction. The molecular shape of haemoglobin is such that binding of one oxygen molecule facilitates the binding of subsequent molecules.

The oxygen dissociation curve (ODC) describes the relationship between the percentage of saturated haemoglobin and partial pressure of oxygen in the blood.
Of note, it is not affected by haemoglobin concentration.

Chronic anaemia causes 2, 3 DPG levels to increase, hence shifting the curve to the right

Haldane effect – Causes the ODC to shift to the left. For a given oxygen tension there is increased saturation of Hb with oxygen i.e. Decreased oxygen delivery to tissues.
This can be caused by:
-HbF, methaemoglobin, carboxyhaemoglobin
-low [H+] (alkali)
-low pCO2
-ow 2,3-DPG
-ow temperature

Bohr effect – causes the ODC to shifts to the right = for given oxygen tension there is reduced saturation of Hb with oxygen i.e. Enhanced oxygen delivery to tissues. This can be caused by:
– raised [H+] (acidic)
– raised pCO2
-raised 2,3-DPG
-raised temperature

With respect to oxygen transport in cells, almost all oxygen is transported within erythrocytes. There is limited solubility and only 1% is carried as solution. Thus, the amount of oxygen transported depends upon haemoglobin concentration and its degree of saturation.

Haemoglobin is a globular protein composed of 4 subunits. Haem is made up of a protoporphyrin ring surrounding an iron atom in its ferrous state. The iron can form two additional bonds – one is with oxygen and the other with a polypeptide chain.
There are two alpha and two beta subunits to this polypeptide chain in an adult and together these form globin. Globin cannot bind oxygen but can bind to CO2 and hydrogen ions.
The beta chains are able to bind to 2,3 diphosphoglycerate. The oxygenation of haemoglobin is a reversible reaction. The molecular shape of haemoglobin is such that binding of one oxygen molecule facilitates the binding of subsequent molecules.

The oxygen dissociation curve (ODC) describes the relationship between the percentage of saturated haemoglobin and partial pressure of oxygen in the blood.
Of note, it is not affected by haemoglobin concentration.

Chronic anaemia causes 2, 3 DPG levels to increase, hence shifting the curve to the right

Haldane effect – Causes the ODC to shift to the left. For a given oxygen tension there is increased saturation of Hb with oxygen i.e. Decreased oxygen delivery to tissues.
This can be caused by:
-HbF, methaemoglobin, carboxyhaemoglobin
-low [H+] (alkali)
-low pCO2
-ow 2,3-DPG
-ow temperature

Bohr effect – causes the ODC to shifts to the right = for given oxygen tension there is reduced saturation of Hb with oxygen i.e. Enhanced oxygen delivery to tissues. This can be caused by:
– raised [H+] (acidic)
– raised pCO2
-raised 2,3-DPG
-raised temperature

Cardiac conduction

Phase 0 – Rapid depolarization. Opening of fast sodium channels with large influx of sodium

Phase 1 – Rapid partial depolarization. Opening of potassium channels and efflux of potassium ions. Sodium channels close and influx of sodium ions stop

Phase 2 – Plateau phase with large influx of calcium ions. Offsets action of potassium channels. The absolute refractory period

Phase 3 – Repolarization due to potassium efflux after calcium channels close. Relative refractory period

Phase 4 – Repolarization continues as sodium/potassium pump restores the ionic gradient by pumping out 3 sodium ions in exchange for 2 potassium ions coming into the cell. Relative refractory period

Cardiac output = stroke volume x heart rate

Left ventricular ejection fraction = (stroke volume / end diastolic LV volume ) x 100%

Stroke volume = end diastolic LV volume – end systolic LV volume

Pulse pressure = Systolic Pressure – Diastolic Pressure

Systemic vascular resistance = mean arterial pressure / cardiac output
Factors that increase pulse pressure include:
-a less compliant aorta (this tends to occur with advancing age)
-increased stroke volume